Biology  by Bradford
support
IB BIOLOGY · THEME B · FORM AND FUNCTION

What gets through a membrane?

A film of fat two molecules thick keeps a cell's contents in and the rest of the world out, yet lets through exactly what the cell needs. Find out how the bilayer works as a barrier, which molecules slip across it, how channel and pump proteins pick what crosses, and at higher level how fluidity, vesicles, gated channels and the sodium-potassium pump work.

IB Biology B2.1SL and HL4 hours SL, 2 more HL11 chapters6 chapters at SLdry lab

Start learningRun the dry labTeach it

Four kinds of particle meet the same bilayer. Watch which slip straight through, which cross only now and then, and which bounce off every time.
NavigationBy the end you cantap a goal to go to its chapter

01Learn

Eleven chapters, the last five for higher level. Read one, play its figure or film, and make each prediction before you open the answer.

NavigationChapterstap a chapter to jump to it
  1. 1A skin that builds itself
  2. 2A wall with gaps for small things
  3. 3Proteins in it and on it
  4. 4Water's own door
  5. 5Channels open, pumps push
  6. 6A fluid mosaic
  7. 7Not too stiff, not too runny HL
  8. 8Pinching off, joining up HL
  9. 9Gates and a pump in every neuron HL
  10. 10Glucose hitches a ride HL
  11. 11Holding tissues together HL

B2.1.1 Lipid bilayers as the basis of cell membranes

A skin that builds itself

  • A phospholipid is amphipathic: a hydrophilic phosphate head and two hydrophobic fatty acid tails.
  • In water, phospholipids form a lipid bilayer by themselves: heads face the water, tails face each other.
  • The bilayer is continuous: it closes on itself so no tails are left touching water.
  • Every membrane in a cell, outside and in, is built on a lipid bilayer.

The detail

  • The phosphate head is attracted to water; the two fatty acid tails are not.
  • The bilayer is a sheet two molecules thick.
  • Nothing has to build it. Water molecules bond to each other and to the heads, and the tails are pushed together because water does not bond to them.
  • A bilayer with a free edge would leave tails touching water, so the sheet closes up into a continuous layer with no edges.

Watch out

  • The tails are not “attracted to each other” by a special bond. They end up together because the water holds itself together and squeezes them out.

A phospholipid has a phosphate head that is attracted to water and two fatty acid tails that are not. A molecule with a hydrophilic part and a hydrophobic part is amphipathic. In water, phospholipids arrange themselves so that the heads face the water and the tails face each other, away from it. The result is a sheet two molecules thick: a lipid bilayer.

Nothing has to build it. The water molecules bond to each other and to the heads, and the tails are pushed together because water does not bond to them. A bilayer with a free edge would leave tails touching water, so the sheet closes on itself into a continuous layer with no edges. Every membrane in a cell, outside and in, is built on one.

  • Phospholipids are amphipathic: hydrophilic head, hydrophobic tails.
  • In water they form a bilayer by themselves: heads out, tails in.
  • The bilayer is continuous: it closes up so no tails are left exposed.
Watch out The tails are not "attracted to each other" by a special bond. They end up together because the water holds itself together and squeezes them out.

Phospholipids are shaken in oil instead of water. How would they arrange themselves?

Nothing places the molecules: watch where the tails end up, then turn the labels off and say what each part is.

B2.1.2 Lipid bilayers as barriers B2.1.3 Simple diffusion across membranes

A wall with gaps for small things

  • The bilayer’s core of hydrocarbon tails is hydrophobic, so it has low permeability to ions, polar molecules and large molecules.
  • So the membrane is an effective barrier between the watery cytoplasm and the watery fluid outside.
  • Small uncharged molecules such as O2 and CO2 slip between the phospholipids by simple diffusion.
  • Simple diffusion is passive: net movement goes down the concentration gradient and the cell spends no energy.

The detail

  • Ions and polar molecules are surrounded by shells of water and attracted to it. To cross they would have to leave the water and pass through the oily core, so very few do.
  • Large molecules are too big to slip between the phospholipids at all.
  • Oxygen and carbon dioxide slip between the moving phospholipids and through the core.
  • Random movement carries more molecules from the side where they are more concentrated, so the net movement is down the gradient.
  • In a respiring cell oxygen is used up inside, so it keeps diffusing in. Carbon dioxide is made inside, so it keeps diffusing out.

Examples

  • You have met diffusion with your nose: when somebody in a room lets one go, the person beside them smells it first and the far corner last.
  • The particles spread from where they are crowded to where they are few, with nobody pushing them. The first film shows it.

Watch out

  • Small size alone does not get a particle through. A sodium ion is smaller than an oxygen molecule but carries a charge, so the bilayer keeps it out.

