Biology  by Bradford
support
AP BIOLOGY · UNIT 4 · CELL COMMUNICATION AND CELL CYCLE

How cells pass a message on

A hormone in your blood never enters the liver cell it changes. A T cell is switched on by touch, and bacteria in a squid light up only when there are enough of them. Follow a signal from the cell that sends it, through the receptor and the relay inside, to what the cell does, and see what happens when one link breaks.

AP Biology 4.1 to 4.33 lessons11 chaptersdry lab

Start learningRun the dry labTeach it

Epinephrine in the blood reaches a liver cell. Dive through the membrane and watch the message passed on and multiplied until glucose pours out.
NavigationBy the end you cantap a goal to go to its chapter

01Learn

Eleven chapters: how far a signal travels (chapters 1 to 3), the receptor and the relay inside the cell (4 to 9), what the cell does (10), and what happens when a link breaks (11). Make each prediction before you open the answer.

NavigationChapterstap a chapter to jump to it
  1. 1Cells that touch to talk
  2. 2Near or far
  3. 3Bacteria that count heads
  4. 4A receptor fits one messenger
  5. 5Reception, transduction, response
  6. 6A receptor that wakes a G protein
  7. 7One hormone, millions of glucose
  8. 8A receptor that is a gate
  9. 9Kinase receptors, and receptors inside
  10. 10What a signal makes a cell do
  11. 11When a pathway breaks

4.1.A Cell communication by direct contact

Cells that touch to talk

  • Nearly all messages between cells are chemicals. Cells that touch can pass a message straight across: direct contact.
  • Gap junctions: protein tunnels joining the cytoplasm of two animal cells. Ions and small molecules pass; proteins are too big.
  • Plasmodesmata: channels through plant cell walls, lined with plasma membrane, so the cytoplasm of one cell runs on into the next.
  • Surface contact: a molecule on one cell binds a receptor on the other, as when an antigen-presenting cell (APC) switches on a helper T cell.

The detail

  • Every cell in your body is listening for messages. The first thing that sorts them is how far the chemical has to travel; the shortest trip is no trip at all.
  • A gap junction is a ring of proteins in each membrane, the two rings lined up to make a tunnel. Sugars are among the small molecules that pass.
  • Heart muscle cells are joined by gap junctions, so the electrical signal to contract runs from cell to cell and the heart beats as one.
  • Plant cells are boxed in by walls. Water, ions, sugars and signaling molecules move along plasmodesmata from cell to cell.
  • Surface contact needs no tunnel.

Examples

  • An APC shows a fragment of a pathogen on its surface. A helper T cell whose receptor fits that fragment binds it and is switched on; one whose receptor does not fit passes by.
  • Killer T cells recognize infected cells by touch in the same way.

Watch out

  • Direct contact still uses chemicals: ions through a gap junction, a fragment of pathogen on an APC.
  • What makes it direct is that nothing has to cross the fluid between the cells.

Every cell in your body is listening for messages, and nearly all of them arrive as chemicals. The first thing that sorts them is how far the chemical has to travel. The shortest trip is no trip at all: cells that touch can pass a message straight across.

Animal cells side by side can be joined by gap junctions: a ring of proteins in each membrane, the two rings lined up to make a tunnel from one cytoplasm into the next. Ions and small molecules such as sugars pass through; proteins are too big. Heart muscle cells are joined this way, so the electrical signal to contract runs from cell to cell and the heart beats as one.

A drug blocks the gap junctions of one heart muscle cell. The signal to contract reaches its neighbors as usual. What does the blocked cell do?

Plant cells are boxed in by walls, but the walls are crossed by plasmodesmata: narrow channels lined with plasma membrane, so the cytoplasm of one cell runs on into the next. Water, ions, sugars and signaling molecules move along them from cell to cell.

The third kind of contact needs no tunnel. A molecule held on the surface of one cell binds a receptor on the other. In your immune system an antigen-presenting cell (APC) shows a fragment of a pathogen on its surface. A helper T cell whose receptor fits that fragment binds it and is switched on; one whose receptor does not fit passes by. Killer T cells recognize infected cells by touch in the same way.

  • Gap junctions: protein tunnels between animal cells.
  • Plasmodesmata: channels through plant cell walls.
  • Surface contact: a molecule on one cell binds a receptor on the other (an APC and a T cell).
Watch out Direct contact still uses chemicals: ions through a gap junction, a fragment of pathogen on an APC. What makes it direct is that nothing has to cross the fluid between the cells.
Three kinds of contact: a gap junction between animal cells, plasmodesmata through plant walls, and an antigen-presenting cell meeting two T cells. Watch which cells respond.

4.1.B Signaling over short and long distances

Near or far

  • Most signals cross the fluid between cells, and how far they go sorts them into two kinds.
  • A local regulator acts on cells near the one that released it, over a fraction of a millimeter, and is then broken down or taken up.
  • Local regulators: paracrine signaling (molecules diffuse to neighbors) and synaptic signaling (a neurotransmitter across a cleft about 20 nm wide).
  • Endocrine signaling: a gland releases a hormone into the blood, which carries it to target cells anywhere in the body.
  • Only target cells, the ones with a receptor for the hormone, respond.

