Biology  by Bradford
support
AP BIOLOGY · UNIT 8 · ECOLOGY

How many, why not more, and who with?

A few yeast cells in sugar become millions, then stop. Work out why with three equations from the formula sheet, grow the population yourself, then put it in a community: hunters and hunted, rivals that divide a habitat, partners that cannot live apart. End by putting a number on how diverse a community is.

AP Biology 8.3 to 8.56 lessons11 chaptersdry lab

Start learningRun the dry labTeach it

Fly over a woodland edge to one interaction after another, each scored + or − for the two species, then dive down a bean root into a nodule full of Rhizobium. Every species here is an example to reason with, not one to memorize.
NavigationBy the end you cantap a goal to go to its chapter

01Learn

Eleven chapters and a dry lab, in two halves. Populations: what a population is (chapter 1), births and deaths (2), growth with no limits (3), what limits it (4) and the logistic model (5). Communities: a community and its interactions (6), predators and prey (7), competition and niche partitioning (8), trophic cascades and cooperation (9), symbioses (10) and measuring diversity (11). All four equations are on the AP formula sheet: the exam asks you to use them, not to recall them. Every species named is an example to reason with, not one to memorize. Make each prediction before you open the answer or run a bench.

NavigationChapterstap a chapter to jump to it
  1. 1One species, one place, one count
  2. 2Births in, deaths out: dN/dt = B − D
  3. 3Nothing in the way: dN/dt = rmaxN
  4. 4What stops it
  5. 5Room left to grow: (K − N)/K
  6. 6Who gains, who loses
  7. 7Each drives the other's numbers
  8. 8Same food, same place: one loses, or they divide it
  9. 9A change at the top runs down the chain
  10. 10Living together
  11. 11More than a count of species

8.3.A What a population is

One species, one place, one count

  • A population is the individual organisms of one species in one area, which interact with one another and with their environment.
  • Its size is written N: the number of individuals.
  • Many of a species' adaptations are ways of obtaining and using energy and matter where it lives.
  • Those adaptations help set how fast the species can reproduce and how long its individuals live, and so how its population grows.

The detail

  • Individuals of one population can meet, compete, mate and pass on genes. A barrier they cannot cross, such as a busy highway, splits a species into separate populations.
  • The interactions are with each other (competing for food or mates, cooperating) and with the environment (water, temperature, food, shelter).
  • A mouse that breeds at six weeks old and a whale that breeds at ten years old have very different populations, because they get and spend energy in very different ways.

Where this guide goes

  • Chapters 1 to 5: populations. How they change, how fast, and what stops them.
  • Chapters 6 to 11: communities. The populations of different species that live together, and how they shape each other.

Count every common frog around one pond in spring and you have counted a population: the individuals of one species in one area, at one time. They interact with each other, competing for insects, gathering to mate and laying their spawn side by side, and they interact with the pond, the weather and the plants around it. Ecologists write the size of a population as N, the number of individuals in it.

Where one population ends and the next begins depends on whether the individuals can actually meet. The figure shows frogs of one species in two settings. Make your prediction before you switch to the second.

Frogs at one pond, and frogs of the same species at another pond 40 km away across a busy highway. One population or two?

Why should one population grow fast and another slowly? Much of the answer is energy. Many of a species' adaptations are ways of getting and using energy and matter where it lives: what it eats and how it catches it, how it keeps warm, how much it spends on each offspring. A field mouse that breeds at six weeks and has litter after litter puts its energy into numbers. An elephant that breeds at about 14 years and has one calf every four or five years puts it into a few large, long-lived young. Those choices, shaped by selection, set the two things that change any population: how many are born and how many die.

  • A population: one species, one area, individuals that interact with each other and with the environment.
  • N is the number of individuals.
  • Adaptations for getting and using energy and matter set how fast a species breeds and how long it lives.
Watch out A population is not a whole species. One species is usually many populations, each in its own place, each with its own N.
♥♥one population: any two can meet and breedtwo populations: the road keeps them apart

8.3.A Birth rate, death rate and population size

Births in, deaths out: dN/dt = B − D

  • A population's growth depends on its birth rate, its death rate and its size.
  • The population growth equation: dN/dt = B − D. dN/dt is the change in N per unit time; B is the birth rate and D the death rate, each a number of individuals per unit time.
  • dN/dt above zero: the population grows. Below zero: it shrinks. Zero: it holds steady.
  • Dividing by N gives a per capita rate, per individual, which lets populations of different sizes be compared.

Worked example

  • A pond of 800 frogs: 240 are born and 180 die in a year. dN/dt = 240 − 180 = 60 frogs per year.
  • Per capita: 60 ÷ 800 = 0.075 per frog per year.
  • A second pond: 150 born, 210 die. dN/dt = 150 − 210 = −60 frogs per year: shrinking.

The detail

  • The equation counts only births and deaths. It leaves out individuals arriving from elsewhere or leaving, so it describes a closed population, such as frogs at a pond far from any other.
  • The equation is on the AP formula sheet, with B, D, N and dt named. You need to use it, not recall it.

Watch out

  • dN/dt is the population's growth rate, in individuals per unit time. It is not a per capita rate until you divide it by N.

A closed population, one that nothing joins and nothing leaves, changes in only two ways: individuals are born into it and individuals die. Over a year, the change in N is the births minus the deaths. The AP formula sheet writes that as the population growth equation:

dN/dt = B − DdN/dt, the change in population size per change in time; B, the birth rate; D, the death rate

B and D here are numbers of individuals per unit of time: frogs born per year, frogs dying per year. Try one before reading on.