The middle of a bilayer is a layer of hydrocarbon tails, and that core is hydrophobic. Ions and polar molecules are surrounded by shells of water and attracted to it; to cross they would have to leave the water and pass through the oily core, so very few do. Large molecules are too big to slip between the phospholipids at all. The bilayer has a low permeability to all of these, so it is an effective barrier between the watery cytoplasm and the watery fluid outside.

Small molecules that carry no charge are different. Oxygen and carbon dioxide slip between the moving phospholipids and through the core. They cross by simple diffusion: random movement carries more of them from the side where they are more concentrated, so the net movement is down the concentration gradient. The cell spends no energy on it. In a respiring cell oxygen is used up inside, so it keeps diffusing in, and carbon dioxide is made inside, so it keeps diffusing out.

You have met diffusion with your nose. When somebody in a room lets one go, the person beside them smells it first and the far corner last: the particles spread from where they are crowded to where they are few, with nobody pushing them. The first film shows it.

  • The hydrophobic core keeps out ions, polar molecules and large molecules.
  • Small non-polar molecules such as O2 and CO2 cross by simple diffusion.
  • Simple diffusion is passive and goes down the concentration gradient.
Watch out Small size alone does not get a particle through. A sodium ion is smaller than an oxygen molecule but carries a charge, so the bilayer keeps it out.

Rank these from fastest to slowest across a bare bilayer: oxygen, glucose, sodium ions.

oxygencarbon dioxidewaterslowlyNa⁺K⁺ionin its shell of waterglucoseOUTSIDECYTOPLASM
  1. Oxygen diffuses in and carbon dioxide out, between the phospholipids.
  2. Water is polar but small: a little crosses the bilayer, slowly.
  3. Ions and polar molecules such as glucose cannot pass the hydrophobic core.
Diffusion in a classroom: the gas starts crowded in one place and spreads by random motion, so the nearest nose smells it first.
Oxygen, sodium ions and proteins start crowded on one side. Watch which cross between the phospholipids, which need a channel, and which cannot cross at all.

B2.1.4 Integral and peripheral proteins in membranes

Proteins in it and on it

  • Most of what a membrane does is done by its proteins, which vary in structure, position and function.
  • Integral proteins are embedded in one or both layers, with a hydrophobic part among the tails holding them in place.
  • Peripheral proteins are not embedded: they are attached to the inner or outer surface.

The detail

  • A bilayer alone would let almost nothing useful through.
  • Membrane proteins sort into two groups by where they sit.
  • Some integral proteins cross the bilayer completely and have parts in the water on both sides, as channels and pumps do. Others sit in one layer only.
  • Peripheral proteins are attached to the heads or to an integral protein, and are easier to remove.
  • Their jobs include enzymes, receptors, and anchoring the membrane to the cytoskeleton.

Watch out

  • “Integral” does not mean “crosses the whole membrane”. A protein in only one layer is still integral if part of it is among the tails.

A bilayer alone would let almost nothing useful through. Most of what a membrane does is done by the proteins in it, and they come in many shapes, places and jobs. They sort into two groups by where they sit.

Integral proteins are embedded in the bilayer. Some cross it completely and have parts in the water on both sides, as channels and pumps do; others sit in one layer only. The part among the tails is hydrophobic, which holds the protein in place. Peripheral proteins are not embedded at all. They are attached to the inner or outer surface, to the heads or to an integral protein, and are easier to remove. Their jobs include enzymes, receptors, and anchoring the membrane to the cytoskeleton.

  • Integral: embedded in one or both layers, with a hydrophobic part among the tails.
  • Peripheral: attached to one surface, not embedded.
  • Membrane proteins vary in structure, position and function.
Watch out "Integral" does not mean "crosses the whole membrane". A protein in only one layer is still integral if part of it is among the tails.

A protein is removed from a membrane only by a detergent that breaks up the bilayer. What kind is it most likely to be?

integralperipheralOUTSIDECYTOPLASM

Tap a protein to see where it sits and what kind it is.

B2.1.5 Movement of water molecules across membranes by osmosis and the role of aquaporins

Water's own door

  • Osmosis: the net movement of water towards the higher solute concentration.
  • It happens because water molecules move at random and the membrane lets water through but holds back most solutes.
  • Aquaporins are integral proteins with a narrow hydrophilic pore: water passes much faster, in single file, and ions are kept out.

The detail

  • Water molecules cross a membrane in both directions all the time.
  • When the solute concentration differs on the two sides, the movement is uneven: on the more concentrated side more water molecules are held round solute particles and fewer are free to cross back.
  • Being small, water can squeeze between phospholipids, but being polar, it does so slowly.
  • Billions of water molecules a second pass through each aquaporin. Ions are kept out by the pore’s size and charges.

