AP BIOLOGY · UNIT 2 · CELL STRUCTURE AND FUNCTION

A membrane that builds itself, and chooses what crosses

Phospholipids drop into water and a membrane forms with no instructions. See why, set proteins, cholesterol and sugars into it, work out what crosses it on its own and what needs help, and find what a wall adds outside it.

AP Biology 2.3, 2.42 lessons6 chaptersdry lab

Start learningRun the dry labTeach it

Four kinds of particle meet the same bilayer. Watch which slip straight through, which cross only now and then, and which bounce off every time.
NavigationBy the end you cantap a goal to go to its chapter

01Learn

Six chapters and a dry lab. Read a chapter, play its figure or tap its parts, and make each prediction before you open the answer.

NavigationChapterstap a chapter to jump to it
  1. 1A barrier that builds itself
  2. 2Proteins in the bilayer
  3. 3A fluid mosaic
  4. 4Not too stiff, not too runny
  5. 5What gets through
  6. 6A wall outside the membrane

2.3.A Plasma membrane

A barrier that builds itself

  • A phospholipid’s charged phosphate head is hydrophilic: it mixes with water.
  • Its two nonpolar fatty acid tails are hydrophobic: water pushes them out.
  • In a phospholipid bilayer the heads face the water on each side and the tails face each other in the middle.
  • The bilayer forms by itself: water squeezes the tails together, the hydrophobic effect.

The detail

  • A phospholipid has two ends that want different things.
  • A cell has water on both sides of its membrane: the cytoplasm inside, the tissue fluid or pond outside.
  • Nothing has to arrange the phospholipids. Water holds itself together by hydrogen bonds and squeezes the tails together, out of the water.
  • It is the same hydrophobic effect that folds a protein.

Try it

  • Three thought experiments test the idea; the first is the predict box.
  • Try the others on paper: what would phospholipids do with water on one side only?
  • And why does a torn membrane close up by itself?

Watch out

  • The tails are not held together by bonds between them. Water pushes them together, because it hydrogen bonds with itself and not with them.

A phospholipid has two ends that want different things. Its phosphate head is charged, so it is hydrophilic: it mixes with water. Its two fatty acid tails are nonpolar, so they are hydrophobic: water pushes them out.

A cell has water on both sides of its membrane: the cytoplasm inside, the tissue fluid or pond outside. So phospholipids settle into a phospholipid bilayer: heads facing the water on each side, tails facing each other in the middle, out of the water. Nothing has to arrange them. Water holds itself together by hydrogen bonds and squeezes the tails together, the same hydrophobic effect that folds a protein.

Three thought experiments test the idea; the first is the predict box below. Try the others on paper: what would phospholipids do with water on one side only, and why does a torn membrane close up by itself?

  • Heads: hydrophilic, facing the water on each side.
  • Tails: hydrophobic, facing each other in the middle.
  • The bilayer forms by itself, pushed together by water.
Watch out The tails are not held together by bonds between them. Water pushes them together, because it hydrogen bonds with itself and not with them.

Phospholipids are shaken in oil instead of water. How would they arrange themselves?

Nothing places the molecules: watch where the tails end up, then turn the labels off and name each part.

2.3.A Plasma membrane

Proteins in the bilayer

  • Proteins do most of a membrane’s work: they carry substances across, receive signals, join cells together and speed up reactions.
  • Integral proteins are set into the bilayer, and many span it from one side to the other.
  • Peripheral proteins sit on its surface, held to the heads or to an integral protein.
  • The part of an integral protein among the tails has nonpolar R groups (hydrophobic). Parts facing the water have charged and polar R groups (hydrophilic).

The detail

  • Where a protein sits depends on its amino acids.
  • The hydrophobic region of an integral protein stays among the tails.
  • A peripheral protein is hydrophilic all over, so it never enters the core.

Try it

  • Tap each protein for where it sits and what kind it is.

Links across the course

  • Amino acids and their R groups are in Unit 1.