A herd of 400 has 60 births and 60 deaths this year. What is dN/dt, and is the herd growing?

Take a pond of 800 frogs in which 240 are born and 180 die in a year. dN/dt = 240 − 180 = 60 frogs per year: the pond gains 60. In a second pond 150 are born and 210 die, so dN/dt = 150 − 210 = −60 frogs per year, and that population is shrinking. A positive dN/dt means growth, a negative one decline, and zero a population holding steady.

A gain of 60 means something different in a pond of 80 and a pond of 8,000. Dividing by N gives a per capita rate, per individual: in the first pond, 60 ÷ 800 = 0.075 per frog per year. Use the counter in the figure on three ponds, work out dN/dt and the per capita rate for each, and then compare your answers.

  • dN/dt = B − D: births minus deaths, in individuals per unit time.
  • Positive, the population grows; negative, it shrinks; zero, it holds steady.
  • Per capita means divided by N.
Watch out dN/dt = B − D is the population's growth rate. Some books call it a per capita rate; it is only per capita once it is divided by N.
DECN at the start800B, birth rate (frogs per year)240D, death rate (frogs per year)180N at the end860each frog drawn stands for 10 frogs

Choose a pond, then run its year.

Choose a pond and run its year. Births tick the count up, deaths tick it down, and the year's totals stay on screen. Work out dN/dt and the per capita rate yourself, then check.

8.3.A Exponential growth

Nothing in the way: dN/dt = rmaxN

  • Reproduction without constraints results in exponential growth.
  • The exponential growth equation: dN/dt = rmaxN, where rmax is the maximum per capita growth rate of the population.
  • rmax stays the same, but the more individuals there are, the faster N rises: a J-shaped curve.
  • It happens when a few individuals have plentiful resources, and it cannot last.

Worked example

  • rmax = 0.5 per year. N = 1,200: dN/dt = 0.5 × 1,200 = 600 per year.
  • N = 2,400: dN/dt = 0.5 × 2,400 = 1,200 per year. N doubled, so the growth rate doubled; rmax did not change.
  • Doubling every generation from 1: 1, 2, 4, 8, 16, 32, 64; 1,024 after 10 generations; 1,048,576 after 20.

Stepping it a year at a time

  • N = 100, rmax = 0.5 per year: add 50 to give 150, then 75 to give 225, then 112.5 to give 337.5, then 168.75 to give 506.25.
  • This is an approximation: the equation gives the rate at one instant, and the rate rises all through the year.

Watch out

  • In exponential growth the per capita rate is constant. The population's growth rate is not: it keeps rising.

Suppose nothing limits a population: food, space and water to spare, no disease, nothing hunting it. Then each individual reproduces as fast as its species can, and the population grows at its maximum per capita growth rate, rmax. Multiply that by the number of individuals and you have the exponential growth equation from the formula sheet:

dN/dt = rmaxNrmax, the maximum per capita growth rate of the population; N, the population size

A population of 100 grows exponentially and adds 50 in its first year. When it has reached 200, about how many does it add in a year?

So with rmax = 0.5 per year, a population of 1,200 grows by 0.5 × 1,200 = 600 a year, and one of 2,400 by 1,200 a year. The rate per individual never changes; the population's rate keeps climbing, because every new individual reproduces too. Plot N against time and the curve is shaped like a J: slow at first, then steeper and steeper.

A bacterium that divides once a generation shows how fast that gets out of hand: 1, 2, 4, 8, 16, 32, 64, then 1,024 after 10 generations and over a million after 20. Plotted on a log scale, where each step up the axis is ten times the one below, that J becomes a straight line, which is the easiest way to spot exponential growth in data. Run the bench below with no limit on the sugar and switch between the two scales.

Exponential growth happens when a few individuals reach a place with plenty: a new island, a fresh flask of broth, a field after a fire. The figure is a real case. In 1944, 29 reindeer were put on St. Matthew Island in the Bering Sea, with no wolves and a thick carpet of lichen. Read the first two counts.

  • dN/dt = rmaxN: constant per capita rate, rising population growth rate.
  • A J curve on a normal scale; a straight line on a log scale.
  • It needs plentiful resources, so it never lasts.
Watch out "Exponential growth is growth at a constant rate" is wrong. The per capita rate, rmax, is constant; the number added each year keeps rising.
St. Matthew Island, Bering Sea01,0002,0003,0004,0005,0006,0007,0001940194519501955196019651970yearN (number of reindeer)291,350no counts in betweenlichen (winter food)not to scaleCounts: Klein, 1968.
St. Matthew Island: 29 reindeer released in 1944 and 1,350 counted in 1957 (Klein, 1968). The dashes join two counts; nobody counted in between. What shape is the growth so far?
rmax 0.5K nonesugar: lots0 htime--.-million /cm³dead50 µmFLASKCOUNTING CHAMBER040801201600612182430time (hours)N (million cells per cm³)N =dN/dt =
The bench with sugar to spare: no carrying capacity. Set rmax, run 30 hours, and switch the graph between a normal scale and a log scale.

8.4.A Carrying capacity; density-dependent and density-independent factors

What stops it

  • Carrying capacity, K, is the sustainable abundance of a species that the ecosystem's total available resources can support.
  • Density-dependent factors limit a population more strongly the denser it is: competition for food and space, predation, disease, the buildup of wastes.
  • Density-independent factors affect the same share of a population whatever its density: a flood, a fire, a drought.