The detail

  • Paracrine: a growth factor from one cell makes the cells around it divide.
  • Synaptic: the neurotransmitter reaches receptors on the next cell in well under a millisecond.
  • Endocrine: the blood carries a hormone round the body in about a minute.
  • Plants signal over long distances too, their hormones carried in the xylem and phloem: the second film.

Watch out

  • A hormone in the blood reaches nearly every cell in the body, not only its targets.
  • What makes a cell a target is its receptor, not where it is.

Most signals do cross the fluid between cells, and how far they go sorts them into two kinds. A local regulator acts on cells near the one that released it, over a fraction of a millimeter, and is then broken down or taken up.

In paracrine signaling a cell releases molecules that diffuse to its neighbors: a growth factor from one cell makes the cells around it divide. In synaptic signaling a neuron releases a neurotransmitter into a cleft about 20 nm wide, and it reaches receptors on the next cell in well under a millisecond.

A neuron releases a neurotransmitter and the pancreas releases insulin at the same moment. Which reaches its target cells first, and why?

A hormone goes much further. In endocrine signaling a gland releases it into the blood, which carries it round the body in about a minute. It reaches almost every cell, but only its target cells, the ones with a receptor for it, respond. Plants signal over long distances too, their hormones carried in the xylem and phloem: the second film.

Five hormones the AP course names
HormoneMade inMain targets
Insulinbeta cells of the pancreasliver, muscle and fat cells: take up glucose
Human growth hormonepituitary glandliver, bone and muscle: growth
Thyroid hormonesthyroid glandnearly every cell: a faster metabolism
Testosteronetestesmuscle, bone, reproductive organs
Estrogenovariesuterus, breasts, bone
  • Local regulators: paracrine (diffuse to neighbors) and synaptic (across a 20 nm cleft).
  • Hormones: endocrine, in the blood, to target cells anywhere.
  • A cell is a target only if it has the receptor.
Watch out A hormone in the blood reaches nearly every cell in the body, not only its targets. What makes a cell a target is its receptor, not where it is.
A growth factor diffuses to the cells nearby, and a motor neuron signals a muscle fiber across a synapse. Watch which cells respond, and how far the signal goes.
Insulin carried round the body in the blood, then plant hormones in the xylem and phloem. Switch the reach to compare distance, time and how many cells each signal reaches.

4.1.A 4.3.A Quorum sensing

Bacteria that count heads

  • Quorum sensing is signaling that measures population density.
  • Each cell releases a small signaling molecule, an autoinducer, and carries receptors for it: more cells, higher concentration.
  • Above a threshold the autoinducer binds receptors and switches genes on in every cell.
  • The response is a change in gene expression, set off by the cells’ environment: how many neighbors they have.

The detail

  • One bacterium making light, or a toxin, or a slimy biofilm, wastes its effort: these only pay off when thousands do them together.
  • So many bacteria wait until they are crowded, and they find out how crowded by chemistry.
  • A population acts together only when it is big enough for it to matter.

The glowing squid

  • The ocean bacterium Vibrio fischeri lives in the light organ of the Hawaiian bobtail squid.
  • Spread thin in seawater, its autoinducer drifts away and stays dilute, and the cells stay dark.
  • Packed into the squid, the molecules build up. Above a threshold they bind receptors inside the bacteria (the autoinducer is small enough to cross the membrane).
  • The bound receptors switch on the genes for light. Glowing cells make more autoinducer, so the whole population lights up together.
  • The squid hunts at night and uses the glow to hide its shadow from fish below.

Examples

  • Vibrio cholerae and Pseudomonas aeruginosa use quorum sensing to time their biofilms and toxins, which is why drugs that jam the signal are being tested.

One bacterium making light, or a toxin, or a slimy biofilm, wastes its effort: these only pay off when thousands do them together. So many bacteria wait until they are crowded, and they find out how crowded by chemistry. Each cell releases a small signaling molecule, an autoinducer, and carries receptors for it. This is quorum sensing: signaling that measures population density.

The ocean bacterium Vibrio fischeri lives in the light organ of the Hawaiian bobtail squid. Spread thin in seawater, its autoinducer drifts away and stays dilute, and the cells stay dark. Packed into the squid, the molecules build up. Above a threshold they bind receptors inside the bacteria (the autoinducer is small enough to cross the membrane), and the bound receptors switch on the genes for light. Glowing cells make more autoinducer, so the whole population lights up together. The squid hunts at night and uses the glow to hide its shadow from fish below.

A flask of Vibrio fischeri has just begun to glow. You dilute it tenfold with fresh seawater. What happens to the light?

The response is a change in gene expression, set off by the cells' environment: how many neighbors they have. Vibrio cholerae and Pseudomonas aeruginosa use quorum sensing to time their biofilms and toxins, which is why drugs that jam the signal are being tested.

  • Every cell releases an autoinducer; more cells, higher concentration.
  • Above a threshold it binds receptors and switches genes on in every cell.
  • A population acts together only when it is big enough for it to matter.
A flask of Vibrio fischeri. Watch the signal build as the cells divide. Then change the starting number of cells and see when the light comes on.

4.2.B Ligands and receptors

A receptor fits one messenger

  • A signaling molecule is a ligand, and the protein it binds is its receptor.
  • The ligand-binding domain has a shape and a pattern of charges that fit one ligand: the fit is one to one.
  • The ligand can be a protein such as insulin, a short peptide, or a small molecule such as epinephrine or a steroid.
  • Hydrophilic or large ligand: a receptor in the membrane. Hydrophobic ligand (a steroid): a receptor inside the cell.

