IB BIOLOGY · THEME B · FORM AND FUNCTION

Open to the air

Every animal and plant has to take in one gas and give out another, and both solve it the same way: a large, thin, moist surface, with the gradient across it kept steep. A leaf lets carbon dioxide in through pores that cost it water; your lungs move air in and out over millions of tiny sacs, and your blood carries the oxygen away. The leaf comes first, then the lungs and the blood.

IB Biology B3.1SL and HLAbout 6 hours SL, 1 more HL16 chapters12 chapters at SLdry lab

Start learningRun the dry labTeach it

Follow one breath down the windpipe into the lungs, on to an alveolus and onto haemoglobin, then into a leaf where carbon dioxide diffuses in through a stoma: two gas exchange surfaces, both thin, moist, permeable and large.
NavigationBy the end you cantap a goal to go to its chapter

01Learn

Sixteen chapters: the leaf first (chapters 1 to 6), then the lungs and the blood (chapters 7 to 16). Higher level chapters are badged. Read one, play its figure through or tap its parts, and make each prediction before you open the answer.

NavigationChapterstap a chapter to jump to it
  1. 1Every cell needs a way in
  2. 2A leaf is built for gas exchange
  3. 3Drawing a leaf in plan
  4. 4Guard cells open and close the door
  5. 5Counting stomata
  6. 6The price of gas exchange: transpiration
  7. 7Keeping the gradient steep
  8. 8Down the branching tree
  9. 9One alveolus, close up
  10. 10Pressure moves the air
  11. 11Working harder
  12. 12How much air?
  13. 13A carrier with four hands HL
  14. 14The S-shaped curve HL
  15. 15Foetal against adult HL
  16. 16More carbon dioxide, more oxygen delivered HL

B3.1.1 B3.1.2 Gas exchange in every organism, and the surfaces that do it

Every cell needs a way in

  • Every cell respires, using oxygen and giving out carbon dioxide, so almost every organism swaps the two all the time: gas exchange.
  • Gases cross a surface by diffusion, which is quick across a cell or two and slow over longer distances.
  • As an organism grows, its surface area to volume ratio falls and its centre ends up further from the outside.
  • So a large organism needs a surface made for gas exchange, and a way to carry the gases between that surface and every cell.
  • A gas-exchange surface is permeable, thin, moist and has a large surface area.

The detail

  • Plants respire too, day and night.
  • A leaf in the light also photosynthesises, taking carbon dioxide in and giving oxygen out. In bright light it does this faster than it respires, so overall the leaf takes carbon dioxide in.
  • In the dark the swap runs the other way.
  • Diffusion goes from where a gas is more concentrated to where it is less. Twice as far takes about four times as long.
  • A single cell, or a flatworm a few cells thick, is supplied through its outer surface.
  • As anything grows, its volume grows faster than its surface.

The four properties

  • Permeable: oxygen and carbon dioxide can pass through it.
  • Thin: often one layer of cells, so the gases have only a short way to go.
  • Moist: a gas has to dissolve in water before it can diffuse into a cell.
  • Large surface area: a lot of gas crosses at once.

Links across the course

  • Chapter 9 shows all four properties in a lung’s alveolus. The inside of a leaf has all four (chapter 2). So do the lungs, which come later, with the human body.
  • Linking question: how do multicellular organisms solve the problem of access to materials for all their cells? Chapter 6 answers it for a leaf, and B3.2 for the whole plant.
  • Linking question: what is the relationship between gas exchange and metabolic processes in cells? Chapter 4 answers it.

Watch out

  • “Plants photosynthesise instead of respiring.” Every living plant cell respires, in the light and in the dark.
  • In bright light a leaf photosynthesises faster than it respires, which hides the respiration in its overall gas exchange; in the dark it only respires.

Every living cell respires, and aerobic respiration uses oxygen and gives out carbon dioxide. So almost every organism has to take oxygen in and get rid of carbon dioxide, all the time. That swap is gas exchange. Plants respire too, day and night. A leaf in the light also photosynthesises, taking carbon dioxide in and giving oxygen out, and in bright light it does this faster than it respires, so overall the leaf takes carbon dioxide in. In the dark the swap runs the other way.

Gases cross a surface by diffusion, from where they are more concentrated to where they are less. Diffusion is quick across a cell or two and slow over longer distances: twice as far takes about four times as long. A single cell, or a flatworm a few cells thick, is supplied through its outer surface. But as anything grows, its volume grows faster than its surface, so its surface area to volume ratio falls, and its centre ends up further from the outside. A large organism needs a surface made for gas exchange, and a way to carry the gases between that surface and every cell.

A gas-exchange surface has four properties. It is permeable, so oxygen and carbon dioxide can pass through it. It is thin, often one layer of cells, so the gases have only a short way to go. It is moist, because a gas has to dissolve in water before it can diffuse into a cell. And it has a large surface area, so a lot of gas crosses at once. Chapter 9 shows all four in a lung’s alveolus. The inside of a leaf has all four (chapter 2). So do the lungs, which come later, with the human body.

  • Every organism exchanges gases because every cell respires; a leaf in the light also takes in carbon dioxide for photosynthesis.
  • As an organism gets bigger, its surface area to volume ratio falls and the distance from its centre to the outside rises.
  • A gas-exchange surface is permeable, thin, moist and large.

Remember it The four properties of a gas-exchange surface

  • TooThina short path to cross
  • ManyMoistgases dissolve first
  • PinkPermeablelets the gases through
  • LeavesLarge surface areamore gas crosses at once
Watch out “Plants photosynthesise instead of respiring.” Every living plant cell respires, in the light and in the dark. In bright light a leaf photosynthesises faster than it respires, which hides the respiration in its overall gas exchange; in the dark it only respires.

The 4 cm cube is squashed into a sheet 16 cm by 16 cm and 0.25 cm thick, with the same volume. Compared with the cube, how quickly is every part of it supplied?

Linking questions How do multicellular organisms solve the problem of access to materials for all their cells? Chapter 6 answers it for a leaf, and B3.2 for the whole plant. What is the relationship between gas exchange and metabolic processes in cells? Chapter 4 answers it.
Bigger cube, smaller ratio1 cm2 cm4 cmsurface area6 cm²24 cm²96 cm²volume1 cm³8 cm³64 cm³ratio6 : 13 : 11.5 : 1centre to face0.5 cm1 cm2 cmthe ratio falls ↓the distance rises ↑
  1. A 1 cm cube: a surface of 6 cm² round a volume of 1 cm³, a ratio of 6 : 1. Its centre is 0.5 cm from the nearest face.
  2. Double the side to 2 cm. The surface grows four times, to 24 cm², but the volume grows eight times, to 8 cm³: the ratio halves, to 3 : 1.
  3. Double it again, to 4 cm: 96 cm² round 64 cm³, a ratio of 1.5 : 1. The centre is now 2 cm from the outside.
  4. As a cube grows, each square centimetre of its surface has more volume to supply, from further away: the ratio falls as the distance rises.
Model cubes, not cells: see how far a dye gets into each in the same time. Then change the shape to a sheet and test your prediction.

B3.1.7 Adaptations for gas exchange in leaves

A leaf is built for gas exchange

  • A leaf is broad, a large surface to catch light and take in carbon dioxide, and thin, so gases never have far to go. Its problem is water.
  • The epidermis makes a waxy cuticle over itself, which keeps water in but keeps carbon dioxide out too.
  • Gases get through the stomata: each a pore between two guard cells that can open or close it.
  • Air spaces in the loosely packed spongy mesophyll join every stoma to every cell. The moist walls of the mesophyll cells are the real gas-exchange surface.
  • Veins hold xylem, which brings water to replace what evaporates, and phloem, which carries away the sugars the leaf makes.

The detail

  • A leaf is a plant’s organ of photosynthesis, and so of gas exchange.
  • Wet cells in air lose water by evaporation, and a leaf that lost water from its whole surface would soon wilt.
  • The epidermis is one layer of tightly fitted cells with few or no chloroplasts. Its cells are clear, so light passes through them.
  • One of the stomata is a stoma. Most are in the lower epidermis. Chapter 4 shows how the guard cells work.
  • Under the upper surface is the palisade mesophyll: tall cells packed with chloroplasts, where most of the light is caught.
  • Inside, the cells are wet, and that is the point: carbon dioxide dissolves in the film of water on the mesophyll walls and diffuses into the cells, and oxygen leaves the same way.
  • Gases diffuse thousands of times faster through air than through water, so the air spaces bring the air almost to every wet wall.
  • Every leaf is threaded with veins, which branch so finely that no cell is far from one.

Watch out

  • “Gas exchange happens across the whole surface of the leaf.” The cuticle stops almost all of it.
  • Nearly all the gas exchange of a leaf goes through its stomata, and then across the wet walls of the cells inside.

A leaf is a plant’s organ of photosynthesis, and so of gas exchange. It is broad, which gives it a large surface to catch light and take in carbon dioxide, and thin, so the gases never have far to go. Its problem is water. Wet cells in air lose water by evaporation, and a leaf that lost water from its whole surface would soon wilt.

So the outside of a leaf is waterproofed. The epidermis, one layer of tightly fitted cells with few or no chloroplasts, makes a waxy cuticle over itself. Its cells are clear, so light passes through them. The wax keeps water in, but it keeps carbon dioxide out too, so gases need a way through: the stomata (one is a stoma), each a pore between two guard cells that can open or close it (chapter 4). Most are in the lower epidermis.

Inside, the cells are wet, and that is the point. Under the upper surface is the palisade mesophyll, tall cells packed with chloroplasts, where most of the light is caught. Below it, the cells of the spongy mesophyll are loosely packed, and the air spaces between them join up from every stoma to every cell. The moist walls of these mesophyll cells are the real gas-exchange surface: carbon dioxide dissolves in the film of water on them and diffuses into the cells, and oxygen leaves the same way. Gases diffuse thousands of times faster through air than through water, so the air spaces bring the air almost to every wet wall.

Every leaf is threaded with veins. Each holds xylem, which brings water to replace what evaporates from those wet walls, and phloem, which carries away the sugars the leaf makes. The veins branch so finely that no cell is far from one.

  • The waxy cuticle and the epidermis keep water in, and keep gases out too.
  • Stomata let gases through the epidermis, and guard cells open and close them.
  • Air spaces carry gases from the stomata to every mesophyll cell; the moist walls of those cells are the exchange surface.
  • Veins bring water in through the xylem and take sugars away in the phloem.

Remember it The layers of a leaf, top to bottom

  • CatsCuticlewaterproof wax
  • UsuallyUpper epidermisone clear layer
  • PurrPalisade mesophyllpacked with chloroplasts
  • SoftlySpongy mesophyllloose, with air spaces
  • LazilyLower epidermismost of the stomata
Watch out “Gas exchange happens across the whole surface of the leaf.” The cuticle stops almost all of it. Nearly all the gas exchange of a leaf goes through its stomata, and then across the wet walls of the cells inside.

Why are most of a leaf’s stomata in its lower surface?

waxy cuticleupper epidermispalisade mesophyllspongy mesophylllower epidermisveinxylemphloemair spaceguard cellsstoma waxy cuticleupperepidermispalisademesophyllveinxylemphloemspongymesophyllair spacelowerepidermisguard cellsstoma

Tap a part, or its name, to read what it does. To match a job, pick a card, then the part that does it.

Match it: who does which job?0 of 6 matched

A leaf cut across, upper surface at the top. The cuticle is drawn thicker than it is.

B3.1.8 Distribution of tissues in a leaf

Drawing a leaf in plan

  • A plan diagram shows where the tissues are, not what their cells look like: each tissue drawn as one outlined region.
  • Be able to draw and label a plan of a transverse section of a dicotyledonous leaf.
  • From the top: the upper epidermis with its cuticle, the palisade mesophyll, the spongy mesophyll and the lower epidermis.
  • The veins run through the mesophyll. In each vein the xylem usually lies towards the upper surface and the phloem towards the lower.