The detail

  • The density of a population both affects its resources (more individuals use more) and is set by them (fewer resources support fewer individuals).
  • K is not fixed. It belongs to a species in a particular environment, and a drought, a new food source or damaged vegetation changes it.
  • A rate from data: St. Matthew Island's reindeer went from 1,350 in 1957 to about 6,000 in 1963, an average of (6,000 − 1,350) ÷ 6 = 775 reindeer per year.

Watch out

  • Density-independent does not mean harmless. It means the share killed does not depend on how crowded the population is.

No population grows exponentially for long. Sooner or later each individual gets less food, less space or less of something else it needs. The number of a species that an ecosystem's resources can support, and go on supporting, is its carrying capacity, K. K belongs to a species in a particular place, and it can change: a dry year lowers it and a new food source raises it.

On St. Matthew Island the reindeer had grown from 29 to 1,350 by 1957. By 1963 there were about 6,000, an average gain of (6,000 − 1,350) ÷ 6 = 775 a year. But they lived on lichen, which grows a few millimeters a year and does not recover quickly once grazed.

About 6,000 reindeer in 1963, on lichen that recovers slowly from grazing. What did the next count, in 1966, most likely find?

Step through the figure to the end. The reindeer overshot the island's carrying capacity: by 1963 they had eaten the lichen faster than it grew back, and in the very hard winter that followed most of them starved. Only 42 were alive in 1966. The food shortage and the severe winter did it together.

The things that limit a population come in two kinds. A density-dependent factor bites harder the more crowded the population is: in a dense population each individual has less food, a disease spreads faster from one to the next, predators find prey more easily and wastes build up. A density-independent factor hits the same share of a population however many there are: a flood drowns as large a share of a sparse population as of a crowded one.

A late frost kills 30% of the insects in a crowded field and 30% in a sparse one. Is the frost density-dependent or density-independent?

Now sort eight factors in the second figure. Each card, once placed, shows what it does to a dense and to a sparse population.

Remember it Density-dependent factors: Crowded People Dislike Waiting

  • CrowdedCompetitionless food and space each
  • PeoplePredationprey easier to find
  • DislikeDiseasespreads faster when close
  • WaitingWastesbuild up in a crowd
  • K: the number the ecosystem's resources can sustain. It can change.
  • Density-dependent: the share affected rises with density.
  • Density-independent: the same share at any density.
  • Overshoot K and a population can crash.
Watch out Carrying capacity belongs to the species and its environment together. The same island holds a different K for reindeer and for voles, and a different K for reindeer once the lichen is gone.
St. Matthew Island, Bering Sea01,0002,0003,0004,0005,0006,0007,0001940194519501955196019651970yearN (number of reindeer)291,350no counts in betweenabout 6,00042lichen (winter food)not to scaleCounts: Klein, 1968.
  1. 1944 and 1957: 29 reindeer released, then 1,350 counted. The lichen is thick.
  2. 1963: about 6,000 reindeer. The lichen is grazed far down. What happens next?
  3. 1966: 42 reindeer. Most died in the hard winter of 1963 to 1964, with little food left.
Counts from Klein (1968). The dashes join counts; nobody counted in the years between.
Density-dependentbites harder the denser the population
Density-independentthe same share at any density

0 of 8 right

Tap a card (or Tab to it and press Enter), then tap the bin it belongs in.

Eight things that limit a population. Tap a card, then the bin it belongs in. Each card, once placed, shows its effect on a dense and on a sparse population of voles: the voles it strikes are pink. The shares are invented, to show the pattern.

8.4.A Logistic growth

Room left to grow: (K − N)/K

  • As density-dependent and density-independent factors limit growth, a logistic growth model typically results.
  • The logistic growth equation: dN/dt = rmaxN (K − N)/K.
  • (K − N)/K is the share of the carrying capacity still free, and it shrinks as N rises toward K.
  • Plotted against time, logistic growth gives an S-shaped curve that levels off at K.

Worked example: K = 1,000, rmax = 0.4 per year

  • N = 100: 0.4 × 100 × (900 ÷ 1,000) = 40 × 0.9 = 36 per year.
  • N = 500: 0.4 × 500 × (500 ÷ 1,000) = 200 × 0.5 = 100 per year, the largest.
  • N = 900: 0.4 × 900 × (100 ÷ 1,000) = 360 × 0.1 = 36 per year.
  • N = 1,000: 0.4 × 1,000 × 0 = 0. N = 1,200: 480 × (−0.2) = −96 per year, so the population falls.

Finding rmax from data

  • A population of 400 with K = 2,000 adds 96 in a year. 96 = rmax × 400 × (1,600 ÷ 2,000) = rmax × 320, so rmax = 0.3 per year.

What the model leaves out

  • Real populations respond with a delay, so they often overshoot K and swing around it; and K itself changes from year to year.

The reindeer show what happens when nothing slows a population until it is too late. Most populations slow down as they grow, because the density-dependent factors of chapter 4 bite harder the closer N gets to K. The formula sheet's logistic growth equation builds that in:

dN/dt = rmaxN (K − N)/KK, the carrying capacity; the other symbols as in the exponential growth equation

It is the exponential equation multiplied by one bracket, (K − N)/K, which is the share of the carrying capacity still free. When the population is tiny the bracket is nearly 1 and growth is almost exponential. When N reaches K the bracket is 0 and growth stops. Before you work it through, predict.

For a population with K = 1,000, at which size is it adding individuals fastest?