Examples

  • Cells that move a lot of water, such as those in the kidney’s collecting ducts and in plant roots, have many aquaporins.

Watch out

  • Aquaporins do not pump water. Water goes through them by osmosis, in whichever direction the solute concentrations decide.

Water molecules move at random and cross a membrane in both directions all the time. A membrane lets water through but not most solutes, so when the solute concentration differs on the two sides, the movement is uneven. On the more concentrated side more water molecules are held round solute particles and fewer are free to cross back. So there is a net movement of water towards the higher solute concentration: osmosis.

Being small, water can squeeze between phospholipids, but being polar, it does so slowly. Many cells have aquaporins: integral proteins with a narrow pore lined with hydrophilic groups. Water passes through in single file, billions of molecules a second through each one, while ions are kept out by the pore's size and charges. Cells that move a lot of water, such as those in the kidney's collecting ducts and in plant roots, have many aquaporins.

  • Osmosis: net water movement towards the higher solute concentration.
  • It happens because water moves at random and the membrane holds back the solute.
  • Aquaporins let water through much faster, in single file, and keep ions out.
Watch out Aquaporins do not pump water. Water goes through them by osmosis, in whichever direction the solute concentrations decide.

A drug blocks the aquaporins in a cell placed in pure water. What happens?

between lipidsslowlyaquaporinsingle filebillions a secondnet flow inOUTSIDECYTOPLASM
  1. A water molecule squeezes between the phospholipids: it crosses, but slowly.
  2. Through an aquaporin, water passes in single file, very fast.
  3. With more solute inside, more water enters than leaves: net flow in.

B2.1.6 Channel proteins for facilitated diffusion B2.1.7 Pump proteins for active transport B2.1.8 Selectivity in membrane permeability

Channels open, pumps push

  • A channel protein is a gated pore for one kind of ion: open, ions diffuse through down their gradient; shut, none pass.
  • That is facilitated diffusion: passive and down the gradient, but only for particles that fit.
  • A pump protein uses energy from ATP to move specific particles from low to high concentration: active transport.
  • Channels and pumps make a membrane selectively permeable; simple diffusion is not selective and depends only on size and polarity.

The detail

  • A channel’s pore runs through its middle and is lined with hydrophilic groups.
  • Its width and the charges on its lining let through one kind of ion only: a sodium channel passes sodium ions but not potassium.
  • Many channels have a gate.
  • A pump binds a specific particle on one side, uses energy from ATP to change shape, and releases the particle on the other side.
  • In simple diffusion, whatever is small and non-polar enough gets through.

Watch out

  • Facilitated diffusion uses a protein but no energy. “Uses a protein” does not mean “active”.

A channel protein has a pore through its middle, lined with hydrophilic groups. Its width and the charges on its lining let through one kind of ion only: a sodium channel passes sodium ions but not potassium. Many channels have a gate. When it is open, ions diffuse through, down their concentration gradient; when it is shut, none pass. This is facilitated diffusion: still passive, still down the gradient, but only for the particles that fit.

A pump protein moves particles the other way, from low to high concentration. It binds a specific particle on one side, uses energy from ATP to change shape, and releases the particle on the other side. That is active transport. Because channels and pumps each handle particular particles, they make the membrane selectively permeable. Simple diffusion is not selective at all: whatever is small and non-polar enough gets through.

  • Channel: a gated pore for one kind of ion; facilitated diffusion, passive.
  • Pump: uses ATP, can move particles against the gradient; active transport.
  • Proteins make a membrane selective; simple diffusion depends only on size and polarity.
Watch out Facilitated diffusion uses a protein but no energy. "Uses a protein" does not mean "active".

A poison stops ATP being made in a cell. Which movement stops first?

Remember it Down needs no ATP

  • DownDiffusionhigh to low concentration: simple or through a channel, no ATP
  • UpPumplow to high concentration: active transport, ATP every time
gate shutdown the gradientno energy usedATPsupplies energyagainstthe gradientOUTSIDECYTOPLASM
Oxygen, sodium ions and glucose, and a pump, side by side on one membrane. Watch which crossings go downhill for free and which one goes uphill and costs ATP.

B2.1.9 Structure and function of glycoproteins and glycolipids B2.1.10 Fluid mosaic model of membrane structure

A fluid mosaic

  • A glycoprotein is a protein with short branched sugar chains attached; a glycolipid is a lipid with them.
  • The sugars are always on the outer side of the plasma membrane, and work in cell recognition and cell adhesion.
  • Fluid mosaic model: fluid, because lipids and many proteins drift sideways in their layer; mosaic, because proteins are scattered through it like tiles.
  • Be able to draw it: bilayer, integral and peripheral proteins, a glycoprotein and cholesterol, with the hydrophilic heads and hydrophobic core labelled.