The detail

  • A plan is quick to draw and easy to read, and it answers the question the syllabus asks here: where is each tissue? B3.2 asks it again of a stem and a root.
  • A dicot is a flowering plant with two seed leaves and net-veined leaves.
  • The biggest vein, the midrib, makes a bulge underneath, filled round its vein by packing tissue: plain, thin-walled cells that fill the space.

In the exam

  • Outlines of tissues only: no single cells.
  • Proportions and positions as the micrograph or slide you are drawing from shows them, not as a textbook does.
  • Single, sharp, continuous lines in pencil: no sketching, no gaps, no doubled lines.
  • No shading and no colour.
  • Labels to the side, joined by ruled lines that touch the tissue, with no arrowheads, and never crossing.
  • A title that names the organ and the section, and a scale bar or the magnification.

Watch out

  • Draw what the micrograph shows, not what you remember from a textbook.
  • If its palisade layer is thinner than its spongy layer, so is yours: the proportions are checked against the image.

Start with a prediction.

A plan diagram shows where each tissue of an organ is. A student draws every palisade cell in their plan of a leaf. What is wrong?

A plan diagram shows where the tissues are, not what their cells look like. You draw the outline of each tissue as one region, in the same proportions and positions as in the micrograph or slide you are drawing from, and no single cells. That makes a plan quick to draw and easy to read, and it answers the question the syllabus asks here: where is each tissue? B3.2 asks it again of a stem and a root.

In a transverse section of the leaf of a dicotyledonous plant (a dicot: a flowering plant with two seed leaves and net-veined leaves), the tissues lie in layers. From the top: the upper epidermis with its cuticle, the palisade mesophyll, the spongy mesophyll and the lower epidermis. The veins run through the mesophyll, and the biggest, the midrib, makes a bulge underneath, filled round its vein by packing tissue: plain, thin-walled cells that fill the space. In each vein the xylem usually lies towards the upper surface and the phloem towards the lower.

  • Outlines of tissues only: no single cells.
  • Proportions and positions as the micrograph shows them, not as a textbook does.
  • Single, sharp, continuous lines in pencil: no sketching, no gaps, no doubled lines.
  • No shading and no colour.
  • Labels to the side, joined by ruled lines that touch the tissue, with no arrowheads, and never crossing.
  • A title that names the organ and the section, and a scale bar or the magnification.
Watch out Draw what the micrograph shows, not what you remember from a textbook. If its palisade layer is thinner than its spongy layer, so is yours: the proportions are checked against the image.
upper epidermispalisade mesophyllspongy mesophylllower epidermisxylemphloempacking tissuePlan diagram: transverse section of a dicotyledonous leaf, through the midrib0.1 mm
  1. A light micrograph, drawn: a transverse section of a leaf through its midrib, every cell in view. Lignified walls are pink, as the stain colours them; the cuticle is shown yellow and thicker than true scale.
  2. Its plan diagram: one clean outline for each tissue, in the micrograph's proportions, no cells and no shading; ruled label lines, a title and a scale bar.

B3.1.7 Stomatal guard cells

Guard cells open and close the door

  • How open a stoma is depends on how much water its two guard cells hold.
  • Each guard cell’s wall is thicker on the side facing the pore, so turgid guard cells bow apart and open it; flaccid ones straighten and close it.
  • In the light guard cells take up potassium ions (K+) and water follows by osmosis; in the dark they lose them and the pore closes.
  • Open stomata let carbon dioxide in for photosynthesis and water vapour out. Shut, they save water but cut off the carbon dioxide.
  • Abscisic acid closes the stomata when the plant is short of water, even in bright light.

The detail

  • When the guard cells take in water they swell. Their thin outer walls stretch more than the thick inner ones, so the two cells bow apart.
  • The potassium ions come from the cells around the guard cells. They raise the concentration of solutes inside them, so water follows.
  • In the dark the guard cells lose potassium ions, and the water leaves.
  • A plant balances the price of open and shut stomata all day. Chapter 6 follows the water.
  • Abscisic acid is a plant hormone. A plant short of water makes more of it, and it makes the guard cells lose potassium ions.

Links across the course

  • Higher level students meet plant hormones again in C3.1.
  • Linking question: what is the relationship between gas exchange and metabolic processes in cells? The carbon dioxide that comes in through an open stoma is fixed into sugar in the chloroplasts of the mesophyll, and some of the oxygen given off is used in the same cells’ respiration (C1.2).
  • C1.3’s film Follow one carbon atom (a higher level chapter there) takes one carbon from the air into a sugar.

Watch out

  • “Guard cells pull the pore open like muscles.” Plants have no muscles.
  • Guard cells change shape because water moves into or out of them by osmosis, and their uneven walls turn that swelling into a gap.

How open a stoma is depends on how much water its two guard cells hold. Each guard cell’s wall is thicker on the side facing the pore. When the guard cells take in water they swell and become turgid. Their thin outer walls stretch more than the thick inner ones, so the two cells bow apart and the pore opens. When they lose water they become flaccid, straighten, and the pore closes.

What moves the water is potassium. In the light, guard cells take up potassium ions (K+) from the cells around them. That raises the concentration of solutes inside them, and water follows by osmosis. In the dark they lose potassium ions, the water leaves, and the pore closes.

Open or shut, there is a price. Open stomata let carbon dioxide in for photosynthesis, and let water vapour out. Shut, they save water but cut off the carbon dioxide. A plant balances the two all day, and chapter 6 follows the water.

A plant in bright sunshine runs short of water. What do its stomata do?

The signal is a plant hormone, abscisic acid. A plant short of water makes more of it, and it makes the guard cells lose potassium ions, so the stomata close even in bright light. Higher level students meet plant hormones again in C3.1.

  • A guard cell’s wall is thickest on the pore side, so turgid guard cells bow apart and open the stoma.
  • Potassium ions taken up in the light draw water in by osmosis; losing them lets the water out and closes the pore.
  • Abscisic acid closes the stomata when the plant is short of water, even in the light.
Watch out “Guard cells pull the pore open like muscles.” Plants have no muscles. Guard cells change shape because water moves into or out of them by osmosis, and their uneven walls turn that swelling into a gap.
Linking question What is the relationship between gas exchange and metabolic processes in cells? The carbon dioxide that comes in through an open stoma is fixed into sugar in the chloroplasts of the mesophyll, and some of the oxygen given off is used in the same cells’ respiration (C1.2). C1.3’s film Follow one carbon atom (a higher level chapter there) takes one carbon from the air into a sugar.
Guard cells open a stomaK⁺K⁺K⁺K⁺H₂OH₂Oepidermis cellguard cell, flaccidguard cell, turgidchloroplastthick inner wallthick inner wallpore, closedpore, openK⁺ in, water followscut acrossair spaceoutside airporeguard cellthick inner wall Guard cells open a stomaK⁺K⁺K⁺K⁺H₂OH₂Oepidermis cellguard cell, flaccidguard cell, turgidchloroplastthick inner wallthick inner wallpore, closedpore, openK⁺ in, water followsseen from outsidecut acrossair spaceoutside airporeguard cellthick inner wall
  1. A stoma seen from outside the leaf, closed. Its two guard cells are flaccid: they hold little water, lie straight and meet along the pore. Each has chloroplasts, and a thick wall on the side facing the pore.
  2. In the light, potassium ions (K+) move into the guard cells and water follows by osmosis. The cells swell and become turgid. Their thin outer walls stretch more than the thick inner ones, so the cells bow apart and the pore opens.
  3. The same open pair cut across the middle, as in the leaf of chapter 2. The thick walls line the pore, and the pore opens into an air space inside the leaf.
Watch a stoma through a day and a night, then set the soil water to Short and see what it costs the leaf.

B3.1.10 Stomatal density

Counting stomata

  • Stomatal density is the number of stomata in a unit area of leaf surface, usually given per mm².
  • Find it from a micrograph that has a scale, or from a leaf cast of clear nail varnish.
  • Count several random fields at high power. Density is the mean number of stomata per field divided by the area of the field (πr²).
  • Repeated counts make the mean more reliable and show how much the leaf varies.

Making a cast and counting

  • Paint a thin layer of clear nail varnish on the leaf and let it dry. Press clear tape onto it, peel the varnish off with the tape and stick it on a slide.
  • The varnish keeps the shape of the epidermis, guard cells and all.
  • Find the cast at low power, then count at high power.
  • Decide before you start what to do with a stoma cut by the edge of the field of view, and keep to it. One rule, the one used here: count it only if more than half of it is inside.
  • To find the field’s area, measure its diameter with a stage micrometer, a slide ruled in hundredths of a millimetre.
  • Or measure it at low power against a clear ruler and divide by how many times more the high-power objective magnifies.
  • The radius is half the diameter.

Making the count reliable

  • Repeating a measurement makes a result more reliable. Here the repeats are counts of fields at high power.
  • Their spread is real biology, not only error: stomata are not spaced evenly over a leaf, so one field can land on a crowded patch or a sparse one.
  • Choose the fields at random, not the clearest-looking ones, and count enough of them for the mean to settle.
  • Sample more than one leaf, because leaves differ just as fields do.

Examples

  • Five random fields at high power (×400) hold 12, 15, 11, 14 and 13 stomata: a mean of 13.
  • The field is 0.45 mm across, so its radius is 0.225 mm and its area is π × 0.225² = 0.159 mm².
  • The density is 13 ÷ 0.159 ≈ 82 stomata per mm². (The counts are invented, to show the arithmetic.)
  • Then compare. In many dicot leaves the lower surface has far more stomata than the upper, and leaves of one plant grown in sun or in shade can differ.

Watch out

  • Measure the field at the magnification you counted at.
  • Going from a ×10 to a ×40 objective makes the field a quarter as wide and a sixteenth of the area, so dividing a high-power count by the low-power area makes the density sixteen times too small.

Stomatal density is the number of stomata in a unit area of leaf surface, usually given per mm². You can find it from a micrograph that has a scale, or from a leaf cast: paint a thin layer of clear nail varnish on the leaf, let it dry, press clear tape onto it, peel the varnish off with the tape and stick it on a slide. The varnish keeps the shape of the epidermis, guard cells and all.

Find the cast at low power, then count at high power. Decide before you start what to do with a stoma cut by the edge of the field of view (one rule, the one used here: count it only if more than half of it is inside) and keep to it. To turn a count into a density you need the field’s area. Measure its diameter with a stage micrometer, a slide ruled in hundredths of a millimetre, or measure it at low power against a clear ruler and divide by how many times more the high-power objective magnifies. The radius is half the diameter, the area is πr², and the density is the mean count divided by the area.

Why count five fields, chosen at random, instead of one?

Then compare. In many dicot leaves the lower surface has far more stomata than the upper, and leaves of one plant grown in sun or in shade can differ.

  • Stomatal density = mean number of stomata per field ÷ area of the field (πr²), usually per mm².
  • Count several random fields at high power, with a rule for stomata cut by the edge, decided first.
  • Repeated counts make the mean more reliable and show how much the leaf varies.
Nature of science Repeating a measurement makes a result more reliable. Here the repeats are counts of fields at high power, and their spread is real biology, not only error: stomata are not spaced evenly over a leaf, so one field can land on a crowded patch or a sparse one. Choose the fields at random, not the clearest-looking ones, count enough of them for the mean to settle, and sample more than one leaf, because leaves differ just as fields do.
Worked example Five random fields at high power (×400) hold 12, 15, 11, 14 and 13 stomata: a mean of 13. The field is 0.45 mm across, so its radius is 0.225 mm and its area is π × 0.225² = 0.159 mm². The density is 13 ÷ 0.159 ≈ 82 stomata per mm². (The counts are invented, to show the arithmetic.)
Watch out Measure the field at the magnification you counted at. Going from a ×10 to a ×40 objective makes the field a quarter as wide and a sixteenth of the area, so dividing a high-power count by the low-power area makes the density sixteen times too small.