K = 1,000 and rmax = 0.4 per year
N(K − N)/KrmaxNdN/dt (per year)
1000.94036
5000.5200100
9000.136036
1,00004000
1,200−0.2480−96

The same 36 a year at 100 and at 900 is worth noticing: at one end there are few breeders, at the other little room. Plotted against time, N climbs slowly, then steeply around K/2, then levels off at K: an S-shaped curve. At K the population has not stopped reproducing. Births go on; they are matched by deaths. The figure shows the same balance as a loop of negative feedback.

A population with K = 1,000 is moved to a new site with the same K, but starts there at 1,200. On a graph of N against time, what does the next stretch look like?

The logistic curve is a model, and real populations depart from it. They respond to crowding after a delay, so many overshoot K and swing around it, and K itself moves as the weather and the food change. The Dry lab lets you set rmax and K and read the equation beside the curve.

  • dN/dt = rmaxN (K − N)/K: an S-shaped curve.
  • Fastest growth at N = K/2; none at N = K; decline above K.
  • At K, births equal deaths.
Watch out "The population stops reproducing at K" is wrong. Individuals are still being born at K; exactly as many die.
Names your textbook uses beyond the 2025 course framework
  • Survivorship curves plot how many of a group born together are still alive at each age: Type I (most live to old age, as in humans), Type II (a steady chance of dying at any age), Type III (most die young, as in many fish).
  • Dispersion is how individuals are spaced: clumped, uniform or random.
  • r-selected and K-selected species: many small offspring with little care, against a few large offspring with much care.
  • Mark and recapture estimates the size of a population of animals that move around; the site has a mark and recapture bench to try it.

None of these is named in the 2025 course framework, so the exam does not ask you to know them. A question that uses one tells you what you need.

crowdedabove Kless food,more predators,more diseasefewer born,more dienumbers fallback to Knegative feedbackKabove Kbelow Knumber in the population, over the yearsroom to sparebelow Kmore food,fewer predators,less diseasemore born,fewer dienumbers riseup to Knegative feedbackKabove Kbelow Knumber in the population, over the years

8.5.B Communities and the interactions among their populations

Who gains, who loses

Barnacles ride on a whale's skin, gaining a lift to feeding grounds, and the whale is neither helped nor harmed. Which pair of signs is it?

  • A community is a group of interacting populations of different species in one place. It changes over time because of those interactions.
  • Interactions among populations determine how each gets energy and matter.
  • Each interaction can be described by its effect on each species: helped (+), harmed (−) or unaffected (0).
  • Competition (− / −), predation (+ / −), parasitism (+ / −), mutualism (+ / +), commensalism (+ / 0).

The detail

  • Herbivory, an animal eating a plant, scores + / − like predation; often the plant survives.
  • Parasitism, mutualism and commensalism are all symbioses: two species living in close, lasting contact (chapter 10).
  • Each interaction changes a birth rate or a death rate, so each can drive the size of a population (8.5.B.4).

Watch out

  • Competition harms both sides, the winner too: it gets less than it would alone.

The film at the top of the page is one place full of populations: oaks, grass, rabbits, foxes, squirrels, deer, ticks, frogs, beans and the bacteria in their roots. All the populations of different species living and interacting in one place make up a community. Each interaction is a way of getting energy and matter: one eats another, two need the same food, two trade what each makes.

The simplest way to describe an interaction is by what it does to each side. A species is helped (+), harmed (−) or unaffected (0). Five interactions are in the course: competition (− / −), predation (+ / −), parasitism (+ / −), mutualism (+ / +) and commensalism (+ / 0). Fill in the signs in the figure, then try one the figure does not have.

Herbivory, an animal eating a plant, scores like predation, + / −, though the plant often lives to grow again. The signs are where to start, but they do more than sort: each interaction raises or lowers a birth rate or a death rate, so each one drives the size of the populations in it. The rest of this guide takes them one at a time.

  • A community: interacting populations of different species, changing over time.
  • Score each interaction for each species: +, − or 0.
  • Each interaction changes births or deaths, so it drives population sizes.
Watch out In competition there is no + side. Even the species that wins ends up with less than it would have alone.
Competitionseedling on the leftseedling on the right
Predationhawkvole
Parasitismtickdeer
Mutualismbeeflower
Commensalismcattle egretcow

Tap a box to set its sign: +, − or 0 for that species. Tap again to change it.

A sixth case. A rabbit eats grass. Where does herbivory belong?

Five interactions, each with a pair of organisms. Tap each box to set +, − or 0 for that species, then check. A sixth card asks where herbivory belongs.

8.5.B Predator and prey

Each drives the other's numbers

  • Predators and prey drive each other's population sizes.
  • More prey feeds more predators; more predators cut the prey; fewer prey starve the predators; fewer predators let the prey recover.
  • The two curves rise and fall in turn, with the predators' peaks a step behind the prey's.
  • Predator and prey each evolve adaptations for catching and for escaping.

The detail

  • The snowshoe hare and lynx cycle, about ten years long, was first seen in fur trading records. Experiments in the Yukon showed that the hares' food matters as well as the lynx.
  • Isle Royale's wolves and moose, counted almost every winter since 1959, are the longest study of a predator and its prey. Moose there are limited by winter ticks, food and hot summers as well as by wolves.
  • A percent change: Isle Royale's moose fell from 840 in 2024 to about 524 in 2026, (524 − 840) ÷ 840 = −0.376, a fall of about 38%.

Reading the graph

  • A graph of predator and prey often has two y axes, one for each species, because their numbers differ so much. Read each line against its own axis.