The detail

  • The ligand-binding domain fits its ligand the way an active site fits its substrate. The insulin receptor binds insulin and nothing else in your blood.
  • Binding is weak and reversible: ligands come and go, so the more ligand there is, the more receptors are filled at any moment (the dry lab measures this).
  • A cell with no receptor for a ligand cannot respond to it, however much is around.

Where the receptor sits

  • The core of the membrane is hydrophobic.
  • Hydrophilic and large ligands (proteins, peptides, epinephrine) cannot cross it, so their receptors span the membrane.
  • Hydrophobic ligands, such as the steroids testosterone and estrogen, slip through the bilayer, and their receptors wait in the cytoplasm or the nucleus.

Watch out

  • With a receptor in the membrane, the ligand never enters the cell.
  • The receptor carries the message across by changing shape, and molecules inside relay it on.

A signaling molecule is a ligand, and the protein it binds is its receptor. Part of the receptor, the ligand-binding domain, has a shape and a pattern of charges that fit one ligand, the way an active site fits its substrate. The fit is one to one: the insulin receptor binds insulin and nothing else in your blood. The ligand can be a protein such as insulin, a short peptide, or a small molecule such as epinephrine or a steroid.

A new drug is a short chain of amino acids, a peptide, and it must act on liver cells. Where do you expect to find its receptor?

Binding is weak and reversible: ligands come and go, so the more ligand there is, the more receptors are filled at any moment (the dry lab measures this). A cell with no receptor for a ligand cannot respond to it, however much is around.

Where the receptor sits depends on the ligand. The core of the membrane is hydrophobic. Hydrophilic and large ligands (proteins, peptides, epinephrine) cannot cross it, so their receptors span the membrane. Hydrophobic ligands, such as the steroids testosterone and estrogen, slip through the bilayer, and their receptors wait in the cytoplasm or the nucleus.

  • The ligand-binding domain fits one ligand: one to one.
  • Hydrophilic or large ligand: a receptor in the membrane.
  • Hydrophobic ligand (a steroid): a receptor inside the cell.
Watch out With a receptor in the membrane, the ligand never enters the cell. The receptor carries the message across by changing shape, and molecules inside relay it on.
OUTSIDE THE CELLCYTOPLASMligandligandbinding sitereceptor (a protein)plasma membraneCircle: the shape does not fit the binding site,so it does not bind and the receptor stays off.Square: the shape does not fit the binding site,so it does not bind and the receptor stays off.Triangle: the shape fits the binding site, so it bindsand the receptor changes shape and switches on.

Try each ligand in turn.

ligandmembrane receptorsteroidreceptor inside the cellOUTSIDE THE CELLCYTOPLASMplasma membraneWater-soluble ligand: cannot cross the bilayer.It binds the outside of a transmembrane receptor.hydrophilic amino acidshydrophobic amino acidsLipid-soluble ligand (a steroid): crosses the bilayerand binds an intracellular receptor.

Switch between a water-soluble and a lipid-soluble ligand.

4.2.A Components of a signal transduction pathway

Reception, transduction, response

  • A signal transduction pathway links what the receptor senses to what the cell does, in three stages.
  • Reception: the ligand binds its receptor, which changes shape. Transduction: the change is passed along a chain of molecules, each switching on the next.
  • Response: the last molecules do something: an enzyme starts work, a channel opens, a gene is read.
  • A protein kinase adds the end phosphate from ATP to its target; a protein phosphatase takes it off again.
  • In a phosphorylation cascade kinase switches on kinase, each one acting on many of the next.

The detail

  • Every pathway in this guide runs in these three stages.
  • Most relay molecules are proteins, and the commonest way to switch one on or off is to change it slightly: protein modification.
  • The usual change is a phosphate group, added to an amino acid of the target.
  • The new negative charges change how the target folds, and so what it does.
  • Often the target is itself a kinase, which is what makes a cascade.
  • Switching off matters as much: the phosphatase lets each relay go back to rest once the signal stops.
  • The cell responds while the ligand is there, and stops when it goes.

Watch out

  • The phosphate a kinase adds is a switch, not fuel. It changes the shape of the protein it is put on; the cell is not storing energy there.

Every pathway in this guide runs in three stages. In reception the ligand binds its receptor, and the receptor changes shape. In transduction that change is passed along a chain of molecules inside the cell, each switching on the next. In the response the last molecules do something: an enzyme starts work, a channel opens, a gene is read. The whole chain is a signal transduction pathway, and it links what the receptor senses to what the cell does.

Most relay molecules are proteins, and the commonest way to switch one on or off is to change it slightly: protein modification. The usual change is a phosphate group. A protein kinase takes the end phosphate from ATP and adds it to an amino acid of its target. The new negative charges change how the target folds, and so what it does. Often the target is itself a kinase, so kinase switches on kinase in a phosphorylation cascade, each one acting on many of the next.

What does a protein kinase do to the protein it acts on?

Switching off matters as much. A protein phosphatase takes the phosphate off again, so each relay goes back to rest once the signal stops. The cell responds while the ligand is there, and stops when it goes.