Watch out

  • A protein that is set into one layer only is still integral: part of it is held among the tails.

Proteins do most of a membrane's work: they carry substances across, receive signals, join cells together and speed up reactions. Integral proteins are set into the bilayer, and many span it from one side to the other. Peripheral proteins sit on its surface, held to the heads or to an integral protein.

Where a protein sits depends on its amino acids (Unit 1). The part of an integral protein that crosses the tails has amino acids with nonpolar R groups: it is hydrophobic, so it stays among the tails. The parts that stick out into the water have charged and polar R groups: they are hydrophilic. A peripheral protein is hydrophilic all over, so it never enters the core.

Tap each protein for where it sits and what kind it is.

  • Integral proteins: in the bilayer, often spanning it.
  • Peripheral proteins: on the surface.
  • Hydrophobic regions (nonpolar R groups) lie among the tails; hydrophilic regions face the water.
Watch out A protein that is set into one layer only is still integral: part of it is held among the tails.

A membrane protein has a stretch of about twenty amino acids with nonpolar R groups in the middle of its chain, and charged amino acids at both ends. Where is it?

integralperipheralOUTSIDECYTOPLASM

Tap a protein to see where it sits and what kind it is.

2.3.B Plasma membrane

A fluid mosaic

  • The fluid mosaic model: a framework of phospholipids with proteins, cholesterol (in eukaryotes), glycoproteins and glycolipids set in it.
  • A glycoprotein is a protein with sugars; a glycolipid is a lipid with sugars. Their sugars face outward.
  • It is fluid because nothing is fixed: the molecules move sideways within the membrane.
  • The sugar chains on the outer surface act as name tags for cell recognition.

The detail

  • The other molecules sit in the phospholipids like the tiles of a mosaic.
  • Phospholipids drift sideways past each other millions of times a second, and most proteins drift too.
  • A membrane behaves more like a film of oil than a skin.
  • That is what lets it seal itself when torn, and bud off or take in vesicles.
  • Each cell type has its own pattern of sugar chains, so cells can recognize each other, and the immune system can tell your cells from invaders.

Examples

  • ABO blood groups are differences in the sugar chains on red blood cells.

Links across the course

  • Budding off and taking in vesicles is in the next guide.

Watch out

  • The sugar chains are on the outer surface only. The inside of the membrane, facing the cytoplasm, has none.

The fluid mosaic model describes a membrane as a framework of phospholipids with other molecules set in it, like the tiles of a mosaic: proteins, cholesterol (in eukaryotes), and molecules with chains of sugars attached. A glycoprotein is a protein with sugars; a glycolipid is a lipid with sugars. Their sugars face outward.

It is fluid because nothing is fixed. Phospholipids drift sideways past each other millions of times a second, and most proteins drift too. A membrane behaves more like a film of oil than a skin. That is what lets it seal itself when torn, and bud off or take in vesicles (the next guide).

The sugar chains on the outer surface act as name tags. Each cell type has its own pattern, so cells can recognize each other, and the immune system can tell your cells from invaders. ABO blood groups are differences in the sugar chains on red blood cells.

  • Phospholipid framework with proteins, cholesterol, glycoproteins and glycolipids.
  • Fluid: the molecules move sideways within the membrane.
  • Glycoproteins and glycolipids: sugars outside, for cell recognition.
Watch out The sugar chains are on the outer surface only. The inside of the membrane, facing the cytoplasm, has none.

A mouse cell and a human cell are fused, each with its membrane proteins tagged a different color. An hour later, how are the colors spread?

glycoproteinglycolipidchannelperipheralcholesterolOUTSIDECYTOPLASM

Tap any part of the membrane to see what it is.

2.3.B Plasma membrane

Not too stiff, not too runny

  • A membrane only works at the right fluidity: too stiff and its proteins and vesicles cannot work; too runny and it leaks.
  • Temperature: warmer is more fluid, colder is stiffer.
  • Saturated tails are straight and pack tightly, so the membrane is stiffer; unsaturated tails have kinks that keep it fluid.
  • Cholesterol buffers the change, keeping fluidity steady across temperatures.