A predator kills and eats its prey, so each changes the other's birth or death rate. When prey are plentiful, predators are well fed and raise more young. More predators then kill prey faster than the prey can replace themselves, so the prey fall. With fewer prey, predators go hungry, raise fewer young and die, and with fewer predators the prey recover. Round it goes, the predator's numbers always a step behind the prey's.

The film shows that cycle as a model, with invented numbers in the shape of the snowshoe hare and lynx records kept by fur traders in Canada, which rise and fall about every ten years. Watch which line peaks first. Then predict before you use the film's control.

At year 20 the lynx are trapped out of the forest. What happens to the hares in the next two years, and over the ten years after?

Real data are messier than a model. In the Yukon, experiments that fenced out predators and added food showed that the hares' cycle is driven by their winter food as well as by lynx. Predator and prey also shape each other over many generations: the figure shows adaptations for catching and for escaping. Tap each animal.

The best real record is from Isle Royale, an island in Lake Superior where wolves and moose have been counted almost every winter since 1959. The wolves fell to two by 2018, so 19 more were brought to the island in 2018 and 2019; by winter 2026 there were about 37 wolves, and the moose had fallen from 840 in 2024 to about 524, a fall of (524 − 840) ÷ 840, about 38%. Moose there are also limited by winter ticks, by their food and by hot summers. The last figure plots the counts on two y axes, one for each species. Cover the last years, predict, then reveal them.

  • Prey up, predators up; predators up, prey down; and round again.
  • The predator's curve lags the prey's.
  • Read a two-axis graph line by line, each against its own axis.
Watch out A predator does not "keep the prey at the right number" on purpose. Each species simply has more or fewer young as its food rises and falls; the cycle comes out of that.
PREDATORSPREYRattlesnakevenom, heat pitschemicalGolden poison frogtoxic, bright skinchemicalCheetahbursts of 100 km/hphysicalPorcupinebarbed quillsphysicalGray wolveshunt as a packbehavioralMeerkatsa sentry callsbehavioral

Tap a predator or a prey animal to read its adaptations.

0010500201,000301,500402,000502,500603,0001960197019801990200020102020wolves (number)moose (number)winterPredictfirstwolvesmooseGaps: no full count was made in 2021 or 2025.Counts: Isle Royale Wolf-Moose Project,Michigan Technological University.

Wolves after 2012:

Moose after 2012:

Choose for both, then reveal the covered winters.

Isle Royale's wolves (left axis) and moose (right axis), counted each winter since 1959 by the Michigan Technological University project. Predict the covered years, then reveal them.
Forty years of snowshoe hares and lynx, one year a second, as a model with invented numbers. Watch which population peaks first, then trap out the lynx or give the hares more food at year 20.

8.5.B Competition and niche partitioning

Same food, same place: one loses, or they divide it

  • Competition harms both species: each gets less of a limited resource than it would alone.
  • Species that compete can come to use different parts of a resource: niche partitioning (different depths, times of day, sizes of food).
  • Competition can set where a species actually lives.

The detail

  • Gause (1934): Paramecium aurelia drove P. caudatum out of a shared culture, but P. caudatum and P. bursaria lived together, because P. bursaria fed on yeast at the bottom of the tube.
  • MacArthur (1958) found five warblers in one forest of spruce, each feeding mostly in its own part of the trees.
  • Connell (1961): on a Scottish shore, Chthamalus barnacles survived lower down once Semibalanus was scraped away.

Watch out

  • "Two species can never share a niche" is too strong. They can, if they partition it.

Competition is the one interaction that leaves both sides worse off: every bit of food one species takes is lost to the other. What happens when two species need exactly the same food in the same small place? The Russian biologist G. F. Gause grew two species of Paramecium, single-celled protists that eat bacteria and yeast, in tubes of culture in the 1930s. The figure shows his results as each species grew alone. Predict before you switch to the others.

Two Paramecium species that eat the same bacteria are grown together in one tube. What will the counts show after three weeks?

Nothing ate P. caudatum; it simply lost the food to a faster competitor. But when Gause grew P. caudatum with a third species, P. bursaria, both survived: P. bursaria fed mostly on yeast at the bottom of the tube, the other on bacteria in the liquid above. Using different parts of a resource like this is niche partitioning. The film shows it on a sea cliff, where five seabirds that all eat fish nest in different places and feed at different depths. Robert MacArthur found the same among five warblers in one spruce forest, each feeding mostly in its own part of the trees.

Competition can also set where a species actually lives. On a rocky shore in Scotland, Joseph Connell scraped one barnacle, Semibalanus, off the rock. Another, Chthamalus, whose young settle all over the shore, then survived much lower down than it did with Semibalanus present. The second figure shows the shore. Where a species actually lives, set by its competitors, is sometimes called its realized niche.

  • Competition is − / −.
  • The same limited resource in the same place: one species is lost, or they partition it.
  • Competitors can confine a species to only part of the habitat it could use.
Watch out The species that dies out in competition is not killed by the other. It gets too little of the shared resource to replace its losses.
05010015020004812162024Daynumber in 0.5 mlP. aureliaP. caudatumEach aloneboth grow andlevel offP. aureliaP. caudatumTogetherP. caudatumis excludedP. caudatumP. bursariaDifferent nichesboth survive:partitioningP. bursaria feedson yeast at thebottomafter Gause, 1934 05010015020004812162024Daynumber in 0.5 mlP. aureliaP. caudatumEach aloneboth grow and level offP. aureliaP. caudatumTogetherP. caudatum is excludedP. caudatumP. bursariaDifferent nichesboth survive: partitioningP. bursaria feeds on yeastat the bottom of the tubeafter Gause, 1934

Switch between Gause’s cultures.

high tidelow tideupper shoreChthamalus only:Semibalanusdries out heremiddle shoreSemibalanussmothers andcrushes youngChthamaluslower shoreSemibalanusonly: it growsfasterChthamalus:where it surviveswhere it settles

Chthamalus larvae settle all the way down, but survive only where Semibalanus cannot.