The detail

  • The sugars face the fluid round the cell.
  • Their exact pattern differs between cell types and between individuals, so they act as identity tags.
  • Cell adhesion means sticking cells to each other.
  • In animal cells cholesterol sits among the phospholipids.

In the exam

  • When you draw the model, show the bilayer with heads and tails.

Examples

  • The ABO blood groups are glycolipid and glycoprotein sugars on red blood cells.
  • Immune cells read the sugars to tell self from non-self.

How we know

  • Models change when evidence demands it.
  • In the 1930s Davson and Danielli proposed a bilayer sandwiched between two continuous layers of protein, which matched the three-layer look of membranes in early electron micrographs.
  • Freeze-fracture, which splits a frozen membrane between its two layers, then showed proteins studded through the middle.
  • Experiments fusing a mouse cell with a human cell showed their membrane proteins mixing within minutes.
  • In 1972 Singer and Nicolson replaced the sandwich with the fluid mosaic model, which explained both.

Some membrane proteins and lipids carry short, branched chains of sugars. A protein with sugars attached is a glycoprotein and a lipid with sugars a glycolipid. The sugars are always on the outer side of the plasma membrane, facing the fluid round the cell. Their exact pattern differs between cell types and between individuals, so they act as identity tags: in cell recognition (the ABO blood groups are glycolipid and glycoprotein sugars on red blood cells, and immune cells read them to tell self from non-self) and in cell adhesion, sticking cells to each other.

All of this fits the fluid mosaic model. Fluid, because the phospholipids and many proteins drift sideways within their layer; mosaic, because the proteins are scattered through the bilayer like tiles. In animal cells cholesterol sits among the phospholipids. When you draw it, show the bilayer with heads and tails, integral and peripheral proteins, a glycoprotein, cholesterol, and label the hydrophilic heads and the hydrophobic core.

  • Glycoproteins and glycolipids: sugars on the outside, for recognition and adhesion.
  • Fluid: lipids and proteins move sideways. Mosaic: proteins scattered through it.
  • A full drawing: bilayer, integral and peripheral proteins, glycoprotein, cholesterol, regions labelled.
Nature of science Models change when evidence demands it. In the 1930s Davson and Danielli proposed a bilayer sandwiched between two continuous layers of protein, which matched the three-layer look of membranes in early electron micrographs. Then freeze-fracture, which splits a frozen membrane between its two layers, showed proteins studded through the middle, and experiments fusing a mouse cell with a human cell showed their membrane proteins mixing within minutes. In 1972 Singer and Nicolson replaced the sandwich with the fluid mosaic model, which explained both.

A mouse cell and a human cell are fused, each with its own membrane proteins tagged a different colour. What is seen after 40 minutes at 37 °C?

glycoproteinglycolipidchannelperipheralcholesterolOUTSIDECYTOPLASM

Tap any part of the membrane to see what it is.

B2.1.11 Relationships between fatty acid composition of lipid bilayers and their fluidity B2.1.12 Cholesterol and membrane fluidity in animal cells

Not too stiff, not too runny

  • Saturated tails are straight and pack tightly: higher melting points, a stronger, stiffer membrane at high temperatures.
  • Unsaturated tails have a kink at each double bond and pack loosely: lower melting points, a fluid, flexible membrane at the cell’s temperatures.
  • Organisms adjust the mix to their habitat, such as Antarctic icefish with many unsaturated fatty acids.
  • Cholesterol sits between the phospholipids and is a moderator: less fluid when warm, less stiff when cold.

The detail

  • A membrane has to be fluid enough to bend, to let its proteins move and to form vesicles, but firm enough to hold together. The fatty acid tails set the balance.
  • Cholesterol’s hydroxyl group sits by the heads and its rigid rings among the tails.
  • At high temperatures cholesterol holds the tails still and stops the membrane becoming too fluid.
  • At low temperatures it keeps the tails apart and stops them packing into a stiff solid.

Examples

  • Antarctic icefish live in water at about −2 °C. Their membranes carry a high share of unsaturated fatty acids, so they stay fluid where ours would set like cold butter.
  • Bacteria in hot springs go the other way, with more saturated tails to stop their membranes becoming too runny.

Watch out

  • Cholesterol does not simply “make membranes stiffer”. At low temperatures it does the opposite, so say what it does at each end.