Remember it The three stages: ring, tell, run

  • RingReceptionthe ligand rings the doorbell
  • TellTransductionthe message is passed inside
  • RunResponsethe cell acts on it
  • Reception, transduction, response.
  • Kinases add phosphate from ATP; phosphatases take it off.
  • A cascade: each kinase switches on many of the next.
Watch out The phosphate a kinase adds is a switch, not fuel. It changes the shape of the protein it is put on; the cell is not storing energy there.
the cell respondsOUTSIDE THE CELLINSIDE THE CELLplasma membraneligandreceptor, switched onrelay molecules3 onmore9 on
  1. The ligand arrives at its receptor in the plasma membrane.
  2. It binds, and the receptor changes shape: it is switched on.
  3. The receptor activates several relay molecules inside the cell.
  4. Each of those activates several more: the signal is amplified.
  5. The pathway ends in a response by the cell.

4.2.B G protein-coupled receptors

A receptor that wakes a G protein

  • The G protein-coupled receptor (GPCR), the biggest family of receptors in eukaryotes, is one protein chain that crosses the membrane seven times.
  • Inside it meets a G protein of three parts (alpha, beta and gamma), held to the inner face of the membrane.
  • The G protein is off with GDP, on with GTP: the ligand-bound receptor makes it swap.
  • The active alpha part switches on an enzyme, often adenylyl cyclase.

The detail

  • The GPCR’s ligand-binding domain is outside the cell.
  • About 800 human genes code for GPCRs, among them the receptors for epinephrine, many neurotransmitters, smells and light.

Switching on and off

  • When a ligand binds, the receptor’s intracellular domain changes shape.
  • The changed receptor makes the G protein let go of its GDP and pick up a GTP in its place.
  • With GTP bound, the alpha part leaves beta and gamma and slides along the membrane to the enzyme.
  • The G protein is a timer: its alpha part slowly breaks its own GTP down to GDP, then lets go of the enzyme and rejoins beta and gamma, off again.
  • While the ligand is still bound, the receptor switches it straight back on.

Watch out

  • GDP does not become GTP. The G protein gives up a GDP and takes a new GTP.
  • Only when it switches off does it break that GTP back down to GDP.

The biggest family of receptors in eukaryotes is the G protein-coupled receptor (GPCR). It is one protein chain that weaves through the membrane seven times, its ligand-binding domain outside. On the inside it meets a G protein, made of three parts (alpha, beta and gamma) held to the inner face of the membrane. About 800 human genes code for GPCRs, among them the receptors for epinephrine, many neurotransmitters, smells and light.

At rest the G protein holds a molecule of GDP and is off. When a ligand binds, the receptor's intracellular domain changes shape, and the changed receptor makes the G protein let go of its GDP and pick up a GTP in its place. With GTP bound, the alpha part leaves beta and gamma, slides along the membrane to an enzyme, often adenylyl cyclase, and switches it on.

Epinephrine binds its receptor. Which event switches the G protein on?

The G protein is a timer. Its alpha part slowly breaks its own GTP down to GDP, and when it does, it lets go of the enzyme and rejoins beta and gamma, off again. While the ligand is still bound, the receptor switches it straight back on.

  • A GPCR crosses the membrane seven times.
  • G protein: off with GDP, on with GTP; the receptor makes it swap.
  • The active G protein switches on adenylyl cyclase.
Watch out GDP does not become GTP. The G protein gives up a GDP and takes a new GTP. Only when it switches off does it break that GTP back down to GDP.
OUTSIDE THE CELLCYTOPLASMreceptorligandenzymeenzymeswitched onmembraneG proteinGDPGTPGDP leavesG protein on, with GTPsecond messenger(cyclic AMP)ATP
  1. A ligand approaches the receptor. The G protein beside it holds GDP and is off.
  2. The ligand binds. The receptor changes shape and is on.
  3. The G protein swaps GDP for GTP. It is now on.
  4. It switches on an enzyme, which makes a second messenger.

4.2.A 4.2.B Epinephrine, cAMP and the cascade

One hormone, millions of glucose

  • The example the AP course names: epinephrine telling a liver cell to break down glycogen.
  • Epinephrine binds a GPCR; the G protein switches on adenylyl cyclase, which turns ATP into cyclic AMP (cAMP).
  • cAMP is a second messenger: a small molecule the cell makes once the receptor is active, which spreads through the cytoplasm and carries the message on.
  • cAMP switches on protein kinase A, which starts the cascade that ends with glycogen broken down to glucose.
  • Each enzyme acts on many molecules, so the signal is amplified at every step.

The detail

  • Epinephrine is the first messenger, and it never enters the cell.
  • One adenylyl cyclase makes many cAMP; each kinase phosphorylates many of the next.
  • So a few molecules of epinephrine outside release millions of glucose molecules inside, in seconds.
  • Then it stops: when epinephrine leaves, the G protein breaks its GTP down, phosphodiesterase turns cAMP into AMP, and phosphatases take the phosphates off. The end of the film shows it.

