Biology  by Bradford
support

Home / AP Biology revision sheets / Unit 3: Cellular energetics / 3.1 to 3.3

AP Biology Unit 3: Enzymes and cellular energy, revision notes on two pages

Topics 3.1 to 3.3 of AP Biology (Cellular energetics), cut down to the core: what to know, what to draw and what to say, with the codes of the Fall 2025 course framework. Read it here, or print it double sided as one sheet. The pages are A4: on US Letter, print with Fit to page.

Download the PDFRead the full guidePractice exam questionsAll 30 AP sheets in one guide

AP BiologyUnit 3Topics 3.1 to 3.3Revision on two pages

Enzymes and energy

What to know, what to draw and what to say. Nothing else.

+−−+−+substratelook-alikecharges repelwrong shapecannot enter+−enzymeactive site

Draw it like this. Site and substrate are complementary, like a mold and what fills it: never "the same shape".

3.1.AStart here

The active site fits one substrate

  • An enzyme is a biological catalyst: a protein that speeds up one reaction and is not used up. It lets go of the products unchanged and binds the next substrate.
  • The active site is a small pocket in the folded 3D shape, lined by a few R groups. The molecule the enzyme works on is its substrate.
  • A substrate binds only if its shape fits the site and its charges are compatible with those R groups. That double check makes an enzyme specific: lactase splits lactose and leaves sucrose alone.
  • Induced fit: as the substrate settles in, the site shifts to grip it more tightly.
How the site lowers the activation energy
1Holdsthe substrate in exactly the right position
2Strainsthe bond that has to break
3Pullselectrons, with charged R groups
3.1.ACatalysis

Lower activation energy, same ΔG

  • Breaking a bond takes energy in. So even a reaction that releases energy must first be pushed over a hump: the activation energy.
  • An enzyme lowers the activation energy, so far more molecules get over each second. It supplies no energy of its own.
  • The free energy of the reactants and of the products, and so ΔG, stays the same. An enzyme cannot make an uphill reaction go, and it speeds the reverse reaction just as much.
free energyprogress of the reactionreactantsproductsno enzymewith enzymeΔG
3.2.B

Substrate: up to a limit

  • More substrate means more collisions between substrate and free active sites, so the rate climbs.
  • When every site is refilled the moment it empties, the enzyme is saturated and the rate levels off. Only more enzyme raises it.
  • As substrate is used up and product builds up, the rate falls. An enzyme speeds a reversible reaction whichever way the concentrations favor.
ratesubstrate concentrationtwice the enzymeevery site is busysubstrate is the limit
3.2.A, 3.2.B

Temperature

  • Rising side: molecules move faster, so collisions are more frequent and carry more energy. Most human enzymes peak near 37 to 40 °C.
  • Falling side: past the optimum, the weak bonds that hold the shape break. The active site changes shape and the substrate no longer fits: denatured.
  • Denaturing breaks bonds between R groups, not peptide bonds. It can reverse, but after heat the chains tangle: usually permanent.
ratetemperatureoptimummorecollisionsdenatured
3.2.A, 3.2.B

pH

  • The pH scale is logarithmic: each step down is ten times more H⁺.
  • A little off the optimum: R groups in the site gain or lose H⁺, their charges change and the substrate is held less well. This reverses when the pH returns.
  • Far off it: the ionic and hydrogen bonds that hold the fold break too, and the enzyme denatures.
  • Each optimum suits the place: pepsin near pH 2 in the stomach, trypsin near pH 8 in the small intestine.
rate24681012pHpepsintrypsinstomachintestine

Five things change the rate, SPITE: Substrate, pH, Inhibitors, Temperature, Enzyme. Spicy Peppers Irritate Tired Eyes.

Biology by Bradford3.1 to 3.3 Enzymes and cellular energy · 1 of 2 · turn over for inhibitors and ATP
Inhibitors, ATP and pathways
AP BiologyUnit 3
3.2.B

Inhibitors: block the site, or bend it

  • An inhibitor binds to an enzyme and slows it down. A graph of rate against substrate concentration tells the two kinds apart.
  • A competitive inhibitor fits the active site, so the substrate cannot bind. The two take turns: add enough substrate and the rate climbs back to nearly its normal maximum.
  • A noncompetitive inhibitor binds an allosteric site (any site that is not the active site) and changes the enzyme's shape, active site included. No amount of substrate wins those enzymes back.
  • Most inhibitors bind reversibly. Some bond for good: penicillin, on a bacterial cell wall enzyme.
ratesubstrate concentrationno inhibitorcompetitivenoncompetitive

Competitive the active site

Same maximum rate, but more substrate is needed to reach it. Zanamivir, a flu drug, fills the active site of the virus's neuraminidase.

Noncompetitive an allosteric site

Lower maximum rate, whatever the substrate concentration. Isoleucine does this to the first enzyme of its own pathway.

3.3.A

Staying alive takes constant energy

  • A cell is highly ordered. It keeps that order only by taking in energy, from food or light, faster than it loses energy. Cut off the flow, or lose the order, and the cell dies.
  • Second law of thermodynamics: every energy transfer turns some energy into heat, and the disorder of the universe increases. A cell pays for its order with the heat and disorder it releases.
  • A cell runs an endergonic reaction by coupling it to an exergonic one, usually the hydrolysis of ATP, its energy currency.
  • Exergonic reactions release free energy (ΔG negative): breaking down glucose. Endergonic ones need it put in (ΔG positive): building a protein.
+14making glutamineuphill+−31splitting ATPdownhill=−17coupleddownhill: it runs

ΔG in kJ/mol. EXergonic: energy EXits. ENdergonic: energy ENters.

