Biology  by Bradford
support
IB Biology · November 2026 style mock · 1 hour 30 minutes

IB Biology Paper 2 SL mock, November 2026 style. What that session left out.

The November 2026 IB Biology papers are sat. This Paper 2 (Standard level) is written in their style, at their length and with the same mix of figures and data, but on the syllabus statements they did not test, so it works as the next paper rather than a repeat: 50 marks across 7 questions, every one original and tagged to the 2025 guide. Sit it on screen against the clock and mark yourself, or print it for a class.

What the real paper requires

1 hour 30 minutes · 50 marks · 44% of the final grade.

  1. Section A34 marks One long data question, then short-answer questions. Answer all.
  2. Section B16 marks Two extended-response questions. Answer one. Three parts summing to 15, plus 1 mark for construction.

On the front of the paper

For the calculations, practise with IB Biology data booklet skills.

How this mock is built

November 2026 Paper 2 opened on a long ecology data set and set its essays on signalling, the history of evolution and genetics, and respiration. This one opens on a different data set, and its Section B themes stay off those topics and the carbon cycle, so it rehearses the long answers that session did not ask for.

The code on the paper rebuilds this exact mock and its markscheme. Build a fresh mock draws a new one from the same rules, so a second sitting is never the first one memorised.

Other mocks

The mock

Take it online → Build a fresh mock Paper code BbB-GQD______wAAkheW
Biology · Paper 2
Standard level · mock examination
90 minutes50 marks (including construction marks)

Paper code: this paper was generated, so the code is its recipe. Enter it at biologybybradford.com/exam-maker to rebuild this exact paper and its markscheme.

Covers All four themes, away from the statements November 2026 tested
  • Do not open this examination paper until instructed to do so.
  • Section A: answer all questions.
  • Section B: answer one question.
  • A calculator is required for this paper.
  • Answers must be written within the answer boxes provided.
Name:
Section A

Answer all questions. Answers must be written within the answer boxes provided.

1.

Leaves growing at the top of a beech tree (Fagus sylvatica) are exposed to full sunlight (sun leaves), whereas leaves lower in the canopy are shaded (shade leaves). Researchers made casts of the lower epidermis of 20 sun leaves and 20 shade leaves from one tree and counted the stomata in five fields of view on each cast. They also measured the area of each leaf. Other leaves of each type were then kept under two light intensities in a chamber at constant temperature and humidity, and the rate of transpiration per unit leaf area was measured. All values are means ± standard error (SE).

MeasurementConditionSun leaves (± SE)Shade leaves (± SE)
Stomatal density of lower epidermis / stomata mm⁻²n = 20 leaves312 ± 14198 ± 11
Leaf area / cm²n = 20 leaves21.4 ± 1.334.9 ± 1.9
Transpiration rate / mmol m⁻² s⁻¹low light intensity1.2 ± 0.10.9 ± 0.1
Transpiration rate / mmol m⁻² s⁻¹high light intensity3.6 ± 0.21.8 ± 0.2
(a)Calculate the percentage by which the stomatal density of sun leaves exceeds that of shade leaves.[2]
(b)Deduce, with a reason, whether the difference in stomatal density between sun and shade leaves is statistically significant.[2]
(c)All the leaves were taken from one tree. Suggest one reason for this choice and one limitation it places on the conclusions.[2]
(d)Suggest one advantage to a sun leaf of having a higher stomatal density than a shade leaf.[1]
(e)Describe the effect of light intensity on the rate of transpiration in the two types of leaf.[2]
(f)Using data from the table, explain the difference between the transpiration rates of sun and shade leaves at high light intensity.[2]
(g)The chamber was kept at constant temperature and humidity. Explain how each of these two factors affects the rate of transpiration.[3]
2.

The drawing was made from an electron micrograph of a bacterium. On the printed page the scale bar is 35 mm long.

500 nm
(a)Calculate the magnification of the drawing.[2]
(b)A typical animal cell is 20 µm across. Calculate how many times longer it is than this bacterium.[1]
3.