The detail

  • Too stiff, and its proteins cannot move or change shape, and vesicles cannot form.
  • Warmth makes the phospholipids move faster, and cold slows them.
  • Unsaturated tails have kinks at their double bonds, which keep them apart.
  • Cholesterol’s small rigid rings sit among the tails.
  • When it is warm they hold the phospholipids back, so the membrane stays firm; when it is cold they stop the tails packing together, so it stays fluid.

Examples

  • Organisms adjust: plants and bacteria in the cold make more unsaturated fatty acids.
  • The fat in a reindeer’s legs, which stay cold, is more unsaturated than the fat near its warm body.

Watch out

  • “Cholesterol always makes a membrane stiffer.” It does when warm; in the cold it keeps the membrane fluid. It steadies fluidity both ways.

A membrane only works at the right fluidity. Too stiff, and its proteins cannot move or change shape, and vesicles cannot form. Too runny, and it leaks. Three things set it. Temperature: warmth makes the phospholipids move faster, and cold slows them. Fatty acid tails: saturated tails are straight and pack tightly, so the membrane is stiffer; unsaturated tails have kinks at their double bonds, which keep them apart and the membrane fluid.

Cholesterol buffers the change. It sits in one layer of the bilayer at a time: its small OH group by the phospholipid heads, its rigid rings among the tails. When it is warm they hold the phospholipids back, so the membrane stays firm; when it is cold they stop the tails packing together, so it stays fluid.

Organisms adjust. Plants and bacteria in the cold make more unsaturated fatty acids, and the fat in a reindeer's legs, which stay cold, is more unsaturated than the fat near its warm body.

Cholesterol buffers fluidity
TemperatureEffect of cholesterolWhy
Lowincreases fluidityIt sits between the phospholipids and keeps their tails apart, so they cannot pack tightly and the membrane does not become too rigid.
Highdecreases fluidityIts rigid rings hold the neighboring tails and restrain how much the phospholipids move, so the membrane does not become too fluid.
  • Warmer: more fluid. Colder: stiffer.
  • Unsaturated tails, kinked, keep a membrane fluid; saturated tails pack it tight.
  • Cholesterol keeps fluidity steady across temperatures.
Watch out "Cholesterol always makes a membrane stiffer." It does when warm; in the cold it keeps the membrane fluid. It steadies fluidity both ways.

A fish that lives in icy water is compared with one from a warm reef. What would you expect of its membranes?

straight tails pack tightlykinks keep the tails apartcholesterolOUTSIDE

2.4.A Membrane permeability

What gets through

  • A membrane separates the inside of the cell from the outside and lets only some things across: it is selectively permeable, and its structure decides which.
  • Small nonpolar molecules (O2, CO2, N2) dissolve in the core and pass straight through.
  • Small polar molecules with no charge, such as water, cross too, but only in small amounts.
  • Ions and large polar molecules are turned back, so they cross through channel and carrier (transport) proteins.

The detail

  • To cross the bilayer on its own, a molecule must pass through the hydrophobic core of tails.
  • Ions such as Na+ and K+, and large polar molecules such as glucose, cannot cross: the hydrophobic core will not let a charged or strongly polar molecule through.
  • So a cell crosses its own barrier with proteins, which give hydrophilic substances a way through.
  • Each protein fits only some substances, so the cell chooses what comes in.

Links across the course

  • How channel and carrier proteins work is the next guide.

Watch out

  • Size is not the whole story. A sodium ion is smaller than an oxygen molecule but cannot cross the bilayer: its charge holds a shell of water around it, and the hydrophobic core will not let it in.

A membrane separates the inside of the cell from the outside, and lets only some things across: it is selectively permeable. Its structure decides which. To cross the bilayer on its own, a molecule must pass through the hydrophobic core of tails.