Some stomata lie across the edge of the field, part in and part out. Why decide on a rule for them before you start counting?

At the same magnification, a leaf’s upper surface gives a mean of 3 stomata a field and its lower surface 15. Why can you say the lower surface has five times the density without measuring the field?

Counting stomata in a field0.10.20.30.4stage micrometer, mm1234567891011121312345678910111213a stomaa stomacell outlinecell outline13 countedmore than half in13 countedmore than half inedge of the fieldunder half innot countedunder half innot countedfield across: 0.45 mmso r = 0.225 mmarea = π × 0.225²= 0.159 mm²five fields: 12, 15, 11, 14, 13mean 13density = 13 ÷ 0.159≈ 82 per mm² Counting stomata in a field0.10.20.30.4stage micrometer, mm1234567891011121312345678910111213a stomaa stomacell outlinecell outline13 countedmore than half in13 countedmore than half inedge of the fieldunder half innot countedunder half innot countedfield across: 0.45 mm, so r = 0.225 mmarea = π × 0.225² = 0.159 mm²five fields: 12, 15, 11, 14, 13; mean 13density = 13 ÷ 0.159 ≈ 82 per mm²invented counts, to show the method
  1. A leaf cast at high power: the outlines of the epidermis cells and the stomata, each a pair of guard cells round a pore. Some stomata are cut by the edge of the field.
  2. Count every stoma, keeping to one rule at the edge: count it only if more than half of it is inside. This field holds 13.
  3. A stage micrometer at the same magnification, ruled in hundredths of a millimetre, shows the field is 0.45 mm across: its far edge falls halfway between 0.4 and 0.5. So its radius is 0.225 mm, and its area is π × 0.225² = 0.159 mm².
  4. Count five fields chosen at random: 12, 15, 11, 14 and 13, a mean of 13. Density = mean count ÷ area = 13 ÷ 0.159, about 82 stomata per mm². (Invented counts, to show the method.)
12345Count a stoma only if more than halfof it is inside the circle.FieldLeafSurfaceStomataDensity / mm⁻²
Count the stomata: on the page, tap each one inside the field (the bench numbers it) and press Record; measure the field with a stage micrometer, and the table, the means, the densities and the graph fill in.

B3.1.9 Transpiration as a consequence of gas exchange in a leaf

The price of gas exchange: transpiration

  • Transpiration is the loss of water vapour from the leaves and stems of a plant. It is not a job the plant does: it is a consequence of gas exchange.
  • Water evaporates from the wet walls of the mesophyll cells into the air spaces, then diffuses out through open stomata, down its concentration gradient.
  • Light, a higher temperature, dry air and wind raise the rate; humid air lowers it.
  • A potometer measures water uptake, which stands in for the water lost.

The detail

  • Carbon dioxide can only get into the mesophyll cells by dissolving in the water on their walls, so those walls must be wet.
  • The air inside a leaf is nearly saturated with water vapour, so when the stomata open to let carbon dioxide in, water vapour diffuses out into the drier air outside.
  • A plant can only cut transpiration down by closing its stomata, and that cuts down its gas exchange too.
  • The rate depends on the gradient, and on how open the stomata are.

Each factor in turn

  • Light opens the stomata, so transpiration is fastest by day and slows right down at night.
  • Temperature: warmth speeds up evaporation and diffusion, and the warmer air spaces hold more vapour before they are saturated, so the gradient to the outside air is steeper.
  • Humid air already holds a lot of vapour, so the gradient is shallower and the rate falls.
  • Wind carries away the humid layer of air next to the leaf, which keeps the gradient steep.
  • A potometer is a leafy shoot sealed into a tube of water, with an air bubble that moves along a scale as the shoot takes water up.
  • It measures uptake, not loss, but almost all the water a shoot takes up is lost by transpiration.

Try it

Links across the course

  • How the water lost from the leaves pulls more up the stem is the subject of B3.2.
  • Linking question: how do multicellular organisms solve the problem of access to materials for all their cells? A leaf gets carbon dioxide to every cell through its stomata and air spaces, and loses water doing it. The xylem brings that water up from the roots, and the phloem carries the sugars away: B3.2.
  • The second guiding question for B3.1, the similarities and differences between gas exchange in a flowering plant and in a mammal, is answered at the end of the guide, in Putting it together.

Watch out

  • “Transpiration stops in the dark.” Water evaporates from the wet walls of the mesophyll cells in the dark as well as in the light.
  • In the dark the stomata close, so far less of the vapour gets out, but some still does.
  • By day, light speeds transpiration up in two ways: it opens the stomata, and the sunshine a leaf absorbs warms it, so the water evaporates faster.

Start with a prediction about a leaf in the sun.

One leaf on a plant in sunshine has its lower surface smeared with petroleum jelly. Compared with a leaf left alone, it becomes…

Transpiration is the loss of water vapour from the leaves and stems of a plant. It is not a job the plant does: it is a consequence of gas exchange. Carbon dioxide can only get into the mesophyll cells by dissolving in the water on their walls, so those walls must be wet. Water evaporates from them into the air spaces, and the air inside a leaf is nearly saturated with water vapour. When the stomata open to let carbon dioxide in, water vapour diffuses out, down its concentration gradient into the drier air outside. A plant can only cut it down by closing its stomata, and that cuts down its gas exchange too.

The rate depends on that gradient, and on how open the stomata are. Light opens the stomata, so transpiration is fastest by day and slows right down at night. A higher temperature speeds up evaporation and diffusion, and the warmer air spaces hold more vapour before they are saturated, so the gradient to the outside air is steeper. Humid air already holds a lot of vapour, so the gradient is shallower and the rate falls. Wind carries away the humid layer of air next to the leaf, which keeps the gradient steep. Switch the figure between them.

To measure the rate, use a potometer: a leafy shoot sealed into a tube of water, with an air bubble that moves along a scale as the shoot takes water up. It measures uptake, not loss, but almost all the water a shoot takes up is lost by transpiration, so the uptake stands in for it. The dry lab below is a potometer: try it with the lamp, the fan, the humidity or the temperature. How the water lost from the leaves pulls more up the stem is the subject of B3.2.

  • Transpiration is the loss of water vapour from leaves and stems, a consequence of the open stomata that gas exchange needs.
  • Water evaporates from the wet walls of the mesophyll cells into the air spaces, then diffuses out through the stomata.
  • Light, a higher temperature, dry air and wind raise the rate; humid air lowers it.
  • A potometer measures water uptake, which is close to the water lost.

Remember it Four factors that change the rate of transpiration

  • LazyLightopens the stomata
  • TeensTemperaturefaster evaporation and diffusion
  • HateHumiditymore humid air, a slower rate
  • WednesdaysWindblows the humid air away
Watch out “Transpiration stops in the dark.” Water evaporates from the wet walls of the mesophyll cells in the dark as well as in the light. In the dark the stomata close, so far less of the vapour gets out, but some still does. By day, light speeds transpiration up in two ways: it opens the stomata, and the sunshine a leaf absorbs warms it, so the water evaporates faster.
Linking question How do multicellular organisms solve the problem of access to materials for all their cells? A leaf gets carbon dioxide to every cell through its stomata and air spaces, and loses water doing it. The xylem brings that water up from the roots, and the phloem carries the sugars away: B3.2. The second guiding question for B3.1, the similarities and differences between gas exchange in a flowering plant and in a mammal, is answered at the end of the guide, in Putting it together.
windair spacewet cell wallstoma, openstoma, shutwater vapour outoutside airHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHO windair spacewet cell wallstoma, openstoma, shutwatervapour outoutside airHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHOHHO

Still air. Vapour diffusing out of the pore builds up in a thin layer of humid air under the leaf. The air at the pore is moister, so the gradient is shallower and less vapour diffuses out each second.Humid air. The air outside holds nearly as much vapour as the air spaces, so the gradient is shallow and transpiration slows.Windy. Moving air sweeps the humid layer away, so the air at the pore stays dry, the gradient stays steep and transpiration speeds up.Warm. Water evaporates faster from the wet walls, and warm air holds more vapour, so the air spaces fill with more of it: the gradient is steeper.Dark. The guard cells have lost water and the stoma has closed. The air spaces are still nearly saturated, but very little of the vapour gets out.

One stoma in a leaf’s lower surface, and the air under it. The arrow’s weight shows how fast water vapour leaves.

B3.1.3 Maintenance of concentration gradients at exchange surfaces in animals

Keeping the gradient steep

  • Gases cross an exchange surface by diffusion, which costs the cell nothing but only works while there is a concentration gradient.
  • A dense network of blood vessels: capillaries wrap the surface so closely that almost every part of the wall has blood just behind it.
  • Continuous blood flow carries oxygen away as fast as it arrives and brings carbon dioxide, so the blood at the wall never catches up with the air.
  • Ventilation moves fresh air past the lungs, or water past the gills, so the outside never runs short of oxygen or fills up with carbon dioxide.
  • Ventilation is not gas exchange: ventilation moves the air, and gas exchange is the diffusion across the wall.

The detail

  • The gradient means more oxygen on the air side of the wall than on the blood side, and more carbon dioxide on the blood side than in the air (diffusion is in chapter 1).
  • So an animal keeps both sides of the wall changing. The IB names all three ways it does it.
  • With blood just behind the wall, the gases have a short way to diffuse.
  • What keeps using the oxygen up and making more carbon dioxide is respiration in every cell of the body (C1.2).
  • That is why the blood coming back to the lungs is always lower in oxygen than the air in the alveoli.

Water and gills

  • A fish does the same with water. Its gills are rows of thin filaments, each packed with capillaries.
  • The fish pumps water over them in a one-way stream, in through the mouth and out under the gill covers.
  • Water is a harder medium than air: a litre of it holds about thirty times less oxygen than a litre of air, and it is far denser and more viscous, so a fish must move a large volume of water to get enough.
  • The blood in the gill capillaries flows the opposite way to the water, which keeps a gradient along the whole filament: counter-current flow.

In the exam

  • Counter-current flow is not needed for the exam.

Links across the course

Watch out

  • “Breathing is gas exchange.” Breathing is ventilation; gas exchange is the diffusion across the alveolus wall.
  • “The lungs suck the oxygen in.” Nothing pulls oxygen across: it diffuses down its gradient.
  • “The blood in the lung capillaries is already full of oxygen.” It arrives low, which is why oxygen diffuses into it.
  • “Fish breathe water by taking the oxygen out of the water molecules.” They take up the oxygen gas dissolved in the water; the oxygen in H2O stays where it is.

Gases cross an exchange surface by diffusion, and the cell spends nothing on it (chapter 1). That makes it cheap, but it only works while there is a concentration gradient: more oxygen on the air side of the wall than on the blood side, and more carbon dioxide on the blood side than in the air.

The blood in a capillary beside an alveolus stops flowing, but breathing carries on. What happens to the gradient across the wall?

So an animal keeps both sides of the wall changing. Three things do it, and the IB names all three:

  • A dense network of blood vessels. Capillaries wrap the exchange surface so closely that almost every part of the wall has blood just behind it, a short way to diffuse.
  • Continuous blood flow. Blood carries the oxygen away as fast as it arrives and brings carbon dioxide from the body’s cells, so the blood at the wall never catches up with the air.
  • Ventilation. Moving fresh air (or water) past the surface, so the outside never runs short of oxygen or fills up with carbon dioxide.

Ventilation is not gas exchange. Ventilation moves the air; gas exchange is the diffusion across the wall. What keeps using the oxygen up and making more carbon dioxide is respiration in every cell of the body (C1.2), which is why the blood coming back to the lungs is always lower in oxygen than the air in the alveoli.