A membrane has to be fluid enough to bend, to let its proteins move and to form vesicles, but firm enough to hold together. The fatty acid tails set the balance. Saturated tails are straight and pack tightly, so they have high melting points and make a membrane stronger and stiffer. Unsaturated tails have a kink at each double bond, so they cannot pack closely; they have lower melting points and keep a membrane fluid and flexible at the temperatures the cell lives at.

Organisms adjust the mix to their habitat. Antarctic icefish live in water at about −2 °C, and their membranes carry a high share of unsaturated fatty acids, so they stay fluid where ours would set like cold butter. Bacteria in hot springs go the other way, with more saturated tails to stop their membranes becoming too runny. In animal cells, cholesterol sits between the phospholipids, its hydroxyl group by the heads and its rigid rings among the tails. It is a moderator: at high temperatures it holds the tails still and stops the membrane becoming too fluid, and at low temperatures it keeps the tails apart and stops them packing into a stiff solid.

Cholesterol buffers fluidity
TemperatureEffect of cholesterolWhy
Lowincreases fluidityIt sits between the phospholipids and keeps their tails apart, so they cannot pack tightly and the membrane does not become too rigid.
Highdecreases fluidityIts rigid rings hold the neighbouring tails and restrain how much the phospholipids move, so the membrane does not become too fluid.
  • Saturated tails: straight, pack tightly, stiffer, stronger at high temperatures.
  • Unsaturated tails: kinked, pack loosely, fluid at low temperatures.
  • Cholesterol buffers fluidity: less fluid when warm, less stiff when cold.
Watch out Cholesterol does not simply "make membranes stiffer". At low temperatures it does the opposite, so say what it does at each end.

Goldfish kept at 5 °C for weeks are compared with goldfish kept at 25 °C. What would you expect in the membranes of the cold fish?

straight tails pack tightlykinks keep the tails apartcholesterolOUTSIDE

B2.1.13 Membrane fluidity and the fusion and formation of vesicles

Pinching off, joining up

  • Because a membrane is fluid, a patch can bend, pinch off as a sac, a vesicle, and close up with no hole left behind.
  • Endocytosis: the plasma membrane folds inwards round material outside and pinches off, carrying it in.
  • Exocytosis: a vesicle fuses with the plasma membrane, its bilayer joining the membrane’s, and releases its contents outside.
  • Both processes use energy from ATP.

The detail

  • Each time, membrane is moved too: exocytosis adds the vesicle’s membrane to the cell surface; endocytosis takes some away.
  • In exocytosis the vesicle travels to the plasma membrane before it fuses.

Examples

  • Endocytosis: phagocytes take in bacteria this way, and the gut cells of a newborn calf take in antibodies from milk.
  • Exocytosis: gland cells secrete digestive enzymes this way, and neurons release neurotransmitters.

Links across the course

  • The proteins that pull the membrane into a bud, such as clathrin in B2.2, need the bilayer to be fluid enough to curve.

Watch out

  • In exocytosis the vesicle does not burst on the surface. Its membrane becomes part of the plasma membrane.

Because a membrane is fluid, a patch of it can bend, pinch off as a small sac and close up again with no hole left behind. That sac is a vesicle. In endocytosis the plasma membrane folds inwards round material outside the cell and pinches off, carrying it in. Phagocytes take in bacteria this way, and the gut cells of a newborn calf take in antibodies from milk. In exocytosis a vesicle travels to the plasma membrane and fuses with it, its bilayer joining the membrane's, and its contents are released outside. Gland cells secrete digestive enzymes this way, and neurons release neurotransmitters.

Each time, membrane is moved too. Exocytosis adds the vesicle's membrane to the cell surface; endocytosis takes some away. The proteins that pull the membrane into a bud, such as clathrin in B2.2, need the bilayer to be fluid enough to curve. Both processes use energy from ATP.

  • Fluidity lets membranes bend, bud into vesicles and fuse.
  • Endocytosis: material taken in by a vesicle pinching off inwards.
  • Exocytosis: a vesicle fuses with the membrane and releases its contents.
Watch out In exocytosis the vesicle does not burst on the surface. Its membrane becomes part of the plasma membrane.

A pancreas cell secretes enzymes by exocytosis for an hour without taking any membrane back in. What happens to its plasma membrane?

material outside the cellfolds inaround the materialendocytosisa vesicle pinches offexocytosisa vesicle fuses, opensOUTSIDECYTOPLASM
  1. Material outside the cell, next to the plasma membrane.
  2. The fluid membrane folds in around it.
  3. The fold pinches off as a vesicle: endocytosis. The membrane closes behind it.
  4. The reverse: a vesicle fuses with the membrane and opens outside, releasing its contents: exocytosis.