Small nonpolar molecules, such as oxygen, carbon dioxide and nitrogen, dissolve in the core and pass straight through. Small polar molecules with no charge, such as water, cross too, but only in small amounts. Ions, such as Na+ and K+, and large polar molecules, such as glucose, are turned back: the hydrophobic core will not let a charged or strongly polar molecule through.

So a cell crosses its own barrier with proteins. Channel and carrier proteins give hydrophilic substances a way through, and because each fits only some substances, the cell chooses what comes in. How they work is the next guide.

  • Small nonpolar: O2, CO2, N2 pass freely.
  • Water: small amounts through the bilayer.
  • Ions and large polar molecules need channel or transport proteins.
Watch out Size is not the whole story. A sodium ion is smaller than an oxygen molecule but cannot cross the bilayer: its charge holds a shell of water around it, and the hydrophobic core will not let it in.

Which will cross a pure phospholipid bilayer, with no proteins in it, fastest?

oxygencarbon dioxidewaterslowlyNa⁺K⁺ionin its shell of waterglucoseOUTSIDECYTOPLASM
  1. Oxygen diffuses in and carbon dioxide out, between the phospholipids.
  2. Water is polar but small: a little crosses the bilayer, slowly.
  3. Ions and polar molecules such as glucose cannot pass the hydrophobic core.

2.4.B Membrane permeability

A wall outside the membrane

  • Plants, fungi and most prokaryotes have a cell wall outside the plasma membrane, made of complex carbohydrates.
  • Plant walls are cellulose, fungal walls chitin, bacterial walls peptidoglycan.
  • A wall is a structural boundary: it gives the cell its shape, supports the plant and stops the cell bursting when water rushes in.
  • It is also a barrier to some substances: very large molecules and many viruses cannot get through.

The detail

  • Cellulose: long chains of glucose lying side by side.
  • Chitin: chains of glucose units carrying nitrogen.
  • Peptidoglycan: sugar chains cross-linked by short peptides.
  • Water, ions and small molecules pass a wall freely. The membrane inside still does the choosing.
  • Animal cells have no wall. Their support comes from the cytoskeleton inside and from the material around them, such as collagen.

Links across the course

  • Why a wall stops a cell bursting when water rushes in is in a later guide, on tonicity.

Watch out

  • A wall is not a second membrane. It has no bilayer and controls little: water and dissolved substances pass through its spaces.

Plants, fungi and most prokaryotes have a cell wall outside the plasma membrane. In every case it is made of complex carbohydrates. Plant walls are cellulose, long chains of glucose lying side by side. Fungal walls are chitin, chains of glucose units carrying nitrogen. Bacterial walls are peptidoglycan, sugar chains cross-linked by short peptides.

A wall is a structural boundary. It gives the cell its shape, supports the plant, and stops the cell bursting when water rushes in (a later guide on tonicity). It is also a barrier to some substances: very large molecules and many viruses cannot get through, though water, ions and small molecules pass it freely. The membrane inside still does the choosing.

Animal cells have no wall. Their support comes from the cytoskeleton inside and from the material around them, such as collagen.

  • Plant walls: cellulose. Fungi: chitin. Bacteria: peptidoglycan. All complex carbohydrates.
  • A wall gives shape and support and resists bursting.
  • Water and small molecules pass a wall; very large ones may not.
Watch out A wall is not a second membrane. It has no bilayer and controls little: water and dissolved substances pass through its spaces.

Penicillin stops bacteria building peptidoglycan. Why does it kill bacteria but leave human cells unharmed?

plantcelluloseglucose chainsside by sidefunguschitinglucose unitswith nitrogenbacteriumpeptidoglycansugar chainswith peptides
In each cell the outer band is the wall and the line just inside it the plasma membrane.

02Dry lab: Leaky beets

Beet cells keep their red pigment behind two membranes. Heat cylinders of beet or soak them in ethanol, and read how much red escapes into the water. Find where the membranes give way.