Water and gills. A fish does the same with water. Its gills are rows of thin filaments, each packed with capillaries, and the fish pumps water over them in a one-way stream, in through the mouth and out under the gill covers. Water is a harder medium than air: a litre of it holds about thirty times less oxygen than a litre of air, and it is far denser and more viscous, so a fish must move a large volume of water to get enough. The blood in the gill capillaries flows the opposite way to the water, which keeps a gradient along the whole filament (counter-current flow, not needed for the exam, and B3.2 has the fish’s single circulation).

Remember it The three things that keep the gradient steep

  • VeryVesselsa dense network at the wall
  • FastFlowblood that never stops
  • VansVentilationfresh air, or water, at the surface
Watch out “Breathing is gas exchange.” Breathing is ventilation; gas exchange is the diffusion across the alveolus wall. “The lungs suck the oxygen in.” Nothing pulls oxygen across: it diffuses down its gradient. “The blood in the lung capillaries is already full of oxygen.” It arrives low, which is why oxygen diffuses into it. And “fish breathe water by taking the oxygen out of the water molecules.” They take up the oxygen gas dissolved in the water; the oxygen in H2O stays where it is.
Exchange across a thin wallfresh air instale air outwater flows pastair in an alveoluswater at a fish gillwall, two flat cellsthin gill wall, toocapillaryblood flows on, oxygen-richoxygen levelairblood arrivingwateroxygen-richoxygen-poor, dottedoxygencarbon dioxide
  1. An exchange surface: air in an alveolus over a wall two flat cells thick, and a capillary under it.
  2. Oxygen diffuses in across the wall, down its gradient, and carbon dioxide diffuses out. The bars show the oxygen level either side.
  3. The blood keeps flowing: it carries each load of oxygen away and brings blood low in oxygen to the wall, so the gradient stays steep.
  4. Ventilation replaces the air, so the air side stays high in oxygen and low in carbon dioxide.
  5. A fish’s gill works the same way, with water pumped past in place of air. Water holds far less oxygen than air, so a fish must move a lot of it.
One alveolus on its capillary. Answer the question above first, then stop the blood flow or the breathing and watch the gradient bars; set Exercise to Hard to see the gradient hold when the blood arrives poorer in oxygen.

B3.1.4 Adaptations of mammalian lungs for gas exchange

Down the branching tree

  • Air passes down the trachea, into two bronchi, then through over twenty divisions into ever narrower bronchioles, which end in alveoli.
  • The branched network carries air to every part of the lung, so no alveolus is far from an airway.
  • It also packs an enormous surface into the chest: hundreds of millions of alveoli, a high surface area.
  • Every alveolus is wrapped in capillaries, so the lungs hold an extensive capillary bed.
  • The airways themselves exchange no gas: their walls are too thick, so they only carry the air in and out.

The detail

  • Air comes in through your nose or mouth, down the throat and into the trachea, the windpipe.
  • C-shaped rings of cartilage hold the trachea open as the pressure inside it changes.
  • In the chest the trachea divides into two bronchi, one to each lung. Inside the lung each bronchus divides, and divides again.
  • The finest bronchioles end in clusters of tiny air sacs, the alveoli, like bunches of grapes on their stalks.
  • Each alveolus is a fraction of a millimetre across.
  • The bronchioles have no cartilage. Their walls have smooth muscle that can narrow them, which is what goes wrong in an asthma attack.
  • The capillary bed is the third adaptation the IB lists. The fourth, surfactant, is in chapter 9.

Watch out

  • “Gas is exchanged all along the airways.” Only in the alveoli.
  • “The lungs are two empty bags.” They are spongy: a tree of tubes and sacs.
  • “The bronchioles have cartilage rings like the windpipe.” Only the trachea and bronchi do.
  • “Your lungs would cover a tennis court.” A favourite claim, but the measured area is about 70 square metres, about a quarter of a tennis court.

Air comes in through your nose or mouth, down the throat and into the trachea, the windpipe, which C-shaped rings of cartilage hold open as the pressure inside it changes. In the chest it divides into two bronchi, one to each lung. Inside the lung each bronchus divides, and divides again, over twenty times in all, into ever narrower bronchioles. The finest end in clusters of tiny air sacs, the alveoli, like bunches of grapes on their stalks.

A lung is a tree of ever narrower tubes ending in millions of tiny sacs, not one big bag. What does this gain?

Why a tree, then? Two reasons. Branching carries air to every part of the lung, so no alveolus is far from an airway. And it packs an enormous surface into the chest: hundreds of millions of alveoli, each a fraction of a millimetre across. The airways themselves exchange no gas, because their walls are too thick; the trachea, bronchi and bronchioles only carry the air in and out. The bronchioles have no cartilage. Their walls have smooth muscle that can narrow them, which is what goes wrong in an asthma attack.

Every alveolus is wrapped in capillaries, so the lungs hold an extensive capillary bed: the third adaptation the IB lists. The fourth, surfactant, is in chapter 9.

Watch out “Gas is exchanged all along the airways.” Only in the alveoli. “The lungs are two empty bags.” They are spongy: a tree of tubes and sacs. “The bronchioles have cartilage rings like the windpipe.” Only the trachea and bronchi do. And “your lungs would cover a tennis court.” A favourite claim, but the measured area is about 70 square metres, about a quarter of a tennis court.
The lungs in the chestpatient’srightpatient’slefttrachealungsribsintercostalmusclesheartdiaphragmpleural membranespleural fluidlungrib The lungs in the chestpatient’srightpatient’slefttrachealungsribsintercostalmusclesheartdiaphragmpleural membranespleural fluidlungrib
  1. The lungs fill the chest, from just above the collarbones down to the domed diaphragm. The trachea runs down the neck between them, and the heart sits between them on the diaphragm, a little to the patient’s left.
  2. The ribs cage the lungs. Each joins the breastbone at the front, the lower ones through bars of cartilage, and the intercostal muscles fill the gaps between them (chapter 10 shows what they do).
  3. The ringed spot magnified, cut across: two pleural membranes, one covering the lung and one lining the chest wall, with a thin layer of pleural fluid between them. The fluid lets the lung slide as you breathe but holds it to the wall, so the lung follows the chest as it moves (chapter 10).
nasal cavitybehind the nosemouthpharynxthe throatlarynxthe voice boxtracheathe windpipebronchusplural bronchibronchiolealveolusplural alveolicapillarycapillary bedright lungleft lungheartdiaphragmtracheabronchusalveoluscapillarypatient's rightpatient's leftoxygen-richoxygen-poor, dotted
  1. The airways in the frontal plane: the patient's right is on the left of the drawing. Label the parts on the lines.
  2. Air passes the nose or mouth, the pharynx and larynx, the trachea (held open by rings of cartilage), two bronchi and branching bronchioles to clusters of alveoli, each wrapped in capillaries.
  3. A breath in, to one cluster of alveoli. There oxygen crosses the alveolus wall and the capillary wall, each one cell thick, into a red cell; carbon dioxide crosses the other way.
Tap each part to read its job, label it from memory, then follow one oxygen molecule from the nose to a red cell, and a carbon dioxide molecule back out. Answer the question above before you switch on Area.

B3.1.4 Adaptations of mammalian lungs for gas exchange

One alveolus, close up

  • An alveolus is a sac about a quarter of a millimetre across. Its wall is a single layer of very flat cells.
  • Over it lies a net of capillaries whose walls are also one cell thick, so the barrier between air and blood is less than a micrometre thick.
  • It has chapter 1’s four properties: permeable, thin, moist and, with hundreds of millions of alveoli, a large surface area.
  • Cells in the wall make surfactant, a mixture of phospholipids and proteins, which weakens the water’s pull so the alveoli stay open as you breathe out.

The detail

  • Permeable: oxygen and carbon dioxide pass straight through the thin cells of the wall.
  • Thin: one flat cell of alveolus wall and one of capillary wall: a short path to diffuse.
  • Moist: a thin film of water lines every alveolus, and the gases dissolve in it before they diffuse.
  • A large surface area: hundreds of millions of alveoli (chapter 8).
  • The gradient across the wall is kept by the blood and the breathing (chapter 7), not by the alveolus itself.
  • Surfactant is the fourth adaptation the IB names.
  • The film of water inside an alveolus pulls on itself, which tends to draw the wall in. Surfactant spreads over the water and weakens its pull, so the alveoli also open again easily as you breathe in.

Try it

  • Before you look at the figure, draw one from memory: the sac, its wall, the capillary, a red cell. Then check your drawing against it, and tap each part.
  • Match the feature to what it does. Fill in the table under the figure: tap a box and choose; a right answer stays, with its reason.

Links across the course

  • The cells that make surfactant, and the ones that form the thin wall, are B2.3’s pneumocytes (higher level there).

Watch out

  • “Surfactant is a soap that cleans the lungs.” It weakens the water’s pull; it cleans nothing.
  • “The alveolus has a cell wall.” Its “wall” is a layer of animal cells, with no cell walls at all.
  • “The alveoli are dry inside.” They must be moist for the gases to dissolve.
  • “The alveoli keep the gradient steep.” The blood flow and the breathing do.

An alveolus is a sac about a quarter of a millimetre across, and its wall is a single layer of very flat cells. Over it lies a net of capillaries whose walls are also one cell thick, so between the air and the blood there is a barrier less than a micrometre thick where the gases cross. Before you look at the figure, draw one from memory: the sac, its wall, the capillary, a red cell. Then check your drawing against it, and tap each part.

A baby is born weeks early with too little surfactant. What goes wrong in its alveoli when it breathes out?

Chapter 1’s four properties of an exchange surface, one by one:

  • Permeable. Oxygen and carbon dioxide pass straight through the thin cells of the wall.
  • Thin. One flat cell of alveolus wall and one of capillary wall: a short path to diffuse.
  • Moist. A thin film of water lines every alveolus, and the gases dissolve in it before they diffuse.
  • A large surface area. Hundreds of millions of alveoli (chapter 8).

The gradient across the wall is kept by the blood and the breathing (chapter 7), not by the alveolus itself.

Surfactant is the fourth adaptation the IB names. The film of water inside an alveolus pulls on itself, which tends to draw the wall in. Cells in the wall make surfactant, a mixture of phospholipids and proteins, which spreads over the water and weakens its pull. So the alveoli stay open as you breathe out, and open again easily as you breathe in. The cells that make it, and the ones that form the thin wall, are B2.3’s pneumocytes (higher level there).

Watch out “Surfactant is a soap that cleans the lungs.” It weakens the water’s pull; it cleans nothing. “The alveolus has a cell wall.” Its “wall” is a layer of animal cells, with no cell walls at all. “The alveoli are dry inside.” They must be moist for the gases to dissolve. And “the alveoli keep the gradient steep.” The blood flow and the breathing do.

Match the feature to what it does. Fill in the table under the figure: tap a box and choose; a right answer stays, with its reason.

capillary wallred cellsin single fileairin the alveolusalveolus wallone flat cell thickfilm of waterfrom a bronchioleblood flowoxygen-richoxygen-poor, dotted

Tap a part of the alveolus or its capillary.

 What it does for gas exchange
Wall cells, very flat
Thin: a short path to diffuseOne flat cell of alveolus and one of capillary: less than a micrometre where the gases cross.
The film of water
Moist: the gases dissolve firstA gas must dissolve before it can diffuse into a cell.
Hundreds of millions of sacs
A large surface areaAbout 70 square metres of wall in all.
The cells’ membranes
Permeable: the gases pass throughOxygen and carbon dioxide are small and cross membranes easily.
The capillary net
Keeps the gradient steepBlood right behind every part of the wall, always moving on.
Breathing
Keeps the gradient steepFresh air keeps the air side high in oxygen.
Each feature of the alveolus and what it does for gas exchange. Tap a box and choose: a right answer stays, with its reason.
An alveolus breathing in and out, beside its wet lining enlarged. Answer the question above, then set Surfactant to Absent and watch what happens as it breathes out.