The pathway, step by step

  • A fright makes the adrenal glands release epinephrine into the blood, and within seconds it reaches the liver.
  • Epinephrine binds a GPCR on a liver cell. That is reception.
  • The receptor changes shape inside, and the G protein swaps GDP for GTP.
  • The G protein switches on adenylyl cyclase, which turns ATP into cAMP, again and again.
  • cAMP binds protein kinase A and sets its active parts free.
  • Protein kinase A phosphorylates phosphorylase kinase, which phosphorylates glycogen phosphorylase: the cascade.
  • Glycogen phosphorylase breaks glycogen down, and glucose leaves the cell for the blood. That is the response.

On the exam

  • A free-response question often gives a pathway as a diagram, with unfamiliar names.
  • Find the receptor, the second messenger and the last enzyme, and say which arrow is amplification.
  • The names change; the pattern does not.

Watch out

  • cAMP is not the hormone, nor a piece of it. The cell makes cAMP from its own ATP after the hormone binds outside.

Here is one pathway from start to finish, the example the AP course names: epinephrine telling a liver cell to break down glycogen. A fright makes the adrenal glands release epinephrine into the blood, and within seconds it reaches the liver.

  1. Epinephrine binds a GPCR on a liver cell. That is reception.
  2. The receptor changes shape inside, and the G protein swaps GDP for GTP.
  3. The G protein switches on adenylyl cyclase, which turns ATP into cyclic AMP (cAMP), again and again.
  4. cAMP binds protein kinase A and sets its active parts free.
  5. Protein kinase A phosphorylates phosphorylase kinase, which phosphorylates glycogen phosphorylase: the cascade.
  6. Glycogen phosphorylase breaks glycogen down, and glucose leaves the cell for the blood. That is the response.

cAMP is a second messenger: a small molecule the cell makes once the receptor is active, which spreads through the cytoplasm and carries the message on. Epinephrine is the first messenger, and it never enters the cell.

Each enzyme in the chain acts on many molecules, not one. One adenylyl cyclase makes many cAMP; each kinase phosphorylates many of the next. The signal is amplified at every step, so a few molecules of epinephrine outside release millions of glucose molecules inside, in seconds. Then it stops: when epinephrine leaves, the G protein breaks its GTP down, phosphodiesterase turns cAMP into AMP, and phosphatases take the phosphates off. The end of the film shows it.

Epinephrine switches on 10 receptors on a liver cell. If every active molecule in the pathway then switches on 10 of the next, about how many molecules are active three steps on?

Remember it The epinephrine pathway in order: Real Gamers Always Collect Keys

  • RealReceptorepinephrine binds outside
  • GamersG proteinswaps GDP for GTP
  • AlwaysAdenylyl cyclaseturns ATP into cAMP
  • CollectcAMPthe second messenger
  • KeysKinasesthe cascade, then glycogen to glucose
  • cAMP is the second messenger; epinephrine is the first and stays outside.
  • Each step multiplies the signal: amplification.
  • Phosphodiesterase and phosphatases switch the pathway off.
Watch out cAMP is not the hormone, nor a piece of it. The cell makes cAMP from its own ATP after the hormone binds outside.
On the exam A free-response question often gives a pathway as a diagram, with unfamiliar names. Find the receptor, the second messenger and the last enzyme, and say which arrow is amplification. The names change; the pattern does not.
A liver cell responding to epinephrine: reception at the receptor, transduction through the G protein, cAMP and the kinase cascade, the response as glycogen is broken down, and then the pathway switching off.

4.2.B Ligand-gated ion channels

A receptor that is a gate

  • A ligand-gated ion channel is a receptor and a channel in one protein.
  • When its ligand binds, the protein changes shape and the channel opens or closes, letting ions through or stopping them.
  • At a nerve and muscle junction, acetylcholine opens channels; Na+ rushes in and the membrane depolarizes.
  • No second messenger, no cascade: the fastest response of all, a change in voltage within a millisecond.

The detail

  • The fastest pathway is hardly a pathway at all.
  • Not every ligand-gated channel opens on binding. In the rod cells of your eye, channels stay open while cGMP is bound to them and close when light makes the cell break its cGMP down.

Nerve to muscle

  • Where a motor neuron meets a muscle fiber, the neuron releases acetylcholine.
  • It crosses the cleft and binds acetylcholine receptors in the fiber’s membrane.
  • Each receptor’s channel opens, and positive ions, mostly Na+, rush in down their gradient.
  • The inside of the fiber, about −70 mV at rest, becomes less negative.
  • A big enough change starts an impulse along the fiber, and it contracts.
  • An enzyme in the cleft breaks the acetylcholine down within milliseconds, so the channels close until the next signal.

Examples

  • Nicotine fits the acetylcholine receptor too (the receptor is called nicotinic for that reason) and opens it in the brain, which is part of why nicotine is addictive.
  • The cancers smoking causes come from other chemicals in the smoke, the carcinogens in its tar, not from nicotine.

The fastest pathway is hardly a pathway at all. A ligand-gated ion channel is a receptor and a channel in one protein. When its ligand binds, the protein changes shape and the channel opens or closes, letting ions through or stopping them.

Where a motor neuron meets a muscle fiber, the neuron releases acetylcholine. It crosses the cleft and binds acetylcholine receptors in the fiber's membrane. Each receptor's channel opens, and positive ions, mostly Na+, rush in down their gradient. The inside of the fiber, about −70 mV at rest, becomes less negative: it depolarizes. A big enough change starts an impulse along the fiber, and it contracts. An enzyme in the cleft breaks the acetylcholine down within milliseconds, so the channels close until the next signal.