Five seabirds share one North Atlantic cliff. Follow the camera from the cliff top to 100 m under the water and see where each nests and where each feeds. The birds are examples to reason with, not species to memorize.
200 µmDAY 6127P. aureliain 0.5 ml026P. caudatumin 0.5 mlCULTURESAMPLE
The bench: two species of Paramecium growing in one tube of culture. Each day a 0.5 ml sample goes into a counting chamber under the microscope, and each species is counted.

8.5.B Trophic cascades and cooperation

A change at the top runs down the chain

  • A trophic cascade: a change in the population at one feeding level passes down the food chain to the levels below it.
  • Cooperation, between individuals of one species or between species, can change what a population has access to.

The detail

  • Estes and Palmisano (1974) compared Aleutian islands: with sea otters, few urchins and thick kelp forests; without them, urchin barrens.
  • The term trophic cascade was coined by the ecologist Robert Paine in 1980.
  • Yellowstone's wolves, returned in 1995 and 1996, are often given as a cascade to willow and aspen; how strong it has been is still argued over, since elk, bison, climate and the loss of beavers all play a part.

Cooperation

  • A wolf pack can bring down a moose that no single wolf could, so hunting together opens up prey too large to take alone.

Effects in a community do not stop at the two species that meet. Along the Pacific coast of North America, sea otters eat sea urchins, and sea urchins graze giant kelp, a large brown alga that forms underwater forests sheltering fish, crabs and seals. Hunters had wiped out the otters along much of the coast by the early 1900s. Predict, then run the film and set the otters with its slider at 0, 5 and 10.

Sea otters are removed from a stretch of coast. What happens to the kelp?

A change at the top passed down two levels, and each level changed the opposite way to the one above: fewer otters, more urchins, less kelp. That is a trophic cascade. James Estes and John Palmisano saw it in 1974 by comparing islands in the Aleutians: where there were otters there were few urchins and thick kelp forests, and where there were none the rock was bare. Yellowstone's wolves, returned in 1995 and 1996, are often told as a cascade too, but how strong that one has been is still argued over by the scientists who study it. The food web bench lets you take a species out of a web and follow the effects.

Interactions are not all harm. Cooperation can change what a population has access to. A wolf pack can bring down a moose that no single wolf could, so wolves that hunt together can live on large prey; birds of several species that forage in one flock spot predators sooner. Cooperation between species, as a lasting partnership, is the subject of the next chapter.

  • Trophic cascade: a change at one level passes down, each level changing the opposite way.
  • Otters, urchins and kelp: the standard case.
  • Cooperation can open up food or safety a population could not reach alone.
Watch out In a cascade the levels do not all move together. Each one moves the opposite way to the level above it.
A stretch of Pacific coast over 40 years. In year 8 the number of otters changes: set it with the slider and watch the urchins, then the kelp, answer. A model with invented numbers in the shape of the real pattern.

8.5.B Symbioses: parasitism, mutualism and commensalism

Living together

  • A symbiosis is a close, lasting relationship between two species: parasitism (+ / −), mutualism (+ / +) or commensalism (+ / 0).
  • Each changes the partner's birth or death rate, so each can drive population sizes.
  • Coral and the algae in its cells are a mutualism: sugars one way, shelter, carbon dioxide and nitrogen compounds the other.

The detail

  • Zooxanthellae, single-celled algae, live inside cells of the coral's inner tissue layer and pass it sugars from photosynthesis.
  • Water that stays too warm makes the coral expel them; it turns white (bleaching) and may starve.
  • A parasite usually harms its host without killing it, because a dead host is no longer a home or a meal.

Watch out

  • Symbiosis does not mean both benefit. It means the two live closely together.

Some species do more than meet: they live in close, lasting contact, one on or inside the other. That is a symbiosis, and it comes in the three kinds you scored in chapter 6. In parasitism one species feeds on its host and harms it, usually without killing it: a tick on a deer, a tapeworm in a gut. In mutualism both gain. In commensalism one gains and the other is barely affected, like the barnacles on a whale.

Each changes a partner's births or deaths, so each drives a population. A parasite raises its host's death rate or lowers its birth rate. A mutualist does the opposite. The figure shows three mutualisms. The coral is the one to know well: single-celled algae called zooxanthellae live inside the cells of the coral's inner tissue layer and pass it sugars from photosynthesis, while the coral gives them shelter, carbon dioxide and nitrogen compounds from its wastes. Reef-building corals get most of their food this way.

A species' mutualist partner is removed from its habitat. What happens to that species' carrying capacity there?