B3.1.5 Ventilation of the lungs

Pressure moves the air

  • Air flows from higher pressure to lower. Ventilation changes the pressure in the lungs by changing the size of the chest.
  • Breathing in: the diaphragm contracts, flattens and moves down, and the external intercostal muscles lift the ribs up and out. The pressure falls below the air outside, so air flows in.
  • Breathing out at rest: those muscles relax, the ribs fall back, the diaphragm domes up and the stretched lungs recoil. The pressure rises, so air flows out.
  • Quiet breathing out is passive: no muscle contracts for it.

The detail

  • Your lungs have no muscle that can expand them. They sit in a sealed chest, floored by the diaphragm and walled by the ribs, and they are stretched with it.
  • Breathing in is inspiration; breathing out is expiration.
  • The external intercostal muscles lie between the ribs.
  • The stretched lungs recoil like an elastic band.
  • Boyle’s law: for a fixed amount of gas at a steady temperature, pressure × volume stays the same: double the volume and the pressure halves.
  • In a quiet breath the pressure in your lungs falls only about 1 mmHg below the air outside, a fraction of a per cent, but air flows in until the two are equal: about half a litre of it.

The model lung

  • A bottle with its base cut off, a rubber sheet over the base for the diaphragm, and a balloon inside for a lung. Pull the sheet down and the balloon fills.
  • It leaves a lot out: no ribs and no intercostal muscles, and a balloon that hangs free in the bottle, where a real lung is held against the inside of the chest wall.
  • The film below has one beside the chest.

Watch out

  • “The diaphragm rises when you breathe in.” It contracts, flattens and moves down.
  • “The lungs have muscles and pull themselves open.” They have no muscle that expands them: they follow the chest.
  • “Air is pushed into the lungs.” It flows in because the pressure inside has fallen.
  • “Quiet breathing out is hard work.” At rest it is passive: the muscles relax and the lungs recoil.

Air flows from where its pressure is higher to where it is lower. Ventilation changes the pressure in your lungs by changing the size of your chest. Your lungs have no muscle that can expand them. They sit in a sealed chest, floored by the diaphragm and walled by the ribs, and they are stretched with it.

The diaphragm contracts. What does that do to the pressure of the air in the lungs, and so to the air?

Breathing in (inspiration). The diaphragm contracts: it flattens and moves down. The external intercostal muscles, between the ribs, contract and lift the ribs up and out. The chest gets bigger, the pressure in the lungs falls below the air outside, and air flows in.

Breathing out at rest (expiration). The diaphragm and the external intercostals relax. The ribs fall back, the diaphragm domes up again, and the stretched lungs recoil like an elastic band. The chest gets smaller, the pressure rises above the air outside, and air flows out. No muscle contracts for it: quiet breathing out is passive.

A model lung shows the idea: a bottle with its base cut off, a rubber sheet over the base for the diaphragm, and a balloon inside for a lung. Pull the sheet down and the balloon fills. It leaves a lot out: no ribs and no intercostal muscles, and a balloon that hangs free in the bottle, where a real lung is held against the inside of the chest wall. The film below has one beside the chest.

Boyle’s law For a fixed amount of gas at a steady temperature, pressure × volume stays the same: double the volume and the pressure halves. In a quiet breath the pressure in your lungs falls only about 1 mmHg below the air outside, a fraction of a per cent, but air flows in until the two are equal: about half a litre of it.

Remember it Breathing in, in order

  • DropDiaphragm contractsflattens and moves down
  • LiftExternal intercostals contractribs up and out
  • WidenChest volume risesso the pressure in the lungs falls
  • FillAir flows infrom higher pressure to lower
Watch out “The diaphragm rises when you breathe in.” It contracts, flattens and moves down. “The lungs have muscles and pull themselves open.” They have no muscle that expands them: they follow the chest. “Air is pushed into the lungs.” It flows in because the pressure inside has fallen. And “quiet breathing out is hard work.” At rest it is passive: the muscles relax and the lungs recoil.
a syringe, its nozzle openthe plunger is pushed ina molecule in the airsame pressureinside and outbigger space, lower pressurethe plunger is drawn downa molecule in the airvolume uppressure downbelow the air outsideair flows inuntil the two are equalbreathing inthe chest gets biggerpatient’s rightpatient’s leftribslifted up and outpressure in the lungsbelow the air outsidediaphragmcontracts and flattensbreathing outthe chest gets smallerpatient’s rightpatient’s leftribsfall down and inpressure in the lungsabove the air outsidediaphragmrelaxes and domes up
  1. A syringe, its nozzle open and its plunger pushed in. The air inside is at the same pressure as the air outside.
  2. Draw the plunger down: the space inside gets bigger, so the air in it is at a lower pressure than the air outside, and air flows in until the two are equal.
  3. Your chest works the same way. Breathing in, the diaphragm contracts and flattens and the external intercostals lift the ribs up and out. The chest gets bigger, the pressure in the lungs falls, and air flows in.
  4. Breathing out at rest, the muscles relax: the ribs fall, the diaphragm domes up and the stretched lungs recoil. The chest gets smaller, the pressure rises above the air outside, and air flows out.
A chest cut open from the front, beside the volume of air in the lungs and its pressure. Switch the Muscles on to see which contract, stop at each stage, and open the Model lung to compare.

B3.1.5 Ventilation of the lungs

Working harder

  • Working muscles need more air: each breath goes deeper (a bigger tidal volume) and comes faster (a higher ventilation rate).
  • The external and internal intercostals are an antagonistic pair: the external lift the ribs, the internal pull them down.
  • Forced breathing in: the diaphragm and external intercostals contract harder and further, and muscles in the neck and chest help to lift the ribs higher.
  • Forced breathing out: the internal intercostals pull the ribs down and in, and the abdominal muscles contract and push the diaphragm up. Breathing out is now active.

The detail

  • Run up a flight of stairs and your breathing changes at once: your muscles respire faster, using more oxygen and making more carbon dioxide (tidal volume is in chapter 12).
  • Quiet breathing cannot move that much air. Breathing hard needs muscles that sit still at rest.
  • Muscles can only pull, so each one that moves the ribs one way has a partner that moves them back.
  • Forced breathing out comes with exercise, a cough or blowing out a candle.
  • What tells your body to breathe harder: sensors detect the rise in carbon dioxide in the blood, and the fall in pH that goes with it, and the brain sends faster signals to the breathing muscles.

Try it

  • Which muscles act? Fill in the table under the figure: for each kind of breath, choose the muscles that contract.
  • All four together. Once the table is filled in, the last film shows the chest from the side, where you can see what the front view hides.
  • In it, the fibres of the two intercostal layers run at right angles, and the sternum swings up and forward with the ribs.
  • The wall of the abdomen moves out as the diaphragm flattens and in as its muscles contract.
  • Beside it are the volume and the pressure of the air in the lungs, moving opposite ways, as Boyle’s law says.

Links across the course

  • The control of breathing belongs to C3.1.
  • Your pulse rises with your breathing: B3.2’s pulse bench measures it.

Watch out

  • “You breathe in with muscles and out by relaxing, always.” Only at rest; hard breathing out is muscular too.
  • “The abdominal muscles have nothing to do with breathing.” They drive forced breathing out.
  • “A lack of oxygen is what makes you breathe faster.” In everyday life it is mainly the rise in carbon dioxide, and the fall in pH, that does it.

Run up a flight of stairs and your breathing changes at once. Your muscles respire faster, using more oxygen and making more carbon dioxide, so you need to move more air: each breath goes deeper (a bigger tidal volume, chapter 12) and comes faster (a higher ventilation rate). Quiet breathing cannot do that. Breathing hard needs muscles that sit still at rest.

Quiet breathing out uses no muscle effort. In a sprint, which extra muscles help you breathe out?

Muscles can only pull, so each one that moves the ribs one way has a partner that moves them back: an antagonistic pair. The external intercostals lift the ribs; the internal intercostals pull them down.

  • Forced breathing in. The diaphragm and the external intercostals contract harder and further, and muscles in the neck and chest help to lift the ribs higher.
  • Forced breathing out (exercise, a cough, blowing out a candle). The internal intercostals contract and pull the ribs down and in; the abdominal muscles contract and push the diaphragm up. Breathing out is now active.

Remember it IEEI: Inhale External, Exhale Internal

  • I EInhale: Externalthe external intercostals lift the ribs up and out
  • E IExhale: Internalthe internal intercostals pull the ribs down and in (forced breathing out only)

What tells your body to breathe harder? Sensors detect the rise in carbon dioxide in the blood, and the fall in pH that goes with it, and the brain sends faster signals to the breathing muscles. That control belongs to C3.1. Your pulse rises with your breathing: B3.2’s pulse bench measures it.

Watch out “You breathe in with muscles and out by relaxing, always.” Only at rest; hard breathing out is muscular too. “The abdominal muscles have nothing to do with breathing.” They drive forced breathing out. And “a lack of oxygen is what makes you breathe faster.” In everyday life it is mainly the rise in carbon dioxide, and the fall in pH, that does it.

Which muscles act? Fill in the table under the figure: for each kind of breath, choose the muscles that contract.

All four together. Once the table is filled in, the last film shows the chest from the side, where you can see what the front view hides: the fibres of the two intercostal layers running at right angles, the sternum swinging up and forward with the ribs, and the wall of the abdomen moving out as the diaphragm flattens and in as its muscles contract. Beside it are the volume and the pressure of the air in the lungs, moving opposite ways, as Boyle’s law says.

Answer the question above first. Then set Breathing to Hard and switch the Muscles on: each muscle says whether it is contracting or relaxed.
 Muscles that contract
Quiet breath in
Diaphragm and external intercostalsThe diaphragm flattens and the ribs lift: the chest gets bigger.
Quiet breath out
None: they relax, and the lungs recoilPassive: the stretched lungs and chest spring back.
Hard breath in
Diaphragm, external intercostals and neck musclesThe same muscles, harder, and neck muscles lift the ribs higher.
Hard breath out
Internal intercostals and abdominal musclesRibs pulled down and in; the abdomen pushes the diaphragm up.
The muscles that contract in each kind of breath. Tap a box and choose: a right answer stays, with its reason.
Fill in the table first. Then watch the chest from the side: the two layers of intercostal muscle (drawn in the top three spaces only, so the lung shows behind the rest), the diaphragm and the abdominal muscles, beside the volume and the pressure of the air in the lungs. Set Breathing to Hard to see the second pair take over.

B3.1.6 Measurement of lung volumes

How much air?

  • A spirometer measures how much air you move, drawing the volume breathed against time.
  • Tidal volume: the air moved in or out in one ordinary breath.
  • Inspiratory reserve volume: the extra you can breathe in after an ordinary breath in. Expiratory reserve volume: the extra you can breathe out after an ordinary breath out.
  • Vital capacity: the most air you can move in one breath, from the deepest breath in to the hardest breath out: the other three added together.
  • Make the measurements yourself: take three good deep breaths and use the best or the mean.

The detail

  • A digital spirometer is a mouthpiece on a flow sensor: you breathe through it with a clip on your nose, and the screen draws the trace. Up the trace is a breath in, down a breath out.
  • A cheaper version is an upturned bottle of water: you breathe out through a tube into it, and the air you push out takes the place of the water.
  • Count the breaths in a minute and you have the ventilation rate: about 12 to 16 at rest in an adult, with a tidal volume of about half a litre.
  • Half a litre is 0.5 dm3: a litre is 1 dm3, the unit the IB writes volumes in.
  • Tidal volume × rate gives the air moved in a minute, about 6 litres at rest.
  • Even after your hardest breath out, about a litre of air stays in your lungs, the residual volume: the alveoli never empty completely.
  • A spirometer only measures air that moves through it, so it cannot measure the residual volume, and the vital capacity is not all the air in your lungs.