Acetylcholine opens the channels and positive ions flow into the muscle fiber. What happens to the voltage across its membrane?

No second messenger, no cascade: the response is a change in voltage, within a millisecond. Not every ligand-gated channel opens on binding. In the rod cells of your eye, channels stay open while cGMP is bound to them and close when light makes the cell break its cGMP down.

  • Receptor and channel in one protein: binding opens or closes it.
  • Acetylcholine opens channels; Na+ in; the membrane depolarizes.
  • The fastest response of all, with no second messenger.
Example Nicotine fits the acetylcholine receptor too (the receptor is called nicotinic for that reason) and opens it in the brain, which is part of why nicotine is addictive. The cancers smoking causes come from other chemicals in the smoke, the carcinogens in its tar, not from nicotine.
SYNAPTIC CLEFTINSIDE THE CELLclosed channelopen channelAChACh boundsodium ions inthreshold−70 mVmembranepotentialtimeless negativedepolarization
  1. At rest the channel is closed and the inside is about −70 mV.
  2. Acetylcholine from the presynaptic neuron binds the receptor.
  3. The receptor changes shape and the channel opens.
  4. Positive ions diffuse in, down their gradient. The potential climbs.
  5. The inside is less negative: the membrane has depolarized, and may reach the threshold.

4.2.B 4.3.A Receptor tyrosine kinases and intracellular receptors

Kinase receptors, and receptors inside

  • A receptor tyrosine kinase spans the membrane and its intracellular domain is a kinase. Insulin is the example.
  • Insulin’s pathway ends in muscle and fat cells with glucose transporters (GLUT4) moved to the plasma membrane, so glucose floods in and blood glucose falls.
  • Steroids such as testosterone and estrogen cross the membrane and bind an intracellular receptor in the cytoplasm or nucleus.
  • Hormone and receptor together bind DNA beside target genes and change how much they are transcribed: slow, but lasting.

The detail

  • Two more kinds of receptor cover most of the rest.
  • Steroid hormones need no relay at the membrane. Testosterone and estrogen are lipids made from cholesterol, so they diffuse through the bilayer.
  • The DNA sequences the hormone and receptor bind are specific. The cell makes more of some proteins and less of others.
  • Thyroid hormones also act through receptors in the nucleus.
  • Timing: epinephrine and insulin change proteins that are already there, in seconds to minutes. A steroid has the cell make new ones, which takes hours, but the change lasts.

Insulin, step by step

  • Insulin is released by the beta cells of the pancreas when blood glucose rises, and binds receptors on liver, muscle and fat cells.
  • Binding changes the receptor’s shape, and its kinase domains add phosphates to tyrosines on the receptor itself.
  • Relay proteins bind the phosphorylated tyrosines and start a cascade.
  • In muscle and fat cells it ends with vesicles carrying GLUT4 fusing with the plasma membrane.

Watch out

  • A question will tell you whether a ligand is hydrophobic or hydrophilic. Use it: hydrophobic crosses the membrane to a receptor inside; hydrophilic or large stays out, with its receptor in the membrane.

Two more kinds of receptor cover most of the rest. A receptor tyrosine kinase spans the membrane and its intracellular domain is a kinase. Insulin is the example. Released by the beta cells of the pancreas when blood glucose rises, it binds receptors on liver, muscle and fat cells. Binding changes the receptor's shape, and its kinase domains add phosphates to tyrosines on the receptor itself. Relay proteins bind the phosphorylated tyrosines and start a cascade. In muscle and fat cells it ends with vesicles carrying glucose transporters (GLUT4) fusing with the plasma membrane, so glucose floods in and blood glucose falls.

Steroid hormones need no relay at the membrane. Testosterone and estrogen are lipids made from cholesterol: they diffuse through the bilayer and bind an intracellular receptor in the cytoplasm or nucleus. Hormone and receptor together bind specific DNA sequences beside their target genes and change how much those genes are transcribed. The cell makes more of some proteins and less of others. Thyroid hormones also act through receptors in the nucleus.

A cell is treated with a drug that stops transcription. Which of its responses is lost?

Compare the timing. Epinephrine and insulin change proteins that are already there, in seconds to minutes. A steroid has the cell make new ones, which takes hours, but the change lasts.

  • Insulin: a receptor tyrosine kinase; ends with GLUT4 moved to the membrane.
  • Steroids cross the membrane and bind intracellular receptors.
  • The hormone and receptor change gene expression: slow, but lasting.
Watch out A question will tell you whether a ligand is hydrophobic or hydrophilic. Use it: hydrophobic crosses the membrane to a receptor inside; hydrophilic or large stays out, with its receptor in the membrane.
FROM THE BLOODCYTOPLASMinsulininsulin receptorphosphate on tyrosinerelay proteinsvesicle with GLUT4GLUT4glucose in
  1. Insulin from the blood reaches its receptor.
  2. It binds, and the receptor changes shape.
  3. The enzyme part of the receptor adds phosphate to tyrosine.
  4. The phosphorylated receptor switches on relay proteins.
  5. Vesicles carrying glucose transporters move toward the membrane.
  6. They fuse with it. Glucose now enters the cell faster.
geneDNAnucleusCYTOPLASMplasma membranesteroid hormonecrosses the bilayerreceptoractive receptorinto the nucleusbinds a specificDNA sequencemRNAribosomenew protein
  1. A steroid hormone is lipid-soluble.
  2. It diffuses through the phospholipid bilayer into the cell.
  3. It binds an intracellular receptor, which becomes active.
  4. The complex moves into the nucleus.
  5. It binds a specific DNA sequence and promotes transcription of the gene.
  6. The mRNA leaves the nucleus and is translated into a new protein.