Remember it The three symbioses: My Cat Purrs

  • MyMutualism+ / +: both gain
  • CatCommensalism+ / 0: one gains, one barely affected
  • PurrsParasitism+ / −: one gains at the host's cost
  • Symbiosis: close, lasting contact. Three kinds.
  • Each changes births or deaths, so each drives population sizes.
  • Coral and zooxanthellae: sugars for shelter, carbon dioxide and nitrogen compounds.
Watch out "Symbiosis" is not another word for mutualism. A parasite and its host are a symbiosis too.
Rhizobium insidebean plantthe plant givessugars fromphotosynthesisRhizobium givesammonium: nitrogenfixed from the airfungal coilsorchidthe fungus givessugars and mineralsto the young seedlingthe orchid givessugars back once ithas green leavesalgae inits tissuea hard coralzooxanthellae givesugars and oxygenfrom photosynthesisthe coral givesshelter, CO₂ andnitrogen compounds

8.5.A Species composition, species diversity and Simpson's Diversity Index

More than a count of species

  • A community's structure is measured and described by its species composition (which species are there) and its species diversity.
  • Species diversity can be put as a number, from the count of each species in a sample.
  • Simpson's Diversity Index = 1 − Σ(n/N)², where n is the number of organisms of one species and N the number of organisms of all species.
  • It runs from 0 (one species) toward 1; higher means more diverse.

Worked examples

  • Meadow A, 20 plants: 5, 5, 5, 5. Each share 0.25, each square 0.0625; sum 0.25; index 1 − 0.25 = 0.75, the most four species can score.
  • Meadow B, 20 plants: 17, 1, 1, 1. Shares 0.85, 0.05, 0.05, 0.05; squares 0.7225, 0.0025, 0.0025, 0.0025; sum 0.73; index 0.27.
  • Meadow C, 100 plants: 40, 30, 20, 10. Squares 0.16, 0.09, 0.04, 0.01; sum 0.30; index 0.70.
  • A stream net: 12 mayfly larvae, 6 caddisfly larvae, 2 snails. N = 20; squares 0.36, 0.09, 0.01; sum 0.46; index 0.54.
  • One species only: 1 − 1² = 0.

Error bars

  • Error bars of ± 2 standard errors of the mean give roughly a 95% confidence interval. Bars that do not overlap: the means probably differ. Bars that overlap: no evidence that they differ.

A list of the species in a community, its species composition, says who is there. It does not say how diverse the community is. The figure shows a quadrat thrown in each of two meadows. Both hold the same four species and 20 plants. Look at both, then predict.

Two meadows, each with the same four species and 20 plants in a quadrat. In A the counts are 5, 5, 5 and 5; in B they are 17, 1, 1 and 1. Which has the higher diversity index?

Species diversity depends on two things: how many species there are, and how evenly the individuals are shared among them. Your textbook may call these richness and evenness. Simpson's Diversity Index, on the formula sheet, puts one number on both:

Simpson's Diversity Index = 1 − Σ(n/N)²n, the total number of organisms of a particular species; N, the total number of organisms of all species

For meadow A, each species' share n/N is 5 ÷ 20 = 0.25. Square each, 0.0625, and add the four: 0.25. Take that from 1: the index is 0.75. For meadow B the shares are 0.85, 0.05, 0.05 and 0.05; their squares are 0.7225 and 0.0025 three times, which sum to 0.73, so the index is 0.27. A third meadow of 100 plants split 40, 30, 20 and 10 gives squares of 0.16, 0.09, 0.04 and 0.01, a sum of 0.30 and an index of 0.70. The total does not have to be 100: a stream net with 12 mayfly larvae, 6 caddisfly larvae and 2 snails has N = 20, shares of 0.6, 0.3 and 0.1, and an index of 1 − 0.46 = 0.54. A community of one species scores 1 − 1² = 0.

The bench below samples two real kinds of ground, a mown lawn and an unmown meadow, with quadrats thrown at random: fill in the table for the index yourself. Counts from quadrats vary, so a mean from several has an uncertainty. The last figure shows the mean number of species per quadrat at three sites with error bars of ± 2 standard errors, which give roughly a 95% confidence interval.

Mean species per quadrat, ± 2 standard errors: site A 12.0 ± 1.5, site B 16.0 ± 2.0, site C 13.0 ± 2.0. Which pair of sites probably differs?

Remember it Simpson's index, step by step

  • Countn and Neach species, then all
  • Sharen/Nfor each species
  • Square(n/N)²each share
  • SumΣ(n/N)²add the squares
  • Subtract1 − Σtake it from 1
  • Species composition: which species. Species diversity: how many, and how evenly shared.
  • Simpson's Diversity Index = 1 − Σ(n/N)²: 0 for one species, toward 1 for many, evenly shared.
  • Error bars of ± 2 SE: no overlap, probably different; overlap, no evidence of a difference.
Watch out Diversity is not the number of species. Two communities with the same species can differ a great deal in diversity. And use only this form of Simpson's index: other forms share the name and give other numbers.
same species, same totalplants counted5555Meadow A4 species20 plants in the quadratthe counts5 + 5 + 5 + 5plants counted17111Meadow B4 species20 plants in the quadratthe counts17 + 1 + 1 + 1campionbuttercupcornfloweroxeye daisy
One quadrat in each of two meadows: the same four species and the same total. The bars count the plants of each species.
0246810121416182012.0A16.0B13.0Csitemean number of species per quadratError bars: ± 2 SE (standard errors of the mean),roughly a 95% confidence interval.

Tap two bars (or Tab to them and press Enter) to compare their error bars.

Mean number of species per quadrat at three sites, with error bars of ± 2 standard errors of the mean. Invented data. Tap two bars to compare them.
Mown lawnUnmown meadowSimpson's Diversity Index = 1 − Σ(n/N)²kindnn/N(n/N)²grasswhite cloverdaisyplantainbuttercupyarrowN, all organismsΣ(n/N)²1 − Σ(n/N)²
A mown lawn and an unmown meadow, each 20 m by 12.5 m. Throw ten 1 m² quadrats at random on each, count every kind of plant, then work out Simpson's Diversity Index for each site in the table.