The drawing shows a cell as it appears in an electron micrograph, with four structures labelled I to IV. Identify structures I, II, III and IV.

[4]
IIIIIIIV20 μm
I.
II.
III.
IV.
4.

A student isolated a species of Streptomyces, a soil bacterium that grows as branching filaments, from garden soil. She streaked it in a band near one edge of a nutrient agar plate and incubated the plate for five days. She then streaked four other species of bacterium, P, Q, R and S, in lines at right angles to the band, each starting 2 mm from it, and incubated the plate for two more days. The diagram shows the plate after this.

PQRS Streptomyces (grown for 5 days first) growth of test bacterium visible streaked, but no growth visible 10 mm
(a)Identify the species of bacterium whose growth was most strongly inhibited.[1]
(b)Explain the pattern of growth of species P, R and S near the Streptomyces band.[2]
(c)Suggest why species Q grew right up to the band.[1]
(d)Suggest why the Streptomyces was grown for five days before the other species were streaked.[2]
5.

In rabbits (Oryctolagus cuniculus), coat colour is controlled by one gene with several alleles. Three of them are Cᶠ, which gives full colour, Cᵍ, which gives a chinchilla (silver-grey) coat, and Cᵃ, which gives an albino (all white) coat. A breeder recorded the offspring of two crosses over several litters.

CrossParentsOffspring
1chinchilla, from a line that has bred true for many generations × albino17 chinchilla
2full colour × chinchilla13 full colour, 7 chinchilla, 6 albino
(a)Deduce, with reasons, the order of dominance of the three alleles.[3]
(b)Deduce the genotypes of the two parents in cross 2.[2]
(c)Each full-colour offspring of cross 2 carries Cᶠ with either Cᵍ or Cᵃ. Outline a cross that would show which of these a particular full-colour offspring carries, and the results expected in each case.[2]
Section B

Answer one question. Answers must be written within the answer boxes provided. One additional mark is available for the construction of your answers for each question.

6.

Elements cycle through ecosystems, and human inputs can overload those cycles.

(a)Outline the role of decomposers in recycling chemical elements in ecosystems.[4]
(b)Explain how leaching of fertilizers can lead to the death of fish in rivers and lakes.[7]
(c)Outline how abiotic variables affect the distribution of species in an aquatic habitat.[4]
7.

Structure fits function at every level of biological organization.

(a)Outline the relationship between surface area-to-volume ratio and the size of cells.[4]
(b)Explain how the structures of starch, glycogen and cellulose make each suited to its function.[7]
(c)Describe the adaptations of capillaries for exchange of materials with tissues.[4]

Original practice questions © Biology by Bradford · CC BY-NC-SA 4.0 · Not affiliated with or endorsed by the International Baccalaureate Organization.
Rebuild or edit this exact paper (and its markscheme): biologybybradford.com/exam-maker?code=BbB-GQD______wAAkheW

Show the markscheme

Markscheme BbB-GQD______wAAkheW

One mark per point; / separates alternative wording within a point, OR separates alternative answers, words in brackets are not required, underlined words are essential. OWTTE = or words to that effect.

1. B3.1.10, B3.1.9
  • (a) [2]
    • (312 − 198) ÷ 198 × 100;
    • = 58 (%);

    Accept 57.5 to 58 %. Award [1] for a correct difference of 114 stomata mm⁻² with working shown, or for 36.5 % / 37 % (using 312 as the denominator), or for 158 % ((312 ÷ 198) × 100, presented as a ratio).

  • (b) [2]
    • significant / the two types of leaf differ in stomatal density;
    • the ranges of mean ± SE (298 to 326 and 187 to 209) do not overlap / the difference between the means is far larger than the standard errors, so it is unlikely to be due to chance, OWTTE;

    The reason must refer to the standard errors / error bars not overlapping.

  • (c) [2 max]
    • (reason) using one tree removes genetic differences (and differences in soil, water supply and age) between trees, so the difference can be attributed to the leaves' exposure to light, OWTTE;
    • (limitation) the results may not be representative of other beech trees / cannot be generalized to beech trees in general (or to other species);
    • more trees, from different sites, would need to be sampled to show that the pattern is general, OWTTE;

    Award [1] for a reason and [1] for a limitation.