B2.1.14 Gated ion channels in neurons B2.1.15 Sodium-potassium pumps as an example of exchange transporters

Gates and a pump in every neuron

  • A neurotransmitter-gated channel opens when a signalling molecule binds: acetylcholine opens the nicotinic acetylcholine receptor and Na+ enters.
  • A voltage-gated channel opens or closes when the membrane voltage changes, such as the Na+ and K+ channels of a nerve impulse.
  • The sodium-potassium pump is an exchange transporter: 3 Na+ out and 2 K+ in per ATP.
  • It builds the membrane potential, about −70 mV in a resting neuron.

The detail

  • Neurons depend on ion channels that open only when told to.
  • Acetylcholine binds to two sites on the nicotinic receptor, and the channel opens so sodium ions diffuse into the cell.
  • The voltage-gated sodium and potassium channels carry a nerve impulse along an axon.
  • For those channels to do anything there must be gradients to diffuse down. The sodium-potassium pump makes them.
  • Exchange transporter means one kind of ion out, another in.
  • The inside ends up negative because three positive charges leave for every two that enter, and because K+ leaks back out through channels.

One pump cycle

  • The pump binds three Na+ from inside.
  • It is phosphorylated by ATP, changes shape and releases the Na+ outside.
  • It binds two K+, loses the phosphate, changes back and releases the K+ inside.

Watch out

  • The pump moves both ions against their gradients: Na+ out to where Na+ is already high, K+ in to where K+ is already high.

Neurons depend on ion channels that open only when told to. A neurotransmitter-gated channel opens when a signalling molecule binds to it. The nicotinic acetylcholine receptor is one: when acetylcholine binds to its two sites, the channel opens and sodium ions diffuse into the cell. A voltage-gated channel opens or closes when the voltage across the membrane changes. The sodium and potassium channels that carry a nerve impulse along an axon are voltage-gated.

For those channels to do anything, there must be gradients to diffuse down. The sodium-potassium pump makes them. In each cycle it binds three Na+ from inside, is phosphorylated by ATP, changes shape, releases the Na+ outside, binds two K+, loses the phosphate, changes back and releases the K+ inside. It is an exchange transporter: one kind out, another in. Because three positive charges leave for every two that enter, and because K+ leaks back out through channels, the inside ends up negative: the membrane potential, about −70 mV in a resting neuron.

  • Neurotransmitter-gated: acetylcholine opens the nicotinic receptor, Na+ enters.
  • Voltage-gated: Na+ and K+ channels respond to the membrane voltage.
  • Na+/K+ pump: 3 Na+ out, 2 K+ in per ATP; builds the membrane potential.
Watch out The pump moves both ions against their gradients: Na+ out to where Na+ is already high, K+ in to where K+ is already high.

Ouabain stops the sodium-potassium pump. What happens over the next hours in a neuron treated with it?

binding siteemptyclosed: no ions passNa⁺acetylcholinebinds, so it opensNa⁺ diffuses in+ + + +− − − −voltage sensorsenses the chargeOUTSIDECYTOPLASM
One full cycle of the pump. Watch the order: what binds, when the phosphate comes on and off, and which way the pump opens each time.

B2.1.16 Sodium-dependent glucose cotransporters as an example of indirect active transport

Glucose hitches a ride

  • The Na+/K+ pump on the blood side uses ATP to keep Na+ low inside gut lining cells.
  • A sodium-glucose cotransporter (SGLT) lets Na+ in only with glucose: sodium going down its gradient drives glucose up its gradient.
  • This is indirect active transport: the ATP was spent by the pump, building the sodium gradient the cotransporter uses.
  • It absorbs glucose in the small intestine and takes glucose back from the filtrate in the nephron.

The detail

  • Glucose in the small intestine has to be absorbed even when there is more glucose inside the gut lining cells than in the gut. That is uphill.
  • No ATP is spent at the transporter that does it.
  • Sodium in the gut is high, so it tends to diffuse in.
  • The SGLT sits on the gut side of the cell.
  • Glucose then leaves the cell on the blood side by facilitated diffusion.
  • In the nephron the same system means no glucose is lost in urine.

Watch out

  • The cotransporter itself does not use ATP.
  • If the pump stops, the cotransporter stops too, because the sodium gradient runs down.

Glucose in the small intestine has to be absorbed even when there is more glucose inside the gut lining cells than in the gut. That is uphill, but no ATP is spent at the transporter that does it. Instead, the sodium-potassium pump on the blood side of each cell keeps the sodium concentration inside low. Sodium in the gut is high, so it tends to diffuse in.