02Dry lab: The population growth bench

Grow yeast in a flask of sugar solution and count it every two hours. Set rmax and the carrying capacity, read the equation beside the curve, knock the flask with a cold shock or pour away half its sugar, and watch a J curve bend into an S.

rmax 0.5K 80sugar: some0 htime--.-million /cm³dead50 µmFLASKCOUNTING CHAMBER040801200612182430time (hours)N (million cells per cm³)N =(K − N)/K =dN/dt =
The bench: yeast in a flask of sugar solution, counted every 2 hours. Set rmax and the carrying capacity, K, run 30 hours, then tap the graph at an hour to read the logistic growth equation there.
Your questionHow does a population of yeast grow in a flask, and what makes it stop? Predict first: at what size is the population adding cells fastest, and does doubling rmax change the size it finally holds at?
What you can changeThe maximum per capita growth rate, rmax (per hour), and the sugar in the flask, which sets the carrying capacity, K. You can also chill the flask at hour 14, a density-independent factor, or pour away half the sugar at hour 14, which lowers K.
What to recordThe count every two hours; at the hours you tap, N, (K − N)/K and dN/dt; the size where growth is fastest; and the plateau. Then graph the counts by hand with a title, labeled axes with units, a sensible scale and a line. The yeast is a model with invented numbers; the pattern is what real yeast cultures show.

Find out

  • Where is growth fastest? Predict the size at which the flask adds cells fastest. Run it with the carrying capacity on, tap the graph at several hours and read N, (K − N)/K and dN/dt at each. Find the size where dN/dt is largest and compare it with K.
  • Double rmax. Before you run it, write whether K will change. Then run it and compare the two curves: which reaches the plateau sooner, and where is each plateau?
  • Double K. Predict whether the first few hours change. Then run it and compare the early counts and the plateaus.
  • Start above K. Pour away half the sugar at hour 14 and predict what N does next. Then try the cold shock at hour 14 instead: which knock changes K, and which only knocks N down?
  • Graph it by hand. From the bench's table, draw a full graph of one run: a title, labeled axes with units, a sensible scale, the points plotted and a line. Swap with a partner and check each other's against those five points.

Record

  • The count every two hours, for each run, with its rmax and K.
  • For three hours you tap: N, (K − N)/K and dN/dt, and a line saying which part of the equation is small at each.
  • The size where growth was fastest, and the plateau, for each run.
  • What each knock did to N and to K. Download CSV keeps every reading. The yeast is a model with invented numbers, not data from real cells.

You double rmax and keep the sugar the same. What happens to the plateau?

With K = 120 million cells per cm³ on the bench, at about what count will the curve be steepest?

At hour 14 the cold shock kills 60% of the cells. Afterward, where does the population level off?

Back to the equation

Use the logistic equation to explain the shape of your curve: why growth was slow at first, fastest in the middle, and zero at the end.

03Check

A fresh paper from the exam bank on this guide's topics each time: past-paper style questions, marked as you go, and saved to your Exam practice progress when you are signed in.

Exam practice

Exam questions on 8.3 to 8.5, marked

Start 15 marks of exam questionsYour exam practice

Quiz: population ecologyQuiz: community ecologyUnit 8 escape roomGrass skirts: populations and communitiesRevision map: population ecologyRevision map: effect of density on populationsRevision map: community ecologyBlurting diagrams: exponential and logistic growth, density factors, interactions between species, a trophic cascadeUnit 8 pub quizGuide: energy flow and matter cycles (food chains and webs)Guide: biodiversity and disruptions (keystone species)Unit 8 practice questions

04Downloads

Take the guide with you, or into a classroom with no internet.

05Teacher resources

The guide as six one-hour lessons: what each covers, its focus and the chapters it uses.

LessonCoversFocusChaptersLesson planSlides
1Counting change; growth with no limits 8.3.A60 min What a population is, dN/dt = B − D with per capita rates, the doubling model and exponential growth, dN/dt = rmax N 1, 2, 3
2Limits 8.4.A60 min Carrying capacity, overshoot and crash, density-dependent and density-independent factors, and the logistic equation worked at five sizes 4, 5
3The population bench; graphing 8.3.A, 8.4.A60 min The population bench in AP mode: rmax and K, the equation beside the curve, density-independent knocks, and a graph drawn by hand 5, dry lab
4A community and its hunters 8.5.B60 min A community scored by its interactions (+, −, 0), predator and prey cycles, and two-axis graphs of Isle Royale's wolves and moose 6, 7
5Rivals, cascades and partners 8.5.B60 min Competition and niche partitioning with Gause's Paramecium, the sea cliff and the barnacles; a trophic cascade; the three symbioses as short presentations 8, 9, 10
6Measuring diversity 8.5.A60 min Species composition and diversity, Simpson's Diversity Index worked by hand and on the quadrat bench, and error bars of ± 2 SE 11

The revision sheet and the offline copy are in Downloads, for you and the class.

PRACTICE AND REVIEW

Make it for your class, or set it

Build for your class

Already on the site for Unit 8

Card sets on splycr

Open a set to host it as a class game, or make a copy to edit.

How this was made. The course structure, the activities and the teaching choices come from my own classroom, my presentations and my years of teaching IB and AP Biology. I use Claude, an AI, to help write and build the interactive guides, lesson plans, slides and practice questions, and to draw the diagrams and code the interactives. I direct the work and review it against the IB and AP specifications before it goes live. Sources and acknowledgements.