Making it reliable

  • Zero the sensor first and check it with a known volume, such as a calibration syringe.
  • Lung volumes differ with height, sex, age, fitness and posture, and with effort and technique, so record who the volunteer is and how they sat or stood.
  • One deep breath is not enough: say how far the repeats spread.

Try it

  • Breathing rises with exercise in two ways at once, deeper and faster. The bench after this chapter measures both, and lets you test the two questions in the chapter.

Watch out

  • “Vital capacity is all the air in the lungs.” The residual volume is left behind.
  • “A bigger chest always means a bigger vital capacity.” Height matters most, but age, sex and fitness change it too.
  • “Tidal volume is the same in everyone.” It varies from person to person and with effort.
  • “Exercise only makes you breathe faster.” Each breath gets deeper too.

A spirometer measures how much air you move. A digital one is a mouthpiece on a flow sensor: you breathe through it with a clip on your nose, and the screen draws the volume breathed against time. Up the trace is a breath in, down a breath out. A cheaper version is an upturned bottle of water: you breathe out through a tube into it, and the air you push out takes the place of the water.

After an ordinary breath out you push out as much more air as you can. Which volume is that extra air?

  • Tidal volume: the air moved in or out in one ordinary breath.
  • Inspiratory reserve volume: the extra you can breathe in after an ordinary breath in.
  • Expiratory reserve volume: the extra you can breathe out after an ordinary breath out.
  • Vital capacity: the most air you can move in one breath, from the deepest breath in to the hardest breath out: the other three added together.

Count the breaths in a minute and you have the ventilation rate: about 12 to 16 at rest in an adult, with a tidal volume of about half a litre (0.5 dm3: a litre is 1 dm3, the unit the IB writes volumes in). Tidal volume × rate gives the air moved in a minute, about 6 litres at rest.

Two questions to try first, which the bench after this chapter lets you test.

On the bench, the volunteer breathes out as hard as they can, and the trace stops falling. Are their lungs completely empty?

You want to compare the vital capacities of two volunteers. What makes the comparison fair?

Even after your hardest breath out, about a litre of air stays in your lungs, the residual volume: the alveoli never empty completely. A spirometer only measures air that moves through it, so it cannot measure this, and the vital capacity is not all the air in your lungs.

Making it reliable. Zero the sensor first and check it with a known volume, such as a calibration syringe. Lung volumes differ with height, sex, age, fitness and posture, and with effort and technique, so record who the volunteer is and how they sat or stood. One deep breath is not enough: take three good ones and use the best or the mean, and say how far the repeats spread. Breathing rises with exercise in two ways at once, deeper and faster. The bench after this chapter measures both.

Watch out “Vital capacity is all the air in the lungs.” The residual volume is left behind. “A bigger chest always means a bigger vital capacity.” Height matters most, but age, sex and fitness change it too. “Tidal volume is the same in everyone.” It varies from person to person and with effort. And “exercise only makes you breathe faster.” Each breath gets deeper too.
Reading a spirometer tracemouthpieceflow sensorscreenvolume against time012340102030volume breathed (L)time (s)tidal volume0.45 Linspiratory reserve2.45 Lexpiratory reserve1.00 Lvital capacity3.90 Lthe residual volume never shows
  1. The volunteer breathes through the mouthpiece with a clip on the nose. The sensor is zeroed, and the trace starts flat.
  2. Three ordinary breaths: up the trace is a breath in, down a breath out. The height of one is the tidal volume.
  3. Then the deepest breath in they can take: the trace climbs far above the top of an ordinary breath.
  4. Then out as hard as they can: the trace falls far below where an ordinary breath out ends, before quiet breathing starts again.
  5. The volumes, read between the lines: tidal 0.45 L, inspiratory reserve 2.45 L, expiratory reserve 1.00 L, and the vital capacity, all three together, 3.90 L. The air that never leaves, the residual volume, never shows.
volunteer C, at rest0:5302dm³the whole trial, 53 snose clipflow sensormouthpiecevolunteer Cfemale, 17170 cmTrialTV /dm³IRV /dm³ERV /dm³VC /dm³123mean
Lung volumes. A volunteer sits with a nose clip on and breathes through a mouthpiece into a flow sensor; the screen draws the volume breathed against time: half a minute of normal breathing, one breath in as deep as possible, one out as far as possible, then normal again. Read each volume between two points on the trace; repeat the trial and take the means.

B3.1.11 Adaptations of foetal and adult haemoglobin for the transport of oxygen

A carrier with four hands

  • Oxygen dissolves poorly in water, so almost all of it travels bound to haemoglobin, which packs every red blood cell.
  • Haemoglobin is four polypeptide chains, each folded round a haem group with an iron ion at its centre. Each iron binds one oxygen, so one haemoglobin carries up to four.
  • Cooperative binding: once one oxygen binds, the next binds more easily. It runs in reverse too: once one leaves, the others leave more easily. So haemoglobin loads fully where oxygen is plentiful and lets most go where it is short.
  • Carbon dioxide binds at other sites on the chains, not at the haem: allosteric binding. It changes the shape so the haem groups hold oxygen less tightly.

The detail

  • The plasma could carry only a small fraction of the oxygen an active mammal needs.
  • In the lungs haemoglobin loads oxygen; in the tissues it unloads it.
  • Cooperative binding gives the S-shaped curve of chapter 14.
  • Allosteric binding is binding at a site other than the one a molecule works at: “another site”.
  • Hydrogen ions, which carbon dioxide makes in the blood (chapter 16), bind at other sites too, and do more of this than the carbon dioxide itself.

Links across the course

  • Haemoglobin is B1.2’s example of a protein with quaternary structure and a non-protein part, a conjugated protein.

Watch out

  • “Each red cell carries one oxygen.” Each is packed with hundreds of millions of haemoglobin molecules, each carrying up to four.
  • “Haemoglobin is in the plasma.” It is inside the red cells.
  • “Carbon dioxide takes oxygen’s place on the haem.” It binds elsewhere.
  • “Oxygen is carried dissolved in the blood.” Only about 2 per cent is.

Oxygen dissolves poorly in water, so the plasma could carry only a small fraction of what an active mammal needs. Almost all of it travels bound to haemoglobin, which packs every red blood cell. A haemoglobin molecule is four polypeptide chains held together, each folded round a haem group with an iron ion at its centre, and each iron binds one oxygen molecule. So one haemoglobin carries up to four. It is B1.2’s example of a protein with quaternary structure and a non-protein part, a conjugated protein. In the lungs it loads oxygen; in the tissues it unloads it.

A haemoglobin has four haem groups. What does the first oxygen to bind do to how easily the others bind?

That is cooperative binding. It runs in reverse too: once one oxygen leaves, the others leave more easily. So haemoglobin loads fully where there is plenty of oxygen and lets most of it go where oxygen is short, which is the S-shaped curve of chapter 14.

Carbon dioxide also binds to haemoglobin, but not at the haem: it binds at other sites, on the chains themselves. Binding at a site other than the one a molecule works at is called allosteric binding, “another site”. It changes the shape so that the haem groups hold oxygen less tightly. Hydrogen ions, which carbon dioxide makes in the blood (chapter 16), bind at other sites too, and do more of this than the carbon dioxide itself.

Watch out “Each red cell carries one oxygen.” Each is packed with hundreds of millions of haemoglobin molecules, each carrying up to four. “Haemoglobin is in the plasma.” It is inside the red cells. “Carbon dioxide takes oxygen’s place on the haem.” It binds elsewhere. And “oxygen is carried dissolved in the blood.” Only about 2 per cent is.
One haemoglobin, drawn flatalpha chainbeta chainbeta chainalpha chaincarbon dioxideat another sitehaem groupiron ionoxygen, boundup to four a molecule

Tap a part of the haemoglobin.

One haemoglobin, much enlarged, taking up oxygen one molecule at a time. Watch how readily each one binds, then change the oxygen around it, and set Carbon dioxide to High.

B3.1.13 Oxygen dissociation curves as a means of representing the affinity of haemoglobin for oxygen at different oxygen concentrations

The S-shaped curve

  • An oxygen dissociation curve plots saturation, the percentage of haem groups carrying oxygen, against the partial pressure of oxygen, pO2, in kPa.
  • The flat top, loading in the lungs: at the lungs’ pO2 haemoglobin is nearly saturated, and a small fall in the lungs’ oxygen costs it very little.
  • The steep middle, unloading in the tissues: where pO2 is low, a small fall makes haemoglobin let go of a lot more oxygen, so a tissue that uses more gets more.
  • Affinity is how tightly haemoglobin holds oxygen. A curve further left has a higher affinity; further right, a lower one.
  • Cooperative binding makes the curve an S, not a straight line.

The detail

  • pO2 is how much oxygen there is. In the alveoli it is about 13 kPa; in a resting tissue the blood leaves at about 5 kPa; in a hard-working muscle it can fall to 2 or 3.
  • A small fall in the lungs’ oxygen happens high up a mountain, or in a stuffy room.
  • A curve further to the left holds more oxygen at the same pO2. A curve further to the right holds less and gives more away.
  • The oxygen given up between two places is the saturation at one minus the saturation at the other.

Try it

  • Find the oxygen given up in the tool, for the lungs and a resting tissue.

Watch out

  • “The y-axis is the amount of oxygen in the blood.” It is the percentage of haemoglobin saturated.
  • “A curve to the right means a higher affinity.” Lower.
  • “The curve is a straight line.” Cooperative binding makes it an S.
  • “Haemoglobin is fully saturated in the lungs.” Close, at about 97 per cent, but not quite.

How much oxygen haemoglobin holds depends on how much oxygen is around it. An oxygen dissociation curve shows it. Up the side is the saturation: the percentage of the haem groups carrying oxygen. Along the bottom is the partial pressure of oxygen, pO2, in kilopascals (kPa): how much oxygen there is. In the alveoli pO2 is about 13 kPa; in a resting tissue the blood leaves at about 5 kPa; in a hard-working muscle it can fall to 2 or 3.

The curve is shallow at low pO2, steep in the middle and flat at the top. What makes the middle so steep?

Read the shape for what it does:

  • The flat top: loading in the lungs. At the lungs’ pO2, haemoglobin is nearly saturated, and the flat top means a small fall in the lungs’ oxygen (high up a mountain, or in a stuffy room) costs it very little.
  • The steep middle: unloading in the tissues. Where pO2 is low, a small fall makes haemoglobin let go of a lot more oxygen, so a tissue that uses more oxygen gets more.
  • Affinity. How tightly haemoglobin holds oxygen. A curve further to the left holds more oxygen at the same pO2: a higher affinity. A curve further to the right holds less and gives more away: a lower affinity.

The oxygen given up between two places is the saturation at one minus the saturation at the other. Find it in the tool for the lungs and a resting tissue.

Remember it Which way the curve moves

  • LeftLoadshigher affinity: holds oxygen tighter
  • RightReleaseslower affinity: gives oxygen up
Watch out “The y-axis is the amount of oxygen in the blood.” It is the percentage of haemoglobin saturated. “A curve to the right means a higher affinity.” Lower. “The curve is a straight line.” Cooperative binding makes it an S. And “haemoglobin is fully saturated in the lungs.” Close, at about 97 per cent, but not quite.
024810160204060saturation with oxygen / %partial pressure of oxygen, pO₂ / kPa6121480100resting tissuelungsadultabout 22 %given up75975.313.3
  1. Four measurements of blood at different partial pressures of oxygen (pO2), plotted as the percentage of its haemoglobin carrying oxygen: its saturation.
  2. The curve through them is S-shaped: shallow at the lowest pO2, steep in the middle, flat at the top. This is the oxygen dissociation curve of adult haemoglobin.
  3. Read it: blood leaving the lungs (13.3 kPa) is about 97 % saturated; blood leaving resting tissue (5.3 kPa) about 75 %. About 22 % of the haemoglobin gave up its oxygen there.
Plot four points and watch the S draw, then move the marker to read the saturation at the lungs and at a resting tissue, and the oxygen given up between them.