A sodium-glucose cotransporter (SGLT) on the gut side lets a sodium ion in only if a glucose molecule comes with it. The sodium going down its gradient drives the glucose up its gradient. Glucose then leaves the cell on the blood side by facilitated diffusion. This is indirect active transport: the energy comes from ATP, but it was spent by the pump, building the sodium gradient that the cotransporter uses. The same system in the kidney's nephron takes glucose back out of the filtrate, so none is lost in urine.

  • The Na+/K+ pump keeps Na+ low inside, using ATP.
  • SGLT: Na+ in down its gradient carries glucose in against its gradient.
  • Indirect active transport: in the small intestine and in the nephron.
Watch out The cotransporter itself does not use ATP. If the pump stops, the cotransporter stops too, because the sodium gradient runs down.

Why does glucose appear in the urine when blood glucose is very high, as in untreated diabetes?

gut lumengut lining cellbloodNa⁺K⁺Na⁺/K⁺ pumpkeeps Na⁺ low insideNa⁺Na⁺cotransporterNa⁺ brings glucoseglucoseinto blood
  1. On the blood side, the Na+/K+ pump uses ATP and keeps Na+ low inside the cell.
  2. On the gut side, the cotransporter lets Na+ in down its gradient, and glucose comes with it.
  3. Glucose leaves on the blood side by facilitated diffusion.

B2.1.17 Adhesion of cells to form tissues

Holding tissues together

  • Cells in a tissue are joined to their neighbours by cell-adhesion molecules (CAMs).
  • CAMs are plasma membrane proteins whose outer parts bind to CAMs on the next cell, or to the material between cells.
  • Different forms of CAM make different kinds of junction: some seal gaps, some anchor cells, some let cells pass signals.

The detail

  • Sealing: CAMs packed in a line near the top of gut lining cells close the gap between them, so the gut’s contents cannot leak between the cells and must pass through them.
  • Anchoring: CAMs bind across the gap and are tied inside to the cytoskeleton, so tissues such as skin and heart muscle hold together when stretched.

In the exam

  • You do not need to know the names of the CAMs or the junctions, only that different CAMs make different joins.

Links across the course

  • Contents that cannot leak between gut cells pass through them by the transport proteins of the last chapter.

Watch out

  • CAMs are not the sugar tags of chapter 6, though glycoproteins can help cells stick. CAMs are the proteins that make the junctions themselves.

Cells in a tissue are joined to their neighbours. The joins are made by cell-adhesion molecules (CAMs): proteins in the plasma membrane whose outer parts bind to CAMs on the next cell, or to the material between cells. Different forms of CAM make different kinds of junction.

Some junctions seal: CAMs packed in a line near the top of gut lining cells close the gap between them, so the gut's contents cannot leak between the cells and must pass through them, by the transport proteins of the last chapter. Others anchor: CAMs bind across the gap and are tied inside to the cytoskeleton, so tissues such as skin and heart muscle hold together when stretched. Others again let cells pass signals. You do not need to know the names of the CAMs or the junctions, only that different CAMs make different joins.

  • CAMs: membrane proteins that bind cells to each other.
  • Different forms of CAM make different junctions.
  • Some seal gaps, some anchor cells against pulling forces.
Watch out CAMs are not the sugar tags of chapter 6, though glycoproteins can help cells stick. CAMs are the proteins that make the junctions themselves.

Cancer cells that spread round the body often make less of one kind of CAM. Why might that help them spread?

cell 1cell 2sealingjunctionanchoringjunction

Tap a junction between the two cells.

02Dry lab: The membrane fluidity bench

Bleach a spot on a membrane whose lipids glow and time how fast it lights up again. Change the temperature, the unsaturated fatty acids and the cholesterol, and plot what each does to fluidity.

temperaturehalf time, t½37 °C2.1 sSIDE VIEWTOP VIEWglowing taglaser
The bench: a laser bleaches a spot on a membrane with glowing lipids. The faster the lipids move, the sooner the spot glows again. The half time of recovery, t½, measures fluidity: short t½, fluid membrane.
Your questionHow do temperature, unsaturated fatty acids and cholesterol change how freely the lipids in a membrane move? Predict first: will cholesterol make a membrane at 0 °C more fluid or less?
What you can changeThe temperature (0 to 45 °C), the share of the fatty acids that are unsaturated (20 to 80%) and the cholesterol (none, some or a lot). Each press bleaches three spots, so you have repeats.
What to recordThe recovery half time t½ of each spot: the seconds its brightness takes to get halfway back. A short t½ means a fluid membrane. The numbers are invented to show the pattern real membranes follow; the method, fluorescence recovery after photobleaching, is real.