  • (d) [1 max]
    • more stomata allow faster uptake of carbon dioxide to support the higher rate of photosynthesis possible in bright light, OWTTE;
    • OR greater transpiration cools the leaf, which is exposed to more heat from the sun;

    Accept either advantage.

  • (e) [2 max]
    • transpiration is higher at high light intensity than at low light intensity in both types of leaf;
    • the increase is greater in sun leaves (1.2 to 3.6, a threefold increase) than in shade leaves (0.9 to 1.8, a twofold increase), OWTTE;
    • at low light intensity the difference between the two leaf types is small (1.2 compared with 0.9 mmol m⁻² s⁻¹), whereas at high light intensity sun leaves transpire twice as fast as shade leaves (3.6 compared with 1.8), OWTTE;
  • (f) [2 max]
    • light causes stomata to open, so at high light intensity water vapour can diffuse out through the (open) stomata;
    • sun leaves have more stomata per mm² (312 compared with 198), so there are more pores through which water vapour can escape from each unit of area, OWTTE;
    • (so) sun leaves lose water twice as fast per unit area (3.6 compared with 1.8 mmol m⁻² s⁻¹);

    Award the second mark only if the explanation refers to stomatal density, not leaf area, since transpiration is expressed per unit area.

  • (g) [3]
    • higher temperature increases the rate of transpiration;
    • because water evaporates faster from the (walls of) mesophyll cells / water molecules have more kinetic energy and diffuse faster, OWTTE;
    • higher humidity decreases the rate of transpiration;
    • because the concentration gradient of water vapour between the air spaces inside the leaf and the air outside is smaller, so diffusion out through the stomata is slower, OWTTE;
    • (at very high temperatures / low humidity) stomata may close, which reduces transpiration;

    For full marks both factors must be covered, each with the direction of the effect and a reason.

2. A2.2.2
  • (a) [2]
    • 35 mm = 35 000 000 nm / 35 000 µm;
    • 35 000 000 ÷ 500 = × 70 000;
  • (b) [1]
    • 20 ÷ 2 = 10 times;
3. A2.2.10 [4]
  • I, cell wall;
  • II, chloroplast;
  • III, (large central) vacuole;
  • IV, nucleus;

Accept nuclear envelope/nuclear membrane for IV. Do not accept plasma membrane for I: the leader ends on the thick outer layer, not the membrane inside it.

4. C4.1.18
  • (a) [1]
    • P;
  • (b) [2]
    • the Streptomyces secretes an antibiotic into the agar;
    • the antibiotic diffuses outwards, so its concentration decreases with distance from the band;
    • close to the band the concentration is high enough to kill the test bacteria / prevent their growth;
    • the species differ in sensitivity, so the length of the zone without growth differs (longest for P) / each species grows only where the concentration is below the level it can tolerate, OWTTE;
  • (c) [1]
    • Q is not affected by / tolerates the antibiotic secreted by this Streptomyces (e.g. it lacks the target of the antibiotic) OR Q breaks down / inactivates the antibiotic, OWTTE;
  • (d) [2]
    • to give the Streptomyces time to grow, since it grows more slowly than the test bacteria;
    • to allow time for it to secrete the antibiotic;
    • and for the antibiotic to diffuse into the surrounding agar;
    • if all were streaked together, the test bacteria could grow before any antibiotic was present, OWTTE;
5. D3.2.5, D3.2.8
  • (a) [3]
    • Cᵍ is dominant to Cᵃ: every offspring of cross 1 receives Cᵃ from the albino parent, yet all are chinchilla;
    • Cᶠ is dominant to Cᵃ: the full-colour parent in cross 2 must carry Cᵃ, since it has albino offspring, yet it has full colour;
    • Cᶠ is dominant to Cᵍ: half of the offspring of cross 2 are full colour (2 : 1 : 1, not 1 : 2 : 1), so the CᶠCᵍ offspring, a quarter of the total, must show full colour;
    • order: Cᶠ > Cᵍ > Cᵃ;

    The order alone, with no reasons, scores [1].