4.3.A Responses to signals

What a signal makes a cell do

  • Signal transduction is how a cell responds to its environment, inside the body or out: that is what starts a pathway.
  • Some pathways end at transcription factors and change gene expression, so the cell makes new proteins: slow, but it lasts.
  • Others change cell function: proteins the cell already has, so an enzyme starts or a channel opens. Fast, and over when the signal stops.
  • Across many cells, either kind can change the phenotype. A signal can even end a cell’s life by apoptosis, programmed cell death.

The detail

  • The signal might come from the body around the cell (a hormone, a neighbor’s surface), from other cells of its own kind (a mating factor, an autoinducer), or from outside the organism (a gas, light, the smell of food).
  • Whatever starts it, the pathway ends in one of a few kinds of response: gene expression, cell function (and division), phenotype, apoptosis.
  • Phenotype changes: the fruit softens, an embryo grows testes.
  • Apoptosis shapes a body as much as growth does.
  • The same signal can do different things in different cells, depending on their receptors and pathways.
  • Tap each response in the figure for an example.

Examples

  • In ripening fruit the gas ethylene switches on the genes for enzymes that soften the cell walls and turn starch to sugar.
  • Ripe fruit makes more ethylene, so one ripe banana in a bag ripens the rest.

Signal transduction is how a cell responds to its environment. The signal might come from the body around it (a hormone, a neighbor's surface), from other cells of its own kind (a mating factor, an autoinducer), or from outside the organism (a gas, light, the smell of food). Whatever starts it, the pathway ends in one of a few kinds of response.

Most change either gene expression or cell function. Some pathways end at transcription factors and change which genes are read, so the cell makes new proteins: slow, but it lasts. In ripening fruit the gas ethylene switches on the genes for enzymes that soften the cell walls and turn starch to sugar, and ripe fruit makes more ethylene, so one ripe banana in a bag ripens the rest. Other pathways change proteins the cell already has, so an enzyme starts or a channel opens: fast, and over when the signal stops.

Gibberellin, a plant hormone, reaches cells in a germinating barley seed. Within hours they are making amylase, which they were not making before. What kind of response is this?

Across many cells, either kind can change the phenotype: the fruit softens, an embryo grows testes. A signal can even end a cell's life by apoptosis, programmed cell death, which shapes a body as much as growth does. Tap each response in the figure for an example.

  • The environment, inside the body or out, is what starts a pathway.
  • Responses: gene expression, cell function (and division), phenotype, apoptosis.
  • The same signal can do different things in different cells, depending on their receptors and pathways.
a signaltarget cellone of fiveresponsesGene expressionyeast mating factorsCell functionDictyostelium and cAMPCell divisioncytokines from T cellsPhenotypeSRY and HOX genesApoptosisshaping the fingers

Tap a kind of response to read an example.

4.3.B Changes in signal transduction pathways

When a pathway breaks

  • Each step depends on the one before, so a change anywhere shows up in every step after it.
  • A mutation in any domain of the receptor, or in any relay protein, changes the pathway downstream.
  • Chemicals can activate or inhibit a part of the pathway: stuck on or stuck off.
  • A cell with no working receptor does not respond, however much ligand there is.

The detail

  • A mutation in the ligand-binding domain can stop the ligand binding.
  • One in the intracellular domain can stop the receptor passing the message on, or leave it switched on with no ligand at all.
  • A change to any relay protein does the same further down.

On the exam

  • A question shows a pathway and changes one part: a mutated receptor, a drug, a toxin.
  • For every change, ask two questions. Is this part now stuck off, or stuck on? And what does every step after it do as a result?
  • Find that part, decide which, then follow every arrow after it to the response.
  • Parts above the change carry on as normal.

Try it

  • Make each prediction below, then set the film’s Fault to that change and watch.

Each step depends on the one before, so a change anywhere shows up in every step after it. A mutation in the ligand-binding domain can stop the ligand binding; one in the intracellular domain can stop the receptor passing the message on, or leave it switched on with no ligand at all. A change to any relay protein does the same further down. A chemical can do it too: some activate a part of the pathway, others inhibit it.

For every change, ask two questions. Is this part now stuck off, or stuck on? And what does every step after it do as a result? Make each prediction below, then set the film's Fault to that change and watch.

A beta blocker fits the binding site of the epinephrine receptor but does not change the receptor's shape. Epinephrine arrives. What happens to the cAMP in the cell?

Cholera toxin changes the G protein so that it can no longer break down its GTP. What happens after the ligand leaves the receptor?

At high doses, caffeine inhibits phosphodiesterase. What does it do to a cell's response to epinephrine?

A mutation stops the phosphatase that takes the phosphate off glycogen phosphorylase. Epinephrine comes and then goes. What happens?