Find out

  • Warm it up. Keep 40% unsaturated and no cholesterol. Bleach spots at every temperature from 0 to 45 °C. Where does the half time change most steeply, and what is happening to the tails there?
  • Add kinks. Repeat at 80% unsaturated. How does the curve move, and why do icefish membranes look like this one?
  • Add cholesterol. Repeat 40% unsaturated with a lot of cholesterol. Compare the two lines at 0 °C and at 37 °C. Is cholesterol making the membrane more fluid or less?
  • Design a membrane. Find a mix that keeps t½ between 3 and 10 s from 10 to 45 °C. Which ingredient made the biggest difference?

Record

  • For each spot: the temperature, the unsaturated share, the cholesterol and the recovery half time t½ in seconds.
  • For each membrane and temperature: the mean t½ of the three spots and their range.
  • A graph of mean t½ against temperature, one line for each membrane, and a sentence on each line's shape.
  • Download the CSV to keep every spot.

One membrane gives t½ = 2 s at 37 °C and another gives t½ = 9 s. Which is more fluid?

Without cholesterol, t½ falls from 32 s at 10 °C to 2 s at 30 °C. With a lot of cholesterol it falls from 11 s to 5 s. What does this show?

Why does each press bleach three spots rather than one?

Back to living cells

An Antarctic icefish lives in water at about −2 °C, and your own cells work at 37 °C. Use your results to explain what you would expect of the fatty acids in the membranes of the icefish, and what cholesterol does for the membranes of animal cells.

03Check

A fresh paper from the exam bank on this guide's topics each time: past-paper style questions, marked as you go, and saved to your Exam practice progress when you are signed in.

Exam practice

Exam questions on B2.1, marked

Start 15 marks of exam questionsYour exam practice

B2.1 revision mapB2.1 exam questionsB2.1 multiple choice quizB2.1 HL multiple choice quizB2.1 pub quizCells and transport escape roomB2.1 Tarsia puzzleB2.1 dominoesBack: B1.1 lipidsNext: B2.2 organellesNext: D2.3 water potential

04Downloads

Take the guide with you, or into a classroom with no internet.

05Teacher resources

The guide as four one-hour lessons, and two more at higher level. Each has a plan to print (the timings, what to project and where to stop, the activities with what they need, what students get wrong) and slides to teach it from, in the same order, with the teacher's moves in the notes.

LessonCoversFocusChaptersLesson planSlides
1A wall two molecules thick B2.1.1 to B2.1.360 min Why phospholipids form a bilayer, the bilayer as a barrier, and simple diffusion of oxygen and carbon dioxide 1, 2 Lesson planPDF 626 KB SlidesPPTX 8.2 MB
2The proteins decide B2.1.4 to B2.1.860 min Integral and peripheral proteins, osmosis and aquaporins, channels, pumps and selective permeability 3, 4, 5 Teacher pass: Lesson planPDF 642 KB Teacher pass: SlidesPPTX 1.3 MB
3Drawing the mosaic B2.1.9 to B2.1.1060 min Glycoproteins and glycolipids, and drawing the fluid mosaic model with its hydrophilic and hydrophobic regions 6 Teacher pass: Lesson planPDF 558 KB Teacher pass: SlidesPPTX 108 KB
4Show it moving B2.1.1 to B2.1.1060 min Consolidating membrane structure and transport with a stop-motion animation and practice questions 1, 2, 3, 4, 5, 6 Teacher pass: Lesson planPDF 669 KB Teacher pass: SlidesPPTX 9.6 MB
5Fluid enough HL B2.1.11 to B2.1.1360 min Fatty acids and cholesterol in membrane fluidity, and vesicles in endocytosis and exocytosis 7, 8, dry lab Teacher pass: Lesson planPDF 614 KB Teacher pass: SlidesPPTX 884 KB
6Gates, pumps and partners HL B2.1.14 to B2.1.1760 min Gated channels, the sodium-potassium pump, sodium-glucose cotransport and cell adhesion molecules 9, 10, 11 Teacher pass: Lesson planPDF 654 KB Teacher pass: SlidesPPTX 2.1 MB

Lesson 1 is free with a free account. The other plans and slides, for every guide, come with the Teacher pass.

The note template, the revision sheet and the offline copy are in Downloads, for you and the class.

PRACTISE AND REVISE

Make it for your class, or set it

Build for your class

Already on the site for B2.1

Card sets on splycr

Open a set to host it as a class game, or make a copy to edit.

How this was made. The course structure, the activities and the teaching choices come from my own classroom, my presentations and my years of teaching IB and AP Biology. I use Claude, an AI, to help write and build the interactive guides, lesson plans, slides and practice questions, and to draw the diagrams and code the interactives. I direct the work and review it against the IB and AP specifications before it goes live. Sources and acknowledgements.