B3.1.11 Adaptations of foetal and adult haemoglobin for the transport of oxygen

Foetal against adult

  • A foetus gets its oxygen from its mother’s blood in the placenta, where the pO2 is low.
  • Foetal haemoglobin has two of the same alpha chains as an adult’s, but two gamma chains in place of the adult’s beta chains.
  • Its dissociation curve lies to the left of the adult’s, so at every pO2 in the placenta it is more saturated and takes up oxygen from the mother’s.
  • After birth, over the first months, the baby’s red cells come to be filled with adult haemoglobin instead.

The detail

  • A foetus cannot breathe.
  • In the placenta the mother’s blood and the foetus’s blood run close together, separated by a thin barrier, and never mix.
  • Oxygen leaves the mother’s haemoglobin, diffuses across, and has to be taken up by the foetus’s.
  • The mother’s blood in the placenta has already lost some of its oxygen, which is why the pO2 there is low.
  • After birth, the baby breathes for itself.

Try it

  • Discuss: why must the foetal curve lie to the left of the adult’s? Read both curves in the tool at the placenta’s pO2.
  • Then read the foetal curve at a foetal tissue’s pO2, which is lower still: does foetal haemoglobin still give up oxygen there?

Links across the course

  • The placenta itself is D3.1’s.

Watch out

  • “The foetus’s blood is its mother’s.” The two never mix: only substances cross the barrier.
  • “The foetus breathes through the placenta.” Its lungs are full of fluid and exchange no gas until birth; the placenta does it.
  • “Foetal haemoglobin carries more oxygen when full.” Full, both carry four oxygen molecules; the foetal one holds them more tightly.

A foetus cannot breathe: it gets its oxygen from its mother’s blood, in the placenta. There the mother’s blood and the foetus’s blood run close together, separated by a thin barrier, and never mix. Oxygen leaves the mother’s haemoglobin, diffuses across, and has to be taken up by the foetus’s. But the mother’s blood in the placenta has already lost some of its oxygen, so the pO2 there is low.

In the placenta the mother’s blood and the foetus’s blood are both at low oxygen levels. For oxygen to pass to the foetus, what must be true of foetal haemoglobin?

Foetal haemoglobin is built from different chains: two of the same alpha chains as an adult’s, but two gamma chains in place of the adult’s beta chains. Its dissociation curve lies to the left of the adult’s, so at every pO2 in the placenta it is more saturated. After birth, the baby breathes for itself, and over the first months its red cells come to be filled with adult haemoglobin instead. The placenta itself is D3.1’s.

Discuss Why must the foetal curve lie to the left of the adult’s? Read both curves in the tool at the placenta’s pO2. Then read the foetal curve at a foetal tissue’s pO2, which is lower still: does foetal haemoglobin still give up oxygen there?

Watch out “The foetus’s blood is its mother’s.” The two never mix: only substances cross the barrier. “The foetus breathes through the placenta.” Its lungs are full of fluid and exchange no gas until birth; the placenta does it. And “foetal haemoglobin carries more oxygen when full.” Full, both carry four oxygen molecules; the foetal one holds them more tightly.
MOTHER’S BLOODFOETUS’S BLOOD, IN A CAPILLARYa thin barrierthe two bloods never mixoxygen is low on both sidesthe mother’s haemoglobingives up oxygenthe foetus’s haemoglobin takes it upoxygen-rich blood leaves for the foetusoxygen crosses the barrier
  1. In the placenta the mother’s blood flows past a thin barrier, and the foetus’s blood flows in capillaries beneath it. The two never mix. On both sides the oxygen is low.
  2. The mother’s haemoglobin, at this low pO2, gives up some of its oxygen, which diffuses towards the barrier.
  3. The oxygen crosses, and the foetus’s haemoglobin takes it up at the low pO2 there: it holds oxygen more tightly than the mother’s. Its red cells leave oxygen-rich, for the foetus.
02681012141602040100saturation with oxygen / %partial pressure of oxygen, pO₂ / kPa46080In the placentamother’s bloodabout 6.7 kPafoetus’s bloodleaves at about 4.0 kPaoxygen-richoxygen-poor, dottedadultfoetaladult78594.0
  1. In the placenta the mother's blood and the foetus's blood come close but never mix. The mother's is at about 6.7 kPa there; the foetus's leaves at only about 4.0 kPa.
  2. Foetal haemoglobin's curve lies to the left of the adult curve: at the same pO2 it is more saturated. It has a higher affinity for oxygen.
  3. At 4.0 kPa adult haemoglobin is about 59 % saturated and foetal haemoglobin about 78 %: oxygen the mother's haemoglobin lets go is taken up by the foetus's.
The foetal and the adult curve together. Read both at the placenta’s pO2 and see which way oxygen goes.

B3.1.12 Bohr shift

More carbon dioxide, more oxygen delivered

  • A hard-working muscle makes a lot of carbon dioxide. In the red cells carbonic anhydrase combines it with water to make carbonic acid, which splits into hydrogen ions and hydrogen carbonate ions.
  • More carbon dioxide, more hydrogen ions, lower affinity: the curve moves to the right and more oxygen is released. That is the Bohr shift.
  • The benefit: oxygen is delivered where respiration is fastest, without the pO2 having to fall further.
  • In the lungs carbon dioxide diffuses out into the alveoli, the curve moves back to the left, and haemoglobin loads oxygen easily again.

The detail

  • The carbon dioxide diffuses into the blood and into the red cells, and the blood becomes a little more acidic.
  • The harder a muscle works, the more carbon dioxide it makes, and the more oxygen the blood passing through it gives up.

Carrying carbon dioxide back

  • Carbon dioxide travels back to the lungs three ways: most of it, about 70 per cent, as hydrogen carbonate ions in the plasma.
  • About a fifth travels bound to haemoglobin, and the rest, under a tenth, dissolved.

In the exam

  • Exam practice: explain, with an annotated sketch of the dissociation curve, how exercise changes haemoglobin’s affinity for oxygen, and why this helps the muscles (6 marks).
  • Sketch the shifted curve in the tool below first.

Watch out

  • “The curve moves right, so haemoglobin takes up more oxygen.” It gives more up.
  • “The Bohr shift happens in the lungs.” It matters most in respiring tissue; in the lungs it is undone.
  • “Carbon dioxide takes the place of oxygen on the haem.” It binds elsewhere.
  • “The acid damages the haemoglobin.” The change in pH is small and the shape change reverses in the lungs.

A muscle that works hard respires fast, so it makes a lot of carbon dioxide. That carbon dioxide diffuses into the blood and into the red cells. There an enzyme, carbonic anhydrase, combines it with water to make carbonic acid, which splits into hydrogen ions and hydrogen carbonate ions. The blood becomes a little more acidic.

A muscle is working hard and its carbon dioxide is high. At the same pO2, what does this do to the haemoglobin passing through?

That move of the curve to the right is the Bohr shift. It does exactly what a working tissue needs: the harder a muscle works, the more carbon dioxide it makes, and the more oxygen the blood passing through it gives up. In the lungs the reverse happens. Carbon dioxide diffuses out into the alveoli, the curve moves back to the left, and haemoglobin loads oxygen easily again.

  • More carbon dioxide, more hydrogen ions, lower affinity, more oxygen released.
  • The benefit: oxygen is delivered where respiration is fastest, without the pO2 having to fall further.
  • In the lungs the carbon dioxide leaves, and loading is easy again.
Go further Carbon dioxide travels back to the lungs three ways: most of it, about 70 per cent, as hydrogen carbonate ions in the plasma; about a fifth bound to haemoglobin; and the rest, under a tenth, dissolved.
Exam practice Explain, with an annotated sketch of the dissociation curve, how exercise changes haemoglobin’s affinity for oxygen, and why this helps the muscles (6 marks). Sketch the shifted curve in the tool below first.
Watch out “The curve moves right, so haemoglobin takes up more oxygen.” It gives more up. “The Bohr shift happens in the lungs.” It matters most in respiring tissue; in the lungs it is undone. “Carbon dioxide takes the place of oxygen on the haem.” It binds elsewhere. And “the acid damages the haemoglobin.” The change in pH is small and the shape change reverses in the lungs.
Haemoglobin unloads where it is neededAIRto the bodyback to the lungslung capillarypO2 13 kPa, CO2 lowworking musclepO2 2.5 kPa, CO2 highH+H+H+H+ONE HAEMOGLOBINholds on to four oxygenits affinity for oxygen is highcarbon dioxide and H+ bindat their own sites, not on the haemgrip loosenedthe first oxygen goesthe Bohr shiftmore oxygen released thanat that pO2 alone
  1. A red cell in a lung capillary. Oxygen is high and carbon dioxide low, so its haemoglobin loads fully: each molecule carries four oxygen.
  2. It leaves the lung oxygen-rich and is carried out to the body.
  3. In a working muscle the pO2 is low and the muscle’s respiration has made a lot of carbon dioxide, which diffuses into the blood and the cell.
  4. Carbon dioxide, and the hydrogen ions made from it in the cell, bind to the haemoglobin at their own sites. Its grip on oxygen loosens: its affinity falls, and the first oxygen goes.
  5. So it releases more oxygen than it would at that pO2 alone, into the muscle that needs it most: the Bohr shift. The cell goes back to the lungs oxygen-poor, where the carbon dioxide leaves and it loads again.
0468101214160406080100saturation with oxygen / %partial pressure of oxygen, pO₂ / kPa220working muscleresting musclelungspCO₂ 5.3 kPapCO₂ 8.5 kPa29192.5
  1. Adult haemoglobin with the carbon dioxide of blood in the lungs (pCO2 5.3 kPa).
  2. With the carbon dioxide of blood in working muscle (pCO2 about 8.5 kPa) the curve moves to the right: a lower affinity for oxygen. This is the Bohr shift.
  3. At working muscle's pO2 (2.5 kPa) the shifted curve is about 19 % saturated against 29 % without the shift: more oxygen is given up where the muscle needs it.
Raise the carbon dioxide and watch the curve move. Compare the oxygen given up at a resting and a working muscle, then sketch the shifted curve yourself.
Follow one red cell from a lung capillary to a muscle and back. Set the muscle to Working and count the oxygen it gives up.
Putting it together

What are the similarities and differences in gas exchange between a flowering plant and a mammal? Both exchange gases by diffusion across a large, thin, moist surface: the wet walls of the mesophyll cells in a leaf (chapter 2), the alveoli in a lung (chapter 9). Both keep the gradient steep. But a leaf brings the air to its cells through its stomata and air spaces and needs no pump, while a mammal pumps air in and out (chapters 10 and 11) and carries the gases on in its blood (chapter 7), bound to haemoglobin (chapters 13 to 16).

What is the relationship between gas exchange and metabolic processes in cells? Respiration in every cell makes the carbon dioxide the lungs must clear and uses the oxygen they take in; a leaf in the light also uses carbon dioxide for photosynthesis (chapter 4); and the Bohr shift sends the most oxygen to the cells that respire fastest (chapter 16).

How do multicellular organisms solve the problem of access to materials for all their cells? Each brings the outside close to every cell: a leaf through its air spaces, a mammal through its branching airways and the blood that carries what the alveoli take in (B3.2).

Leaf and lung, side by side. Tap a box and choose; a right answer stays, with its reason.