20°40°1 cm00:0050 °C0.385530 nmWATER BATHEARLIER TUBESCOLORIMETER
Hold a rinsed cylinder of beet in water at a set temperature, or in ethanol, for 30 minutes. Then read how red the water has turned in a colorimeter at 530 nm.
Your questionHow do temperature and ethanol affect the permeability of beet cell membranes to their red pigment? Predict before you start: is there a temperature where it suddenly leaks?
What you can changeThe temperature of the water, from 0 to 80 °C, or the concentration of ethanol, from 0 to 70%. Each go is one fresh cylinder, so three goes are three repeats. You can also skip rinsing the cylinder, to see why every method rinses it.
What to recordThe absorbance of the water at 530 nm for every cylinder, its color, and the mean at each setting. Graph mean absorbance against temperature or ethanol. The readings are modeled on real class results, with real scatter.

Find out

  • A control first. Three rinsed cylinders in water at 20 °C. How red does the water get with the membranes intact?
  • Temperature. Three cylinders at each temperature from 0 to 80 °C. Where does the leaking start, and where does it level off?
  • Ethanol. The same with ethanol from 0 to 70%. Does a solvent break the membrane at room temperature?
  • Rinse or not. One unrinsed cylinder at 20 °C. Where does its extra pigment come from?

Record

  • Every cylinder's setting, whether it was rinsed, and the absorbance of its water at 530 nm.
  • The mean of the three at each setting, and the range.
  • A graph of mean absorbance against temperature, and one against ethanol concentration.
  • One sentence for each: what has happened to the phospholipids and the proteins where the line rises.

The water stays almost clear up to 40 °C and turns red quickly above 50 °C. Why is there a sudden rise rather than a steady one?

Pigment from a cylinder held at 0 °C is lower even than at 20 °C. What does that tell you about the membrane?

Back to membranes

Heat and ethanol both turned the water red. Use the fluid mosaic model to explain what keeps the pigment in, and what each treatment does to the membrane.

03Check

A fresh paper from the exam bank on this guide's topics each time: past-paper style questions, marked as you go, and saved to your Exam practice progress when you are signed in. It opens on biologybybradford.com, so it needs the internet.

Exam practice

Exam questions on 2.3, 2.4, marked

Start 15 marks of exam questionsYour exam practice

04Downloads

This file is the guide, saved to run without the internet.

Saved from biologybybradford.com/guides/ap-biology-unit-2-membranes-and-permeability, where the guide is kept up to date with the notes, the revision sheet and, for the teacher, the lesson plans and slides.

05Teacher resources

The guide as two one-hour lessons. Each has a plan to print (the timings, what to project and where to stop, the activities with what they need, what students get wrong) and slides to teach it from, in the same order, with the teacher's moves in the notes.

LessonCoversFocusChaptersLesson planSlides
1A membrane from scratch 2.3.A, 2.3.B60 min Phospholipids and the bilayer, integral and peripheral proteins, the fluid mosaic model with cholesterol, glycoproteins and glycolipids, and fluidity 1, 2, 3, 4 Lesson planPDF 655 KB SlidesPPTX 4.0 MB
2What gets through 2.4.A, 2.4.B60 min Selective permeability: what crosses the bilayer and what needs proteins, and cell walls of plants, fungi and prokaryotes, with the beet pigment lab 5, 6, dry lab Teacher pass: Lesson planPDF 631 KB Teacher pass: SlidesPPTX 440 KB

Lesson 1 is free with a free account. The other plans and slides, for every guide, come with the Teacher pass.

The note template, the revision sheet and the offline copy are in Downloads, for you and the class.

PRACTICE AND REVIEW

Make it for your class, or set it

Build for your class

Already on the site for Unit 2

Card sets on splycr

Open a set to host it as a class game, or make a copy to edit.

How this was made. The course structure, the activities and the teaching choices come from my own classroom, my presentations and my years of teaching IB and AP Biology. I use Claude, an AI, to help write and build the interactive guides, lesson plans, slides and practice questions, and to draw the diagrams and code the interactives. I direct the work and review it against the IB and AP specifications before it goes live. Sources and acknowledgements.