  • (b) [2]
    • full-colour parent CᶠCᵃ;
    • chinchilla parent CᵍCᵃ;
    • both must carry Cᵃ, because the albino offspring (CᵃCᵃ) received Cᵃ from each parent;
  • (c) [2]
    • cross it with an albino (CᵃCᵃ) rabbit;
    • if it is CᶠCᵍ: about half full colour and half chinchilla offspring, and no albinos;
    • if it is CᶠCᵃ: about half full colour and half albino offspring, and no chinchillas;
    • count the offspring of several litters, since a small litter could lack one class by chance, OWTTE;

    Award the second mark only if the expected results for both genotypes are given.

6.
  • (a) C4.2.22 [4 max]
    • decomposers / saprotrophs feed on dead organic matter / faeces;
    • they secrete enzymes and digest it externally;
    • releasing inorganic nutrients such as nitrate / phosphate / ammonium;
    • which are absorbed by plants / producers;
    • carbon is released as carbon dioxide by their respiration;
    • so elements are recycled rather than lost from the ecosystem;
  • (b) D4.2.8 [7 max]
    • nitrate / phosphate fertilizers are applied in excess / soluble;
    • rain washes them off fields into rivers and lakes / leaching;
    • nutrients are no longer limiting, so algae grow rapidly / algal bloom;
    • algae block light from plants below;
    • plants and algae die;
    • dead matter is decomposed by aerobic bacteria;
    • which use up oxygen / increase the biochemical oxygen demand (BOD);
    • oxygen concentration falls, especially near the bottom;
    • fish cannot respire aerobically, so they die or leave;
    • eutrophication;
  • (c) B4.1.3, B4.1.4 [4 max]
    • abiotic variables include temperature / dissolved oxygen / light / pH / salinity / flow rate;
    • each species has a range of tolerance for each variable;
    • a species is found only where conditions are within its range;
    • the variable furthest from the optimum limits its distribution / limiting factor;
    • example of a species limited by a named abiotic variable;

Plus 1 mark for the construction of the answer: clear enough to be understood without re-reading, succinct, with little or no repetition or irrelevant material.

7.
  • (a) B2.3 [4 max]
    • exchange (of materials/heat) with surroundings occurs across the surface (membrane);
    • demand for exchange depends on the volume (of cytoplasm/metabolism);
    • as size increases, volume grows faster than surface area / SA:V ratio decreases;
    • (so) cell size is limited, large cells cannot supply their interiors fast enough;
    • adaptations (microvilli/flattening/folding) increase surface area where high rates of exchange are needed, OWTTE;
  • (b) B1.1 [7 max]
    • all three are polysaccharides / polymers of glucose (linked by glycosidic bonds);
    • starch and glycogen are made of α-glucose, whereas cellulose is made of β-glucose;
    • starch (amylose) coils into compact helices, suiting storage in plants;
    • branching (amylopectin/glycogen) provides many ends for rapid glucose addition/removal;
    • glycogen is more (highly) branched, matching animals' need to mobilize glucose quickly;
    • starch and glycogen are insoluble/osmotically inactive, so storage does not draw in water;
    • cellulose forms straight chains (alternating glucose orientation);
    • chains hydrogen-bond side-by-side into microfibrils of high tensile strength;
    • (so) cellulose provides structural support in (plant) cell walls, OWTTE;
  • (c) B3.2 [4 max]
    • walls one cell thick / single layer of (flattened) endothelium, giving a short diffusion distance;
    • very narrow vessels penetrating close to (almost) every cell;
    • enormous total surface area (from vast numbers of capillaries);
    • slow blood flow (in capillary beds) allowing time for exchange;
    • fenestrations/pores in some capillaries let plasma (fluid) leak out to form tissue fluid, OWTTE;

Plus 1 mark for the construction of the answer: clear enough to be understood without re-reading, succinct, with little or no repetition or irrelevant material.

Practice by subtopic →  ·  Extended response questions →  ·  Command terms →  ·  Open the exam maker →