 LeafMammal: lungs
The exchange surface
The wet walls of the mesophyll cellsInside the leaf, round the air spaces (chapter 2).
The walls of the alveoliOne flat cell thick, wrapped in capillaries (chapter 9).
How the air reaches it
Through stomata and air spacesThe pores open into a maze of air spaces.
Down the trachea, bronchi and bronchiolesA branching tree of airways (chapter 8).
What moves the air
Diffusion alone: there is no pumpGases diffuse in and out of the open stomata.
Muscles that change the chest’s volumeThe diaphragm and intercostal muscles (chapter 10).
How the gradient is kept
The cells use or make the gasesPhotosynthesis uses carbon dioxide in the light.
Ventilation and blood flowFresh air on one side, moving blood on the other (chapter 7).
Where the gas goes next
Straight into the cells round the air spacesNo transport system is needed for the gases.
Into the blood, which carries it roundThe blood takes oxygen to every cell (B3.2).
The price
Water vapour lost through the stomataTranspiration (chapter 6).
Water vapour lost in every breath outThe alveoli are moist, so breath out is humid.
How it is controlled
Guard cells open and close the stomataThey close in the dark and in drought (chapter 4).
The breathing rate and depth changeFaster and deeper with exercise (chapter 11).
What carries oxygen
Nothing: it diffuses through the air spacesA leaf’s cells are never far from an air space.
Haemoglobin, in the red cellsUp to four oxygen molecules on each (chapter 13).
Gas exchange in a leaf and in a mammal’s lungs. Tap a box and choose: a right answer stays, with its reason.

02Dry lab: The potometer

A leafy shoot sealed into a tube of water takes up water as its leaves lose it, and an air bubble creeps along the scale. Change the light, the wind, the humidity or the temperature, read the bubble every minute, then plan and write it up as an investigation with the coach beside you.

050100150200250mmair bubble0:0020 °C50 %LAMP 20 CMFAN OFF050100150200250mmbubble at 5 min5:0020 °C50 %LAMP 20 CMFAN OFF
  1. The potometer set up: a leafy shoot sealed into a tube of water, the air bubble near the start of the scale and the stopwatch at 0.
  2. Five minutes on: the bubble has moved along the scale as the shoot took up water. The dashed outline is where it started; a reading every minute goes in the table.
Run it on the page: set it up, press Start, read the bubble each minute, and the table and graph fill in.

IA coach

Write it up as an investigation

Your results from this dry lab can be written up the way an IB scientific investigation is: four criteria, each worth 6 marks. Tick each line as your write-up does it. The coach on the page checks these as you go; it never gives a mark.

1 Research design

A focused question set in its biology; your choices of what to measure, how, over what range and how often, explained rather than listed; what you kept the same and how; safety, ethics and the environment; a method someone else could follow and repeat.

  • My question names what I changed.
  • It gives the range I used, with units.
  • It names what I measured and how.
  • It names the organism or system.
  • My background explains, with the biology, why the two should be linked.
  • I cite my sources, and each reference can be traced.
  • If I give a hypothesis, it predicts and explains.
  • Every variable has its How, Why and Units.
  • For each thing kept the same, I say how I kept it so.
  • I list at least three things I kept the same.
  • I name the apparatus that set what I changed, and the instrument that measured.
  • I test enough values.
  • My values spread wide enough.
  • I run at least three trials at every value.
  • I run a control.
  • I explain why these values, this many and this often.
  • Someone else could repeat my method.
  • I deal with safety, ethics and the environment.

2 Data analysis

Raw data recorded clearly, with titles, units, uncertainties and the same decimal places down a column; what you saw as well as what you measured; processing that suits the question, shown with a worked example; the spread shown; a graph a reader can trust.

  • Each table has a numbered title that says what it shows.
  • Every heading has its quantity and its unit.
  • Every raw data heading has its uncertainty.
  • Each uncertainty is realistic for the instrument.
  • Each uncertainty has the same decimal places as its readings.
  • I record what I saw as well as what I measured.
  • I show one worked example of my processing, and it is right.
  • I say why I left out any trial.
  • My error bars show a spread my repeats can support.
  • My graph has a numbered title and labelled axes with units.
  • I say what the error bars show.
  • A straight line, if I draw one, has its R².
  • A statistical test, if I run one, has its hypotheses and suits the data.

3 Conclusion

Your question answered from the processed data, with numbers quoted and the spread taken into account; the biology that explains the pattern; a comparison with published work; no claim bigger than the data.

  • I answer my question in a sentence, naming both variables.
  • I quote my processed numbers.
  • I say how sure the spread lets me be.
  • I say whether my hypothesis is supported.
  • I explain the pattern with biology.
  • I compare my result with published work, and cite it.
  • I claim no more than my data show.

4 Evaluation

Weaknesses and limitations of this method (not slips in carrying it out), with evidence from your own data, the effect each had on the results, which mattered most and why, and a realistic improvement for each.

  • I give at least three weaknesses or limitations.
  • Every row is filled in.
  • No slips in carrying it out: weaknesses of the method itself.
  • Each improvement is specific: which instrument, how many, what changes.
  • Each effect says what it did to my data.
  • At least two rows point to evidence in my own data.
  • At least one limitation: what this experiment cannot tell me.
  • I say which mattered most, and why.
  • I deal with what stands out in my data.
  • My improvements improve this investigation, not a new one.

Variables

VariableHow?Why?Units
Independent: distance from the lamp
Dependent: rate of water uptake
Kept the same: air movement (the fan)
Kept the same: humidity of the air
Kept the same: temperature of the air
Kept the same: heat shield between the lamp and the shoot
Kept the same: no bag over the shoot
Kept the same: the same shoot, and its leaf area
Kept the same: capillary bore
Kept the same: time left to settle before reading
Kept the same: length of the run

Evaluation

Weakness or limitationWhich?Evidence in my dataEffect on my resultsImprovement

Data generated with the potometer dry lab, biologybybradford.com (a simulation). These checks catch what is missing. They cannot judge how good it is: that is what your teacher does.

Your questionHow does one condition change how fast a leafy shoot takes up water, and so how fast it transpires? The bench starts with light: how does the rate change as the lamp comes from 80 cm to 10 cm?
What you can changeOne independent variable at a time: the lamp's distance (10 to 80 cm), the fan (off, low or high), the humidity of the air (30 to 90 %) or its temperature (15 to 30 °C). Keep everything else the same unless you mean to change it: the heat shield, the bag, the capillary's bore and how long you wait before you read. Give the shoot time to settle after every change.
What to recordThe bubble's position on the scale every minute, then the rate as a volume of water a minute, and per cm² of leaf. At least three runs at each value, a mean and a standard deviation, and a graph of the means with error bars. A potometer measures water uptake, not water loss. A little of the water a shoot takes up stays in it, so uptake is a little more than transpiration, though close enough to stand in for it.

Find out

  • How much does light matter? The lamp at five or more distances between 80 cm and 10 cm, three runs at each, with the heat shield in place. Wait for the rate to settle after every move before you read.
  • Does moving air speed it up? The fan off, low and high, three runs at each, with the lamp and the room kept the same.
  • Humid air or dry? The air from 30 to 90 % humidity. Then, at the room’s own humidity, tie a clear bag over the leaves and read the bubble every minute.
  • Is a warmer room faster? The air from 15 to 30 °C, at the same humidity.
  • Run the controls. A potometer with no shoot in it, its bung sealed, whatever you change; for light, the shoot in a light-proof box with the lamp off as well.

Record

  • For every run: the variable you changed, its value, and the settings you kept the same.
  • The bubble’s position on the scale each minute. How far it moves ÷ the time is its rate in mm min⁻¹.
  • Turn that into a volume: the distance × the bore’s cross-section, πr², which is 0.785 mm² for a 1.0 mm bore. A bubble moving 24 mm a minute along it means 24 × 0.785 ≈ 19 mm³ of water a minute.
  • Divide by the leaf area, traced on 1 cm squared paper, for the rate per cm² of leaf.
  • Three or more runs at each value, with a mean and its standard deviation. The table and the graph fill in as you record, or download the CSV and plot your own. When you are done, the IA coach below the dry lab helps you write it up as an investigation.

A lamp warms whatever it shines on. Why does the bench keep a heat shield, a glass tank of water, between the lamp and the shoot?

With the fan on low, the shoot takes up water much faster than in still air. What do you expect the high setting to add?

Why run a potometer with no shoot in it, its bung sealed, alongside the real ones?

Back to the leaf

Transpiration is a consequence of gas exchange in a leaf. Use your results to explain why the shoot took up water faster as the lamp came closer.

03Check

A fresh paper from the exam bank on this guide's topics each time: past-paper style questions, marked as you go, and saved to your Exam practice progress when you are signed in. It opens on biologybybradford.com, so it needs the internet.

Exam practice

Exam questions on B3.1, marked

Start 15 marks of exam questionsYour exam practice

04Downloads

This file is the guide, saved to run without the internet.

Saved from biologybybradford.com/guides/ib-biology-b3-1-gas-exchange, where the guide is kept up to date with the notes, the revision sheet and, for the teacher, the lesson plans and slides.

05Teacher resources

The guide as six one-hour lessons, and one more at higher level. Each has a plan to print (the timings, what to project and where to stop, the activities with what they need, what students get wrong) and slides to teach it from, in the same order, with the teacher's moves in the notes.

LessonCoversFocusChaptersLesson planSlides
1Why leaves are flat B3.1.1, B3.1.2, B3.1.7, B3.1.860 min Why gas exchange gets harder as organisms grow, what makes a good exchange surface, and how a leaf is built for gas exchange and drawn in plan 1, 2, 3 Lesson planPDF 682 KB SlidesPPTX 1.5 MB
2Doors in the leaf B3.1.7, B3.1.1060 min How guard cells open and close a stoma, and finding stomatal density from leaf casts with repeated counts 3, 4, 5 Teacher pass: Lesson planPDF 667 KB Teacher pass: SlidesPPTX 2.2 MB
3The price of gas exchange B3.1.960 min Transpiration as the price of gas exchange, the factors that change its rate, and measuring it with a potometer 6, dry lab Teacher pass: Lesson planPDF 590 KB Teacher pass: SlidesPPTX 685 KB
4Gas exchange in the lungs B3.1.3, B3.1.460 min How the lungs keep the concentration gradients steep, how the airways reach every alveolus, and how an alveolus and its capillary are built for gas exchange 1, 7, 8, 9 Teacher pass: Lesson planPDF 734 KB Teacher pass: SlidesPPTX 5.4 MB
5Ventilation B3.1.560 min How the diaphragm and the intercostal muscles change the volume and so the pressure in the chest, at rest and in forced breathing, and what a model lung shows and leaves out 10, 11 Teacher pass: Lesson planPDF 657 KB Teacher pass: SlidesPPTX 4.8 MB
6Measuring lung volumes B3.1.660 min What a spirometer measures, how to read tidal volume, the reserve volumes and vital capacity from a trace, and how to make the measurements reliable 12 Teacher pass: Lesson planPDF 604 KB Teacher pass: SlidesPPTX 634 KB
7Carrying oxygen HL B3.1.11, B3.1.12, B3.1.1360 min How haemoglobin binds oxygen cooperatively, how to read an oxygen dissociation curve, why foetal haemoglobin's curve lies to the left, and how the Bohr shift delivers more oxygen to working tissue 13, 14, 15, 16 Teacher pass: Lesson planPDF 740 KB Teacher pass: SlidesPPTX 4.2 MB

Lesson 1 is free with a free account. The other plans and slides, for every guide, come with the Teacher pass.

The note template, the revision sheet and the offline copy are in Downloads, for you and the class.

PRACTISE AND REVISE

Make it for your class, or set it

Build for your class

Already on the site for B3.1

Card sets on splycr

Open a set to host it as a class game, or make a copy to edit.

How this was made. The course structure, the activities and the teaching choices come from my own classroom, my presentations and my years of teaching IB and AP Biology. I use Claude, an AI, to help write and build the interactive guides, lesson plans, slides and practice questions, and to draw the diagrams and code the interactives. I direct the work and review it against the IB and AP specifications before it goes live. Sources and acknowledgements.