3.3.B

Pathways run in small steps

  • A metabolic pathway is a chain of reactions, each with its own enzyme: the product of one step is the substrate of the next.
  • Small steps release energy a little at a time, so the cell can capture it as ATP and control it. Burned, glucose gives it all up at once as heat and light.
  • Feedback inhibition: the end product binds an allosteric site on the pathway's first enzyme and switches it off. It binds reversibly: as the product is used up it lets go and the enzyme works again. This is negative feedback, so nothing is wasted.
  • Bacteria, archaea and eukaryotes all run on ATP and on versions of glycolysis. Pathways conserved in every domain are evidence of common ancestry.
enzyme 1enzyme 2enzyme 3substrateend productbinds an allosteric site: enzyme 1 off
Watch out

Five mistakes that cost points

  • Breaking bonds takes energy in. Energy is released when new, more stable bonds form.
  • An enzyme never changes ΔG. It lowers the activation energy: the route, not the destination.
  • A plateau is not denaturing. Every enzyme is still working, flat out. Add more and the rate climbs.
  • Cold does not denature. At 5 °C an enzyme is slow but whole, and works normally once warmed.
  • ATP is not a spring. Its hydrolysis releases energy because ADP and phosphate are more stable than ATP and water were.
Cover the sheet

Can you answer these?

  • Explain why lactase splits lactose but not sucrose.
  • Describe what an enzyme does to ΔG.
  • Explain why rate levels off at high substrate.
  • Explain why rate falls above the optimum temperature.
  • Predict the rate of pepsin once it reaches pH 8. Justify it.
  • Identify the inhibitor that excess substrate can overcome.
  • Calculate ΔG: a +20 kJ/mol step coupled to ATP hydrolysis.
  • Explain how an end product switches off its own pathway.
In the exam

Chain the cause: the condition, the bonds or charges it changes, the shape of the active site, whether the substrate binds, then the rate. "It denatures" alone explains nothing.

Go further

Animated figures, a dry lab and a marked Check are in the full guide online.

Biology by Bradford · AP Biology, Fall 2025Unit 3 · 3.1 to 3.3 · 2 of 2 · biologybybradford.com/guides

Key terms: Enzymes and cellular energy

The 18 terms the guide to topics 3.1 to 3.3 defines. Each is explained where it is first used in the full guide.

ΔG
The change in free energy in a reaction. Negative when free energy is released (exergonic), positive when it must be put in (endergonic).
activation energy
The energy reactants must take in before a reaction can start: enough to strain and begin to break their bonds.
active site
The pocket on an enzyme where the substrate binds and the reaction happens. Its shape and its charges match the substrate.
allosteric site
A binding site on an enzyme other than the active site. A molecule binding there changes the enzyme's shape, and so its activity.
competitive inhibitor
An inhibitor that binds in the active site itself, because its shape resembles the substrate's, so the two compete for the site.
coupling
Linking a reaction that releases energy to one that needs it, so that together they release energy and run.
denatured
Changed in shape because the weak bonds holding the folded chain have broken, so the active site no longer works. The amino acid sequence is not changed.
endergonic
Needing free energy put in: the products hold more free energy than the reactants, and ΔG is positive.
enzyme
A protein that speeds up one chemical reaction in a cell and comes out of it unchanged, ready to work again.
exergonic
Releasing free energy: the products hold less free energy than the reactants, and ΔG is negative.
feedback inhibition
Control in which the end product of a pathway inhibits an enzyme early in the pathway, so the product limits its own production.
induced fit
The change in shape of an active site as the substrate binds. The site closes around the substrate and strains its bonds.
metabolic pathways
A series of reactions in which the product of each step is the substrate of the next, each step catalyzed by its own enzyme.
noncompetitive inhibitor
An inhibitor that binds somewhere other than the active site and changes the enzyme's shape, so the active site works less well.
optimum
The temperature, or pH, at which an enzyme works fastest.
saturated
Working flat out: every active site is occupied all the time, so more substrate cannot raise the rate.
specific
Acting on one substrate, or a few very similar ones, because only they fit the active site.
substrate
The molecule an enzyme acts on. It binds in the active site and is turned into products.

Keep going

The full guideEvery idea explained, with animations, dry labs and quick checks. Unit 3: Cellular energeticsEvery guide in the unit, a keyword bank and a review. Exam questionsAP style questions on Unit 3, with scoring guidelines. Revision map: 3.1 EnzymesLabel, fill in and complete the whole topic. Revision map: 3.2 Environmental Impacts on Enzyme FunctionLabel, fill in and complete the whole topic. Revision map: 3.3 Cellular EnergyLabel, fill in and complete the whole topic. Escape room: The Kelp Light HabitatFive locks on Unit 3, for a class or a study group. Exam practiceA paper pitched to you, marked as you go. Before: 2.9, 2.10 Compartments and their originsThe sheet before this one. Next: 3.4 PhotosynthesisThe sheet after this one.

Unit 3: cellular energetics