Remember it The on and off switch: a Kinase Kicks the phosphate on, a Phosphatase Peels it off

  • KicksKinaseadds a phosphate from ATP
  • PeelsPhosphatasetakes the phosphate off
  • A mutation in any domain of the receptor, or in any relay, changes every step after it.
  • Chemicals can activate or inhibit a pathway: stuck on or stuck off.
  • A cell with no working receptor does not respond, however much ligand there is.
On the exam A question shows a pathway and changes one part: a mutated receptor, a drug, a toxin. Find that part, decide whether it is stuck on or stuck off, then follow every arrow after it to the response. Parts above the change carry on as normal.
The epinephrine pathway with a Fault switch. Make each prediction first, then choose the fault and watch what happens after the signal has gone.

02Dry lab: Dose and response

A liver cell's response grows with the share of its receptors that a ligand fills. Test epinephrine, a look-alike and a beta blocker over six concentrations, with a full or a half set of receptors, and see how the curve moves.

cAMP· · ·PLATE READEREpinephrine100 nMall receptorsOUTSIDECYTOPLASMcAMP
The bench: cells with receptors for epinephrine, six dilutions of the ligand, and a plate reader that measures the cAMP the cells make.
Your questionHow does a cell's response depend on the concentration of a ligand, and how do a look-alike ligand, a blocker or fewer receptors change it?
What you can changeThe ligand (epinephrine, a look-alike, or epinephrine with a beta blocker) and the number of receptors (normal or half). The six concentrations are fixed, from 0.1 to 10 000 nM, so that curves can be compared.
What to recordFor each test, the response at each concentration, the concentration that gives half the maximum response, and the maximum. Repeat a test to see the measurement scatter. Download the CSV to plot your own graph on a log scale.

Find out

  • How does the response depend on concentration? Run epinephrine at all six concentrations, from 0.1 to 10 000 nM. Where does the curve climb fastest, and where does it level off?
  • What does the half-way point tell you? Read off the concentration that gives half the maximum response. The lower it is, the more tightly the ligand binds.
  • What does a look-alike do? Run the look-alike ligand, then epinephrine with the beta blocker. Both fit the receptor. Which curve moves to the right, and what does that say about how much ligand is needed?
  • What if there are fewer receptors? Switch to half the receptors and run epinephrine again. Does the half-way point change, or the maximum, or both?

Record

  • For each test: the ligand, the receptor number and the six readings in the table.
  • The concentration that gives half the maximum response, and the largest response, for each test.
  • A repeat of one test, to judge how much of a difference between two curves could be measurement error.
  • Download the CSV and plot your own graph. Why is the concentration axis a log scale?

You raise epinephrine from 1000 nM to 10 000 nM. What happens to the response?

Half the receptors are removed. Which part of the epinephrine curve changes?

With the beta blocker present, the epinephrine curve moves right but still climbs high. Why?

Back to signaling

A liver cell has a fixed number of epinephrine receptors. Use your curves to explain why its response levels off, and what halving the receptors does to the curve.

03Check

A fresh paper from the exam bank on this guide's topics each time: past-paper style questions, marked as you go, and saved to your Exam practice progress when you are signed in.

Exam practice

Exam questions on 4.1 to 4.3, marked

Start 15 marks of exam questionsYour exam practice

Quiz: cell communicationQuiz: signal transduction pathwaysUnit 4 escape roomUnit 4 pub quizUnit 4 practice questions

04Downloads

Take the guide with you, or into a classroom with no internet.

05Teacher resources

The guide as three one-hour lessons. Each has a plan to print (the timings, what to project and where to stop, the activities with what they need, what students get wrong) and slides to teach it from, in the same order, with the teacher's moves in the notes.

LessonCoversFocusChaptersLesson planSlides
1Who is listening, and how far away 4.1.A, 4.1.B60 min Signaling by contact, by local regulators and by hormones, sorted by distance, then quorum sensing in bacteria 1, 2, 3 Lesson planPDF 695 KB SlidesPPTX 9.2 MB
2Reception and transduction 4.2.A, 4.2.B60 min Ligands and receptors, reception, transduction and response, the G protein, cAMP and the kinase cascade, acted out and then filmed, with channels and steroid receptors 4, 5, 6, 7, 8, 9 Teacher pass: Lesson planPDF 765 KB Teacher pass: SlidesPPTX 6.9 MB
3Responses, and when a pathway breaks 4.3.A, 4.3.B60 min The kinds of response a pathway ends in, the dose and response bench, and predicting what a mutation, a drug or a toxin does to a pathway 10, 11, dry lab Teacher pass: Lesson planPDF 674 KB Teacher pass: SlidesPPTX 4.1 MB

Lesson 1 is free with a free account. The other plans and slides, for every guide, come with the Teacher pass.

The note template, the revision sheet and the offline copy are in Downloads, for you and the class.

PRACTICE AND REVIEW

Make it for your class, or set it

Build for your class

Already on the site for Unit 4

Card sets on splycr

Open a set to host it as a class game, or make a copy to edit.

How this was made. The course structure, the activities and the teaching choices come from my own classroom, my presentations and my years of teaching IB and AP Biology. I use Claude, an AI, to help write and build the interactive guides, lesson plans, slides and practice questions, and to draw the diagrams and code the interactives. I direct the work and review it against the IB and AP specifications before it goes live. Sources and acknowledgements.